Hi Alexandre,
Le 18/04/2013 17:38, Alexandre Belloni a écrit :
> + nau7802_i2c_write(st, NAU7802_REG_PUCTRL, data);
> + nau7802_i2c_write(st, NAU7802_REG_ADC_CTRL, 0x30);
> +
> + if (tmp >= 2400) {
> + data = NAU7802_CTRL1_VLDO((4500 - tmp) / 300);
> + nau7802_i2c_write(st, NAU7802_REG_CTRL1, data);
> + }
You should probably make a macro or inline function (with a comment) out
of that computation explaining why you are doing this.
> +
> + st->min_conversions = 6;
I'd prefer to see this as a define.
> +
> + /*
> + * The ADC fires continuously and we can't do anything about
> + * it. So we need to have the IRQ disabled by default, and we
> + * will enable them back when we will need them..
> + */
> + if (client->irq) {
> + irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
> + ret = request_threaded_irq(client->irq,
> + NULL,
> + nau7802_eoc_trigger,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + client->dev.driver->name,
> + idev);
> + if (ret) {
> + /*
> + * What may happen here is that our IRQ controller is
> + * not able to get level interrupt but this is required
> + * by this ADC as when going over 40 sample per second,
> + * the interrupt line may stay high between conversions.
> + * So, we continue no matter what but we switch to
> + * polling mode.
> + */
> + dev_info(&client->dev,
> + "Failed to allocate IRQ, using polling mode\n");
> + client->irq = 0;
> + /*
> + * We are polling, use the fastest sample rate by
> + * default
> + */
> + st->sample_rate = 0x7;
Ditto.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
