Re: [PATCH] powerpc: remove PReP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 27, 2013 at 11:47 AM, Paul Bolle <pebolle@xxxxxxxxxx> wrote:
> 3) I removed two files in documentation that are almost entirely PReP
> specific. The remaining lines looked uninteresting.

> --- a/Documentation/powerpc/sound.txt
> +++ /dev/null

> -2. IBM CHRP
> -
> -  I have only tested this on the 43P-150.  Build the kernel with the cs4232
> -  set as a module and load the module with irq=9 dma=1 dma2=2 io=0x550

This section is CHRP-specific. The cs4232 driver also worked on the
CHRP LongTrail.
But I don't remember if the parameter values above also applied to LongTrail.
I do remember it didn't work without specifing the right parameters, so you
probably want to keep this section.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux