On Friday, March 15, 2013 8:01 AM, Doug Anderson wrote:
>
> The exynox4210-ehci and exynos4210-ohci nodes need a clock specified
> using the common clock framework. Document it.
>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/usb/exynos-usb.txt | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt
> b/Documentation/devicetree/bindings/usb/exynos-usb.txt
> index f66fcdd..d557cf7 100644
> --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
> @@ -10,6 +10,8 @@ Required properties:
> - reg: physical base address of the controller and length of memory mapped
> region.
> - interrupts: interrupt number to the cpu.
> + - clocks: from common clock binding: handle to adc clock.
^^^
Is it right? I think that 'adc' can be changed to 'usb host'.
Best regards,
Jingoo Han
> + - clock-names: from common clock binding: Shall be "usbhost".
>
> Optional properties:
> - samsung,vbus-gpio: if present, specifies the GPIO that
> @@ -22,6 +24,9 @@ Example:
> reg = <0x12110000 0x100>;
> interrupts = <0 71 0>;
> samsung,vbus-gpio = <&gpx2 6 1 3 3>;
> +
> + clocks = <&clock 285>;
> + clock-names = "usbhost";
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
