On Tuesday 05 March 2013, Manjunathappa, Prakash wrote: > On Mon, Mar 04, 2013 at 21:59:16, Arnd Bergmann wrote: > > On Monday 04 March 2013 18:29:12 Manjunathappa, Prakash wrote: > > > +- reg: Offset and length of SPI controller register space > > > +- num-cs: Number of chip selects > > > +- ti,davinci-spi-intr-line: interrupt line used to connect the SPI > > > + IP to the interrupt controller withn the SoC. Possible values > > > + are 0 and 1. Manual says one of the two possible interrupt > > > + lines can be tied to the interrupt controller. Set this > > > + based on a specifc SoC configuration. > > > +- interrupts: interrupt number offset at the irq parent > > > > I would not call this an "offset". It is an interrupt descriptor > > which may be something other than a simple number. > > > > I am planning to drop from this documentation as it is common property. I think it makese sense to document the fact that there should be exactly one interrupt listed in the interrupts property, especially since the hardware has two outputs. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
