This driver exposes a standard TTY interface on top of the rpmsg
framework through a rpmsg service.
This driver supports multi-instances, offering a /dev/ttyRPMSGx entry
per rpmsg endpoint.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
---
Documentation/serial/tty_rpmsg.rst | 15 ++
drivers/tty/Kconfig | 9 +
drivers/tty/Makefile | 1 +
drivers/tty/rpmsg_tty.c | 275 +++++++++++++++++++++++++++++
4 files changed, 300 insertions(+)
create mode 100644 Documentation/serial/tty_rpmsg.rst
create mode 100644 drivers/tty/rpmsg_tty.c
diff --git a/Documentation/serial/tty_rpmsg.rst b/Documentation/serial/tty_rpmsg.rst
new file mode 100644
index 000000000000..b055107866c9
--- /dev/null
+++ b/Documentation/serial/tty_rpmsg.rst
@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========
+RPMsg TTY
+=========
+
+The rpmsg tty driver implements serial communication on the RPMsg bus to makes possible for
+user-space programs to send and receive rpmsg messages as a standard tty protocol.
+
+The remote processor can instantiate a new tty by requesting a "rpmsg-tty" RPMsg service.
+
+The "rpmsg-tty" service is directly used for data exchange. No flow control is implemented.
+
+Information related to the RPMsg and associated tty device is available in
+/sys/bus/rpmsg/devices/.
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 23cc988c68a4..5095513029d7 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -368,6 +368,15 @@ config VCC
source "drivers/tty/hvc/Kconfig"
+config RPMSG_TTY
+ tristate "RPMSG tty driver"
+ depends on RPMSG
+ help
+ Say y here to export rpmsg endpoints as tty devices, usually found
+ in /dev/ttyRPMSGx.
+ This makes it possible for user-space programs to send and receive
+ rpmsg messages as a standard tty protocol.
+
endif # TTY
source "drivers/tty/serdev/Kconfig"
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index a2bd75fbaaa4..07aca5184a55 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o
obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o
obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o
obj-$(CONFIG_VCC) += vcc.o
+obj-$(CONFIG_RPMSG_TTY) += rpmsg_tty.o
obj-y += ipwireless/
diff --git a/drivers/tty/rpmsg_tty.c b/drivers/tty/rpmsg_tty.c
new file mode 100644
index 000000000000..0c99f54c2911
--- /dev/null
+++ b/drivers/tty/rpmsg_tty.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ */
+
+#include <linux/module.h>
+#include <linux/rpmsg.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#define MAX_TTY_RPMSG 32
+
+static DEFINE_IDR(tty_idr); /* tty instance id */
+static DEFINE_MUTEX(idr_lock); /* protects tty_idr */
+
+static struct tty_driver *rpmsg_tty_driver;
+
+struct rpmsg_tty_port {
+ struct tty_port port; /* TTY port data */
+ int id; /* TTY rpmsg index */
+ struct rpmsg_device *rpdev; /* rpmsg device */
+};
+
+static int rpmsg_tty_cb(struct rpmsg_device *rpdev, void *data, int len, void *priv, u32 src)
+{
+ struct rpmsg_tty_port *cport = dev_get_drvdata(&rpdev->dev);
+ int copied;
+
+ if (!len)
+ return -EINVAL;
+ copied = tty_insert_flip_string(&cport->port, data, len);
+ if (copied != len)
+ dev_dbg(&rpdev->dev, "Trunc buffer: available space is %d\n",
+ copied);
+ tty_flip_buffer_push(&cport->port);
+
+ return 0;
+}
+
+static int rpmsg_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct rpmsg_tty_port *cport = idr_find(&tty_idr, tty->index);
+
+ if (!cport) {
+ dev_err(tty->dev, "Cannot get cport\n");
+ return -ENODEV;
+ }
+
+ tty->driver_data = cport;
+
+ return tty_port_install(&cport->port, driver, tty);
+}
+
+static int rpmsg_tty_open(struct tty_struct *tty, struct file *filp)
+{
+ return tty_port_open(tty->port, tty, filp);
+}
+
+static void rpmsg_tty_close(struct tty_struct *tty, struct file *filp)
+{
+ return tty_port_close(tty->port, tty, filp);
+}
+
+static int rpmsg_tty_write(struct tty_struct *tty, const u8 *buf, int len)
+{
+ struct rpmsg_tty_port *cport = tty->driver_data;
+ struct rpmsg_device *rpdev;
+ int msg_max_size, msg_size;
+ int ret;
+
+ rpdev = cport->rpdev;
+
+ dev_dbg(&rpdev->dev, "Send msg from tty->index = %d, len = %d\n", tty->index, len);
+
+ msg_max_size = rpmsg_get_mtu(rpdev->ept);
+ if (msg_max_size < 0)
+ return msg_max_size;
+
+ msg_size = min(len, msg_max_size);
+
+ /*
+ * Use rpmsg_trysend instead of rpmsg_send to send the message so the caller is not
+ * hung until a rpmsg buffer is available. In such case rpmsg_trysend returns -ENOMEM.
