On Sat, Aug 28, 2021 at 08:54:41AM -0700, Guenter Roeck wrote: > On Sat, Aug 28, 2021 at 07:26:28AM +0200, Aleksa Savic wrote: > > This driver exposes hardware sensors of the Aquacomputer D5 Next > > watercooling pump, which communicates through a proprietary USB HID > > protocol. > > > > Available sensors are pump and fan speed, power, voltage and current, as > > well as coolant temperature. Also available through debugfs are the serial > > number, firmware version and power-on count. > > > > Attaching a fan is optional and allows it to be controlled using > > temperature curves directly from the pump. If it's not connected, > > the fan-related sensors will report zeroes. > > > > The pump can be configured either through software or via its physical > > interface. Configuring the pump through this driver is not implemented, > > as it seems to require sending it a complete configuration. That > > includes addressable RGB LEDs, for which there is no standard sysfs > > interface. Thus, that task is better suited for userspace tools. > > > > This driver has been tested on x86_64, both in-kernel and as a module. > > > > Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx> > > Applied. > > Thanks, > Guenter Thanks. Aleksa
