From: Tang Yuantian <yuantian.tang@xxxxxxxxxxxxx>
The following SoCs will be affected: p2041, p3041, p4080,
p5020, p5040
Signed-off-by: Tang Yuantian <Yuantian.Tang@xxxxxxxxxxxxx>
Signed-off-by: Li Yang <leoli@xxxxxxxxxxxxx>
---
* resend for review
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 62 ++++++++++++++++-
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 4 ++
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 62 ++++++++++++++++-
arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 4 ++
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 100 +++++++++++++++++++++++++++-
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 8 +++
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 42 +++++++++++-
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 2 +
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 54 ++++++++++++++-
arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi | 4 ++
10 files changed, 337 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 69ac1ac..d83de62 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -305,9 +305,69 @@
};
clockgen: global-utilities@e1000 {
- compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0",
+ "fixed-clock";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ clock-output-names = "sysclk";
+ #clock-cells = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux1";
+ };
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux2";
+ };
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux3";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index 7a2697d..22f3b14 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -81,6 +81,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
@@ -89,6 +90,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
@@ -97,6 +99,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
@@ -105,6 +108,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 9b5a81a..25b19cc 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -332,9 +332,69 @@
};
clockgen: global-utilities@e1000 {
- compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+ compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0",
+ "fixed-clock";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ clock-output-names = "sysclk";
+ #clock-cells = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pll0: pll1@800 {
+ #clock-cells = <1>;
+ reg = <0x800>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux1";
+ };
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux2";
+ };
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux3";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index c9ca2c3..468e8be 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -82,6 +82,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
@@ -90,6 +91,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
@@ -98,6 +100,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
@@ -106,6 +109,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 19859ad..3596f05 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -352,9 +352,107 @@
};
clockgen: global-utilities@e1000 {
- compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+ compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0",
+ "fixed-clock";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ clock-output-names = "sysclk";
+ #clock-cells = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+ pll2: pll2@840 {
+ #clock-cells = <1>;
+ reg = <0x840>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll2", "pll2-div2";
+ };
+ pll3: pll2@860 {
+ #clock-cells = <1>;
+ reg = <0x860>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll3", "pll3-div2";
+ };
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux1";
+ };
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux2";
+ };
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux3";
+ };
+ mux4: mux4@80 {
+ #clock-cells = <0>;
+ reg = <0x80>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1";
+ clock-output-names = "cmux4";
+ };
+ mux5: mux5@a0 {
+ #clock-cells = <0>;
+ reg = <0xa0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1";
+ clock-output-names = "cmux5";
+ };
+ mux6: mux6@c0 {
+ #clock-cells = <0>;
+ reg = <0xc0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1";
+ clock-output-names = "cmux6";
+ };
+ mux7: mux7@e0 {
+ #clock-cells = <0>;
+ reg = <0xe0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1";
+ clock-output-names = "cmux7";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 493d9a0..0040b5a 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -81,6 +81,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
@@ -89,6 +90,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
@@ -97,6 +99,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
@@ -105,6 +108,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
@@ -113,6 +117,7 @@
cpu4: PowerPC,e500mc@4 {
device_type = "cpu";
reg = <4>;
+ clocks = <&mux4>;
next-level-cache = <&L2_4>;
L2_4: l2-cache {
next-level-cache = <&cpc>;
@@ -121,6 +126,7 @@
cpu5: PowerPC,e500mc@5 {
device_type = "cpu";
reg = <5>;
+ clocks = <&mux5>;
next-level-cache = <&L2_5>;
L2_5: l2-cache {
next-level-cache = <&cpc>;
@@ -129,6 +135,7 @@
cpu6: PowerPC,e500mc@6 {
device_type = "cpu";
reg = <6>;
+ clocks = <&mux6>;
next-level-cache = <&L2_6>;
L2_6: l2-cache {
next-level-cache = <&cpc>;
@@ -137,6 +144,7 @@
cpu7: PowerPC,e500mc@7 {
device_type = "cpu";
reg = <7>;
+ clocks = <&mux7>;
next-level-cache = <&L2_7>;
L2_7: l2-cache {
next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 9ea77c3..3c662bd 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -337,9 +337,49 @@
};
clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0",
+ "fixed-clock";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ clock-output-names = "sysclk";
+ #clock-cells = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux1";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 8df47fc..fe1a2e6 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -88,6 +88,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
@@ -96,6 +97,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 97f8c26..3870b22 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -297,9 +297,61 @@
};
clockgen: global-utilities@e1000 {
- compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
+ compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0",
+ "fixed-clock";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ clock-output-names = "sysclk";
+ #clock-cells = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820>;
+ compatible = "fsl,core-pll-clock";
+ clocks = <&clockgen>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux1";
+ };
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux2";
+ };
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60>;
+ compatible = "fsl,core-mux-clock";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
+ clock-output-names = "cmux3";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index 40ca943..3674686 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -81,6 +81,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
@@ -89,6 +90,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
@@ -97,6 +99,7 @@
cpu2: PowerPC,e5500@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
@@ -105,6 +108,7 @@
cpu3: PowerPC,e5500@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
