From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
With device core now able to setup the default pin configuration,
the pin configuration code based on the deprecated Samsung specific
gpio bindings is removed.
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
.../devicetree/bindings/spi/spi-samsung.txt | 8 +--
drivers/spi/spi-s3c64xx.c | 66 ++--------------------
2 files changed, 6 insertions(+), 68 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index a15ffed..86aa061 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -31,9 +31,6 @@ Required Board Specific Properties:
- #address-cells: should be 1.
- #size-cells: should be 0.
-- gpios: The gpio specifier for clock, mosi and miso interface lines (in the
- order specified). The format of the gpio specifier depends on the gpio
- controller.
Optional Board Specific Properties:
@@ -86,9 +83,8 @@ Example:
spi_0: spi@12d20000 {
#address-cells = <1>;
#size-cells = <0>;
- gpios = <&gpa2 4 2 3 0>,
- <&gpa2 6 2 3 0>,
- <&gpa2 7 2 3 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
w25q80bw@0 {
#address-cells = <1>;
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 4989aeb..4ab992b 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1148,41 +1148,6 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
}
#ifdef CONFIG_OF
-static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
-{
- struct device *dev = &sdd->pdev->dev;
- int idx, gpio, ret;
-
- /* find gpios for mosi, miso and clock lines */
- for (idx = 0; idx < 3; idx++) {
- gpio = of_get_gpio(dev->of_node, idx);
- if (!gpio_is_valid(gpio)) {
- dev_err(dev, "invalid gpio[%d]: %d\n", idx, gpio);
- goto free_gpio;
- }
- sdd->gpios[idx] = gpio;
- ret = gpio_request(gpio, "spi-bus");
- if (ret) {
- dev_err(dev, "gpio [%d] request failed: %d\n",
- gpio, ret);
- goto free_gpio;
- }
- }
- return 0;
-
-free_gpio:
- while (--idx >= 0)
- gpio_free(sdd->gpios[idx]);
- return -EINVAL;
-}
-
-static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
-{
- unsigned int idx;
- for (idx = 0; idx < 3; idx++)
- gpio_free(sdd->gpios[idx]);
-}
-
static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
{
struct s3c64xx_spi_info *sci;
@@ -1215,15 +1180,6 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
{
return dev->platform_data;
}
-
-static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
-{
- return -EINVAL;
-}
-
-static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
-{
-}
#endif
static const struct of_device_id s3c64xx_spi_dt_match[];
@@ -1344,10 +1300,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
goto err0;
}
- if (!sci->cfg_gpio && pdev->dev.of_node) {
- if (s3c64xx_spi_parse_dt_gpio(sdd))
- return -EBUSY;
- } else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) {
+ if (sci->cfg_gpio && sci->cfg_gpio()) {
dev_err(&pdev->dev, "Unable to config gpio\n");
ret = -EBUSY;
goto err0;
@@ -1358,13 +1311,13 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
if (IS_ERR(sdd->clk)) {
dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
ret = PTR_ERR(sdd->clk);
- goto err1;
+ goto err0;
}
if (clk_prepare_enable(sdd->clk)) {
dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
ret = -EBUSY;
- goto err1;
+ goto err0;
}
sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
@@ -1421,9 +1374,6 @@ err3:
clk_disable_unprepare(sdd->src_clk);
err2:
clk_disable_unprepare(sdd->clk);
-err1:
- if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
- s3c64xx_spi_dt_gpio_free(sdd);
err0:
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
@@ -1446,9 +1396,6 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
clk_disable_unprepare(sdd->clk);
- if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
- s3c64xx_spi_dt_gpio_free(sdd);
-
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
@@ -1467,9 +1414,6 @@ static int s3c64xx_spi_suspend(struct device *dev)
clk_disable_unprepare(sdd->src_clk);
clk_disable_unprepare(sdd->clk);
- if (!sdd->cntrlr_info->cfg_gpio && dev->of_node)
- s3c64xx_spi_dt_gpio_free(sdd);
-
sdd->cur_speed = 0; /* Output Clock is stopped */
return 0;
@@ -1481,9 +1425,7 @@ static int s3c64xx_spi_resume(struct device *dev)
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
- if (!sci->cfg_gpio && dev->of_node)
- s3c64xx_spi_parse_dt_gpio(sdd);
- else
+ if (sci->cfg_gpio)
sci->cfg_gpio();
/* Enable the clock */
--
1.8.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