+ */
+ ret = rpmsg_trysend(rpdev->ept, (void *)buf, msg_size);
+ if (ret) {
+ dev_dbg(&rpdev->dev, "rpmsg_send failed: %d\n", ret);
+ return ret;
+ }
+
+ return msg_size;
+}
+
+static unsigned int rpmsg_tty_write_room(struct tty_struct *tty)
+{
+ struct rpmsg_tty_port *cport = tty->driver_data;
+ int size;
+
+ size = rpmsg_get_mtu(cport->rpdev->ept);
+ if (size < 0)
+ return 0;
+
+ return size;
+}
+
+static const struct tty_operations rpmsg_tty_ops = {
+ .install = rpmsg_tty_install,
+ .open = rpmsg_tty_open,
+ .close = rpmsg_tty_close,
+ .write = rpmsg_tty_write,
+ .write_room = rpmsg_tty_write_room,
+};
+
+static struct rpmsg_tty_port *rpmsg_tty_alloc_cport(void)
+{
+ struct rpmsg_tty_port *cport;
+ int err;
+
+ cport = kzalloc(sizeof(*cport), GFP_KERNEL);
+ if (!cport)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&idr_lock);
+ cport->id = idr_alloc(&tty_idr, cport, 0, MAX_TTY_RPMSG, GFP_KERNEL);
+ mutex_unlock(&idr_lock);
+
+ if (cport->id < 0) {
+ err = cport->id;
+ kfree(cport);
+ return ERR_PTR(err);
+ }
+
+ return cport;
+}
+
+static void rpmsg_tty_release_cport(struct rpmsg_tty_port *cport)
+{
+ mutex_lock(&idr_lock);
+ idr_remove(&tty_idr, cport->id);
+ mutex_unlock(&idr_lock);
+
+ kfree(cport);
+}
+
+static const struct tty_port_operations rpmsg_tty_port_ops = { };
+
+static int rpmsg_tty_probe(struct rpmsg_device *rpdev)
+{
+ struct rpmsg_tty_port *cport;
+ struct device *dev = &rpdev->dev;
+ struct device *tty_dev;
+ int ret;
+
+ cport = rpmsg_tty_alloc_cport();
+ if (IS_ERR(cport)) {
+ dev_err(dev, "Failed to alloc tty port\n");
+ return PTR_ERR(cport);
+ }
+
+ tty_port_init(&cport->port);
+ cport->port.ops = &rpmsg_tty_port_ops;
+
+ tty_dev = tty_port_register_device(&cport->port, rpmsg_tty_driver,
+ cport->id, dev);
+ if (IS_ERR(tty_dev)) {
+ dev_err(dev, "Failed to register tty port\n");
+ ret = PTR_ERR(tty_dev);
+ goto err_destroy;
+ }
+
+ cport->rpdev = rpdev;
+
+ dev_set_drvdata(dev, cport);
+
+ dev_dbg(dev, "New channel: 0x%x -> 0x%x : ttyRPMSG%d\n",
+ rpdev->src, rpdev->dst, cport->id);
+
+ return 0;
+
+err_destroy:
+ tty_port_destroy(&cport->port);
+ rpmsg_tty_release_cport(cport);
+
+ return ret;
+}
+
+static void rpmsg_tty_remove(struct rpmsg_device *rpdev)
+{
+ struct rpmsg_tty_port *cport = dev_get_drvdata(&rpdev->dev);
+
+ dev_dbg(&rpdev->dev, "Removing rpmsg tty device %d\n", cport->id);
+
+ /* User hang up to release the tty */
+ if (tty_port_initialized(&cport->port))
+ tty_port_tty_hangup(&cport->port, false);
+
+ tty_unregister_device(rpmsg_tty_driver, cport->id);
+
+ tty_port_destroy(&cport->port);
+ rpmsg_tty_release_cport(cport);
+}
+
+static struct rpmsg_device_id rpmsg_driver_tty_id_table[] = {
+ { .name = "rpmsg-tty" },
+ { },
+};
+MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_tty_id_table);
+
+static struct rpmsg_driver rpmsg_tty_rpmsg_drv = {
+ .drv.name = KBUILD_MODNAME,
+ .id_table = rpmsg_driver_tty_id_table,
+ .probe = rpmsg_tty_probe,
+ .callback = rpmsg_tty_cb,
+ .remove = rpmsg_tty_remove,
+};
+
+static int __init rpmsg_tty_init(void)
+{
+ int err;
+
+ rpmsg_tty_driver = tty_alloc_driver(MAX_TTY_RPMSG, TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(rpmsg_tty_driver))
+ return PTR_ERR(rpmsg_tty_driver);
+
+ rpmsg_tty_driver->driver_name = "rpmsg_tty";
+ rpmsg_tty_driver->name = "ttyRPMSG";
+ rpmsg_tty_driver->major = 0;
+ rpmsg_tty_driver->type = TTY_DRIVER_TYPE_CONSOLE;
+
+ /* Disable unused mode by default */
+ rpmsg_tty_driver->init_termios = tty_std_termios;
+ rpmsg_tty_driver->init_termios.c_lflag &= ~(ECHO | ICANON);
+ rpmsg_tty_driver->init_termios.c_oflag &= ~(OPOST | ONLCR);
+
+ tty_set_operations(rpmsg_tty_driver, &rpmsg_tty_ops);
+
+ err = tty_register_driver(rpmsg_tty_driver);
+ if (err < 0) {
+ pr_err("Couldn't install rpmsg tty driver: err %d\n", err);
+ goto error_put;
+ }
+
+ err = register_rpmsg_driver(&rpmsg_tty_rpmsg_drv);
+ if (err < 0) {
+ pr_err("Couldn't register rpmsg tty driver: err %d\n", err);
+ goto error_unregister;
+ }
+
+ return 0;
+
+error_unregister:
+ tty_unregister_driver(rpmsg_tty_driver);
+
+error_put:
+ tty_driver_kref_put(rpmsg_tty_driver);
+
+ return err;
+}
+
+static void __exit rpmsg_tty_exit(void)
+{
+ unregister_rpmsg_driver(&rpmsg_tty_rpmsg_drv);
+ tty_unregister_driver(rpmsg_tty_driver);
+ tty_driver_kref_put(rpmsg_tty_driver);
+ idr_destroy(&tty_idr);
+}
+
+module_init(rpmsg_tty_init);
+module_exit(rpmsg_tty_exit);
+
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("remote processor messaging tty driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
