On 02/20/2013 06:49 AM, J, KEERTHY wrote: > Mark Brown wrote at Wednesday, February 20, 2013 4:57 PM: >> On Wed, Feb 20, 2013 at 09:30:15AM +0530, J Keerthy wrote: >>> From: Graeme Gregory <gg@xxxxxxxxxxxxxxx> >>> >>> Add the DTS definition for the palmas device including the MFD children. ... >>> diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt ... >>> +Texas Instruments Palmas family >>> + >>> +The Palmas familly are Integrated Power Management Chips. >>> +These chips are connected to an i2c bus. >> >> I would expect this to enumerate the regulators that the user can >> select but it doesn't appear to do that. > > Mark, > > Thanks for reviewing the patch. > > I went through the DT Documentation files in the regulator/ folder. > So shall I add a list of regulators which are in the Palmas device > Under a separate file under Documentation/devicetree/bindings/regulator ? > Is that what you are looking for? I believe what Mark wants is something like the following in this file (take from Documentation/devicetree/bindings/regulator/tps6586x.txt): > - regulators: A node that houses a sub-node for each regulator within the > device. Each sub-node is identified using the node's name (or the deprecated > regulator-compatible property if present), with valid values listed below. > The content of each sub-node is defined by the standard binding for > regulators; see regulator.txt. > sys, sm[0-2], ldo[0-9] and ldo_rtc -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
