[PATCH v2 07/29] ABI: sysfs-class-cxl: place "not in a guest" at description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The What: field should have just the location of the ABI.
Anything else should be inside the description.

This fixes its parsing by get_abi.pl script.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 Documentation/ABI/testing/sysfs-class-cxl | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 818f55970efb..3c77677e0ca7 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -166,10 +166,11 @@ Description:    read only
                 Decimal value of the Per Process MMIO space length.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<afu>m/pp_mmio_off (not in a guest)
+What:           /sys/class/cxl/<afu>m/pp_mmio_off
 Date:           September 2014
 Contact:        linuxppc-dev@xxxxxxxxxxxxxxxx
 Description:    read only
+                (not in a guest)
                 Decimal value of the Per Process MMIO space offset.
 Users:		https://github.com/ibm-capi/libcxl
 
@@ -190,28 +191,31 @@ Description:    read only
                 Identifies the revision level of the PSL.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/base_image (not in a guest)
+What:           /sys/class/cxl/<card>/base_image
 Date:           September 2014
 Contact:        linuxppc-dev@xxxxxxxxxxxxxxxx
 Description:    read only
+                (not in a guest)
                 Identifies the revision level of the base image for devices
                 that support loadable PSLs. For FPGAs this field identifies
                 the image contained in the on-adapter flash which is loaded
                 during the initial program load.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/image_loaded (not in a guest)
+What:           /sys/class/cxl/<card>/image_loaded
 Date:           September 2014
 Contact:        linuxppc-dev@xxxxxxxxxxxxxxxx
 Description:    read only
+                (not in a guest)
                 Will return "user" or "factory" depending on the image loaded
                 onto the card.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/load_image_on_perst (not in a guest)
+What:           /sys/class/cxl/<card>/load_image_on_perst
 Date:           December 2014
 Contact:        linuxppc-dev@xxxxxxxxxxxxxxxx
 Description:    read/write
+                (not in a guest)
                 Valid entries are "none", "user", and "factory".
                 "none" means PERST will not cause image to be loaded to the
                 card.  A power cycle is required to load the image.
@@ -235,10 +239,11 @@ Description:    write only
                 contexts on the card AFUs.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:		/sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
+What:		/sys/class/cxl/<card>/perst_reloads_same_image
 Date:		July 2015
 Contact:	linuxppc-dev@xxxxxxxxxxxxxxxx
 Description:	read/write
+                (not in a guest)
 		Trust that when an image is reloaded via PERST, it will not
 		have changed.
 
-- 
2.31.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux