Hi Matt,
This version introduces build/bisect issues.
On 2/1/2013 11:52 PM, Matt Porter wrote:
> Move mach-davinci/dma.c to common/edma.c so it can be used
> by OMAP (specifically AM33xx) as well.
>
> Signed-off-by: Matt Porter <mporter@xxxxxx>
> Acked-by: Sekhar Nori <nsekhar@xxxxxx>
> diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/common/edma.c
> @@ -25,7 +25,7 @@
> #include <linux/io.h>
> #include <linux/slab.h>
>
> -#include <mach/edma.h>
> +#include <linux/platform_data/edma.h>
> /*-----------------------------------------------------------------------*/
> +static int edma_of_read_u32_to_s8_array(const struct device_node *np,
> + const char *propname, s8 *out_values,
> + size_t sz)
> +{
> + int ret;
> +
> + ret = of_property_read_u8_array(np, propname, out_values, sz);
This needs <linux/of.h> to be included in this file.
> +static int edma_xbar_event_map(struct device *dev,
> + struct device_node *node,
> + struct edma_soc_info *pdata, int len)
> +{
> + int ret = 0;
> + int i;
> + struct resource res;
> + void *xbar;
> + const s16 (*xbar_chans)[2];
> + u32 shift, offset, mux;
> +
> + xbar_chans = devm_kzalloc(dev,
> + len/sizeof(s16) + 2*sizeof(s16),
> + GFP_KERNEL);
> + if (!xbar_chans)
> + return -ENOMEM;
> +
> + ret = of_address_to_resource(node, 1, &res);
of_address_to_resource() needs <linux/of_address.h>
> + if (IS_ERR_VALUE(ret))
This needs <linux/err.h>
> + return -EIO;
> +
> + xbar = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!xbar)
> + return -ENOMEM;
> +
> + ret = edma_of_read_u32_to_s16_array(node,
> + "ti,edma-xbar-event-map",
> + (s16 *)xbar_chans,
> + len/sizeof(u32));
> + if (IS_ERR_VALUE(ret))
> + return -EIO;
> +
> + for (i = 0; xbar_chans[i][0] != -1; i++) {
> + shift = (xbar_chans[i][1] % 4) * 8;
> + offset = xbar_chans[i][1] >> 2;
> + offset <<= 2;
> + mux = readl((void *)((u32)xbar + offset));
> + mux &= ~(0xff << shift);
> + mux |= xbar_chans[i][0] << shift;
> + writel(mux, (void *)((u32)xbar + offset));
> + }
> +
> + pdata->xbar_chans = xbar_chans;
There is no member xbar_chans ATM. It seems to be introduced in 03/10.
> +
> +static struct of_dma_filter_info edma_filter_info = {
of_dma_filter_info needs <linux/of_dma.h>.
> + .filter_fn = edma_filter_fn,
edma_filter_fn needs <linux/edma.h>
BTW, I am not sure if you really intended to introduce EDMA DT support
in this patch. I thought 1/10 was supposed to just move EDMA private API
to a common place. If you really want to introduce DT support as well,
that should be noted in the description. I think it is better done in a
later patch.
> diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c
> @@ -17,6 +17,7 @@
> #include <linux/timer.h>
> #include <linux/interrupt.h>
> #include <linux/platform_device.h>
> +#include <linux/platform_data/edma.h>
> #include <linux/gpio.h>
> #include <sound/core.h>
> #include <sound/pcm.h>
> @@ -28,12 +29,14 @@
> #include <asm/plat-sffsdr/sffsdr-fpga.h>
> #endif
>
> -#include <mach/edma.h>
>
> #include "../codecs/pcm3008.h"
> #include "davinci-pcm.h"
> #include "davinci-i2s.h"
>
> +#define DAVINCI_DMA_MCBSP_TX 2
> +#define DAVINCI_DMA_MCBSP_RX 3
> +
> /*
> * CLKX and CLKR are the inputs for the Sample Rate Generator.
> * FSX and FSR are outputs, driven by the sample Rate Generator.
> @@ -124,7 +127,7 @@ static struct resource sffsdr_snd_resources[] = {
>
> static struct evm_snd_platform_data sffsdr_snd_data = {
> .tx_dma_ch = DAVINCI_DMA_MCBSP_TX,
> - .rx_dma_ch = DAVINCI_DMA_MCBSP_RX,
> + .rx_dma_ch = DAVINCI_DMA_MCBAP_RX,
Typo here. Should be DAVINCI_DMA_MCBSP_RX. Unfortunately
davinci-sffsdr.c seems to be broken already.
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
