On Wed, Mar 6, 2013 at 6:15 PM, Matt Porter <mporter@xxxxxx> wrote:
> Adds support for parsing the TI EDMA DT data into the
> required EDMA private API platform data. Enables runtime
> PM support to initialize the EDMA hwmod. Adds AM33XX EDMA
> crossbar event mux support. Enables build on OMAP.
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> +static int edma_xbar_event_map(struct device *dev,
> + struct device_node *node,
> + struct edma_soc_info *pdata, int len)
> +{
> + int ret = 0;
> + int i;
> + struct resource res;
> + void *xbar;
> + const s16 (*xbar_chans)[2];
> + u32 shift, offset, mux;
> +
> + xbar_chans = devm_kzalloc(dev,
> + len/sizeof(s16) + 2*sizeof(s16),
> + GFP_KERNEL);
> + if (!xbar_chans)
> + return -ENOMEM;
> +
> + ret = of_address_to_resource(node, 1, &res);
> + if (ret)
> + return -EIO;
> +
> + xbar = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!xbar)
> + return -ENOMEM;
> +
> + ret = edma_of_read_u32_to_s16_array(node,
> + "ti,edma-xbar-event-map",
> + (s16 *)xbar_chans,
> + len/sizeof(u32));
> + if (ret)
> + return -EIO;
> +
> + for (i = 0; xbar_chans[i][0] != -1; i++) {
> + shift = (xbar_chans[i][1] % 4) * 8;
Looks like shift = (xbar_chans[i][1] & 0x03) << 3;
> + offset = xbar_chans[i][1] >> 2;
> + offset <<= 2;
Is it offset = xbar_chans[i][1] & 0xfffc; ?
> + mux = readl((void *)((u32)xbar + offset));
> + mux &= ~(0xff << shift);
> + mux |= xbar_chans[i][0] << shift;
> + writel(mux, (void *)((u32)xbar + offset));
> + }
--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
