On 7/26/21 10:18 AM, Emil Renner Berthing wrote:
This adds a driver for the temperature sensor on the JH7100, a RISC-V
SoC by StarFive Technology Co. Ltd., and most likely also the upcoming
JH7110 version.
The SoC is used on the BeagleV Starlight board:
https://github.com/beagleboard/beaglev-starlight
Support for this SoC is not yet upstreamed, but is actively worked on,
so it should only be a matter of time before that happens.
Hmm, makes me wonder if I should apply the series now or later,
when the chip is actually supported by the kernel. Comments/thoughts ?
Guenter
v3:
* Handle timeouts from wait_for_completion_interruptible_timeout
properly.
v2:
* Fix checkpatch.pl --strict warnings
- Add myself to MAINTAINERS
- Fix multiline comments
- Use proper case and whitespace for #defines
- Add comment to sfctemp::lock mutex.
* Remaining comments by Guenter Roeck
- Add Documentation/hwmon/sfctemp.rst
- Use devm_add_action() and devm_hwmon_device_register_with_info()
instead of a driver .remove function.
- Don't do test conversion at probe time.
- #include <linux/io.h>
- Remove unused #defines
- Use int return variable in sfctemp_convert().
* Add Samin's Signed-off-by to patch 2/2
Emil Renner Berthing (2):
dt-bindings: hwmon: add starfive,jh7100-temp bindings
hwmon: (sfctemp) Add StarFive JH7100 temperature sensor
.../bindings/hwmon/starfive,jh7100-temp.yaml | 43 +++
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/sfctemp.rst | 32 ++
MAINTAINERS | 8 +
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sfctemp.c | 291 ++++++++++++++++++
7 files changed, 386 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
create mode 100644 Documentation/hwmon/sfctemp.rst
create mode 100644 drivers/hwmon/sfctemp.c
