Use the generic PHY framework API to get the PHY. The usb_phy_set_resume
and usb_phy_set_suspend is replaced with power_on/get_sync and
power_off/put_sync to align with the new PHY framework.
musb->xceiv can't be removed as of now because musb core uses xceiv.state and
xceiv.otg. Once there is a separate state machine to handle otg, these can be
moved out of xceiv and then we can start using the generic PHY framework.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/usb/musb/musb_core.c | 1 +
drivers/usb/musb/musb_core.h | 3 +++
drivers/usb/musb/omap2430.c | 29 +++++++++++++++++++++--------
3 files changed, 25 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 37a261a..2162148 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1864,6 +1864,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->board_set_power = plat->set_power;
musb->min_power = plat->min_power;
musb->ops = plat->platform_ops;
+ musb->phy_dev_name = plat->phy_dev_name;
/* The musb_platform_init() call:
* - adjusts musb->mregs
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 7fb4819..09ac74c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -46,6 +46,7 @@
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/usb/musb.h>
+#include <linux/phy/phy.h>
struct musb;
struct musb_hw_ep;
@@ -357,6 +358,7 @@ struct musb {
u16 int_tx;
struct usb_phy *xceiv;
+ struct phy *phy;
int nIrq;
unsigned irq_wake:1;
@@ -434,6 +436,7 @@ struct musb {
unsigned double_buffer_not_ok:1;
struct musb_hdrc_config *config;
+ const char *phy_dev_name;
#ifdef MUSB_CONFIG_PROC_FS
struct proc_dir_entry *proc_entry;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 3551f1a..56ffe5f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -348,14 +348,24 @@ static int omap2430_musb_init(struct musb *musb)
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
*/
- if (dev->parent->of_node)
+ if (dev->parent->of_node) {
+ musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+ /* We can't totally remove musb->xceiv as of now because
+ * musb core uses xceiv.state and xceiv.otg. Once we have
+ * a separate state machine to handle otg, these can be moved
+ * out of xceiv and then we can start using the generic PHY
+ * framework
+ */
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
"usb-phy", 0);
- else
+ } else {
musb->xceiv = devm_usb_get_phy_dev(dev, 0);
+ musb->phy = devm_phy_get(dev, musb->phy_dev_name);
+ }
- if (IS_ERR(musb->xceiv)) {
- status = PTR_ERR(musb->xceiv);
+ if (IS_ERR(musb->xceiv) || IS_ERR(musb->phy)) {
+ status = PTR_ERR(musb->xceiv) | PTR_ERR(musb->phy);
if (status == -ENXIO)
return status;
@@ -397,9 +407,10 @@ static int omap2430_musb_init(struct musb *musb)
if (glue->status != OMAP_MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);
- usb_phy_init(musb->xceiv);
+ phy_init(musb->phy);
pm_runtime_put_noidle(musb->controller);
+ phy_pm_runtime_put(musb->phy);
return 0;
err1:
@@ -460,6 +471,7 @@ static int omap2430_musb_exit(struct musb *musb)
del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
+ phy_exit(musb->phy);
return 0;
}
@@ -618,7 +630,8 @@ static int omap2430_runtime_suspend(struct device *dev)
OTG_INTERFSEL);
omap2430_low_level_exit(musb);
- usb_phy_set_suspend(musb->xceiv, 1);
+ phy_power_off(musb->phy);
+ phy_pm_runtime_put(musb->phy);
}
return 0;
@@ -633,8 +646,8 @@ static int omap2430_runtime_resume(struct device *dev)
omap2430_low_level_init(musb);
musb_writel(musb->mregs, OTG_INTERFSEL,
musb->context.otg_interfsel);
-
- usb_phy_set_suspend(musb->xceiv, 0);
+ phy_pm_runtime_get_sync(musb->phy);
+ phy_power_on(musb->phy);
}
return 0;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
