[PATCH v3 5/5] ARM: dts: OMAP5: Add device nodes for ABB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@xxxxxx>

Add ABB device nodes for OMAP5 family of devices. Data is based on
OMAP543x Technical Reference Manual revision U (April 2013).
NOTE: clock node has been disabled in this patch due to the lack of
OMAP5 clock data.

[nm@xxxxxx: co-developer]
Signed-off-by: Nishanth Menon <nm@xxxxxx>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@xxxxxx>
---
 arch/arm/boot/dts/omap5.dtsi |   67 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 3dd7ff8..a9d86d2 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -667,5 +667,72 @@
 				ctrl-module = <&omap_control_usb>;
 			};
 		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			/* clocks = <&sysclk_in>; - once we have clock data */
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+			      <0x4a0021ac 0x18>, <0x4ae0C318 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			880000		0	0x4	0 0x20000000 0x1F000000
+			1060000		0	0x8	0 0x20000000 0x1F000000
+			1250000		0	0x10	0 0x20000000 0x1F000000
+			1260000		1	0x14	0 0x20000000 0x1F000000
+			>;
+
+			status = "disabled";
+		};
+
+		abb_mm: regulator-abb-mm {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_iva";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			/* clocks = <&sysclk_in>; - once we have clock data */
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+			      <0x4a002194 0x14>, <0x4ae0C314 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80000000>;
+			/* LDOVBBMM_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMM_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			880000		0	0x4	0 0x20000000 0x1F000000
+			1025000		0	0x8	0 0x20000000 0x1F000000
+			1120000		1	0x10	0 0x20000000 0x1F000000
+			>;
+
+			status = "disabled";
+		};
 	};
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux