Hi Laurent,
Thanks for the review.
On Thu, May 2, 2013 at 4:32 PM, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Thursday 02 May 2013 12:34:25 Prabhakar Lad wrote:
>> On Thu, May 2, 2013 at 12:25 PM, Sascha Hauer wrote:
>> > On Thu, May 02, 2013 at 11:52:34AM +0530, Prabhakar Lad wrote:
>> >> From: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
>> >>
>> >> add OF support for the mt9p031 sensor driver.
>> >> Alongside this patch sorts the header inclusion alphabetically.
>>
>> [Snip]
>>
>> >> +#if defined(CONFIG_OF)
>> >> +static struct mt9p031_platform_data *
>> >> + mt9p031_get_pdata(struct i2c_client *client)
>
> Please align this line on the left.
>
OK
>> >> +{
>> >> + if (client->dev.of_node) {
>> >
>> > By inverting the logic here and returning immediately you can safe an
>> > indention level for the bulk of this function.
>>
>> OK
>>
>> >> + struct device_node *np;
>> >> + struct mt9p031_platform_data *pdata;
>> >> +
>> >> + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
>> >> + if (!np)
>> >> + return NULL;
>> >> +
>> >> + pdata = devm_kzalloc(&client->dev,
>> >> + sizeof(struct mt9p031_platform_data),
>> >> + GFP_KERNEL);
>> >> + if (!pdata) {
>> >> + dev_err(&client->dev,
>> >> + "mt9p031 failed allocate memeory\n");
>> >> + return NULL;
>> >
>> > s/memeory/memory/
>> >
>> > Better drop this message completely. If you are really out of memory
>> > you'll notice it quite fast anyway.
>>
>> alright I'll drop the message.
>>
>> >> + }
>> >> + pdata->reset = of_get_named_gpio(client->dev.of_node,
>> >> + "gpio-reset", 0);
>> >> + if (!gpio_is_valid(pdata->reset))
>> >> + pdata->reset = -1;
>
> I've just sent a patch that converts the manual -1 checks in the driver to
> gpio_is_valid(). You can thus drop these two lines.
>
OK I'll drop this check.
>> >> + if (of_property_read_u32(np, "input-clock-frequency",
>> >> + &pdata->ext_freq))
>> >> + return NULL;
>> >> +
>> >> + if (of_property_read_u32(np, "pixel-clock-frequency",
>> >> + &pdata->target_freq))
>> >> + return NULL;
>> >
>> > returning NULL here means that when these properties are missing the
>> > driver bails out with the message "No platform data\n" which is not
>> > very helpful for users. How about just ignoring this here and return
>> > pdata? The driver will probably print a more useful message later when
>> > it notices that the clock params are invalid.
>>
>> Yes would be good idea of not returning NULL.
>>
>> >> +
>> >> + return pdata;
>> >> + }
>> >> +
>> >> + return client->dev.platform_data;
>> >> +}
>> >> +#else
>> >> +static struct mt9p031_platform_data *
>> >> + mt9p031_get_pdata(struct i2c_client *client)
>> >> +{
>> >> + return client->dev.platform_data;
>> >> +}
>> >> +#endif
>> >> +
>> >>
>> >> static int mt9p031_probe(struct i2c_client *client,
>> >> const struct i2c_device_id *did)
>> >> {
>> >> - struct mt9p031_platform_data *pdata = client->dev.platform_data;
>> >> + struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client);
>> >>
>> >> struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
>> >> struct mt9p031 *mt9p031;
>> >> unsigned int i;
>> >> @@ -1070,8 +1120,16 @@ static const struct i2c_device_id mt9p031_id[] = {
>> >>
>> >> };
>> >> MODULE_DEVICE_TABLE(i2c, mt9p031_id);
>> >>
>> >> +static const struct of_device_id mt9p031_of_match[] = {
>> >> + { .compatible = "aptina,mt9p031", },
>> >> + { .compatible = "aptina,mt9p031m", },
>> >> + {},
>> >> +};
>> >
>> > I would have expected something like:
>> >
>> > static const struct of_device_id mt9p031_of_match[] = {
>> > {
>> > .compatible = "aptina,mt9p031-sensor",
>> > .data = (void *)MT9P031_MODEL_COLOR,
>> > }, {
>> > .compatible = "aptina,mt9p031m-sensor",
>> > .data = (void *)MT9P031_MODEL_MONOCHROME,
>> > }, {
>> > /* sentinel */
>> > },
>> > };
>> >
>> > of_id = of_match_device(mt9p031_of_match, &client->dev);
>> > if (of_id)
>> > mt9p031->model = (enum mt9p031_model)of_id->data;
>> >
>> > To handle monochrome sensors.
>>
>> OK will do the same.
>
> And please guard the table with #ifdef CONFIG_OF.
>
But guarding the table #ifdef CONFIG_OF would cause compilation failure
for below code when CONFIG_OF is undefined in probe
of_id = of_match_device(of_match_ptr(mt9p031_of_match),
&client->dev);
if (of_id)
mt9p031->model = (enum mt9p031_model)of_id->data;
and also in mt9p031_i2c_driver structure,
of_match_table = of_match_ptr(mt9p031_of_match),
which force me to define mt9p031_of_match to NULL when
CONFIG_OF is undefined
Regards,
--Prabhakar Lad
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
