Testing information: da850-evm comes with partitions specified in DT blob. Able to mount/umount and create/delete files on filesystem partition. Applies on top of linux_davinci/master tree: git://gitorious.org/linux-davinci/linux-davinci.git Since v4: Separate out chip_select pinmuxing so as to allow boards choose accordingly. Since v3: Minor nit, fix tabs and commit message of 2/5. Since v2: Fix compatible property DT naming convention. Since v1: Look for m25p64 instead of m25p80 flash chip and correct partition information. Dropped below accepted patch: "spi/davinci: fix module build error" Considered below missed out patch: spi/davinci: add DT binding documentation Manjunathappa, Prakash (4): spi/davinci: no wildcards in DT compatible property ARM: davinci: da850: add SPI1 DT node ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850-evm: add SPI flash support Murali Karicheri (1): spi/davinci: add DT binding documentation .../devicetree/bindings/spi/spi-davinci.txt | 51 ++++++++++++++++++++ arch/arm/boot/dts/da850-evm.dts | 40 +++++++++++++++ arch/arm/boot/dts/da850.dtsi | 22 ++++++++ arch/arm/mach-davinci/da8xx-dt.c | 1 + drivers/spi/spi-davinci.c | 4 +- 5 files changed, 116 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/spi-davinci.txt -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html