Add LEDs definition example for qca8k using the offload trigger as the
default trigger and add all the supported offload triggers by the
switch.
Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
.../devicetree/bindings/net/dsa/qca8k.yaml | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 48de0ace265d..d8394f625d03 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -64,6 +64,8 @@ properties:
internal mdio access is used.
With the legacy mapping the reg corresponding to the internal
mdio is the switch reg with an offset of -1.
+ Each phy have at least 3 LEDs connected and can be declared
+ using the standard LEDs structure.
properties:
'#address-cells':
@@ -340,6 +342,34 @@ examples:
internal_phy_port1: ethernet-phy@0 {
reg = <0>;
+
+ leds {
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ linux,default-trigger = "offload-phy-activity";
+ linux,supported-offload-triggers = "rx-blink", "tx-blink", "ollision-blink",
+ "link-10M", "link-100M", "link-1000M",
+ "half-duplex", "full-duplex", "linkup-over",
+ "power-on-reset", "blink-2hz", "blink-4hz",
+ "blink-8hz", "blink-auto";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ linux,default-trigger = "offload-phy-activity";
+ linux,supported-offload-triggers = "rx-blink", "tx-blink", "ollision-blink",
+ "link-10M", "link-100M", "link-1000M",
+ "half-duplex", "full-duplex", "linkup-over",
+ "power-on-reset", "blink-2hz", "blink-4hz",
+ "blink-8hz", "blink-auto";
+ };
+ };
};
internal_phy_port2: ethernet-phy@1 {
--
2.32.0
