Hi Prabhakar,
On 01/29/2013 02:07 PM, Prabhakar Lad wrote:
[...]
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
new file mode 100644
index 0000000..55d3ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
@@ -0,0 +1,38 @@
+* Texas Instruments TVP514x video decoder
+
+The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
+digital video decoder that digitizes and decodes all popular baseband analog
+video formats into digital video component. The tvp514x decoder supports analog-
+to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
+conversion and decoding of NTSC, PAL and SECAM composite and S-video into
+component YCbCr.
+
+Required Properties :
+- compatible: Must be "ti,tvp514x-decoder"
There are no significant differences among TVP514* devices as listed above,
you would like to handle above ?
I'm just wondering if you don't need ,for instance, two separate compatible
properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" ?
+- hsync-active: HSYNC Polarity configuration for current interface.
+- vsync-active: VSYNC Polarity configuration for current interface.
+- data-active: Clock polarity of the current interface.
I guess you mean "pclk-sample: Clock polarity..." ?
+
+Example:
+
+i2c0@1c22000 {
+ ...
+ ...
+
+ tvp514x@5c {
+ compatible = "ti,tvp514x-decoder";
+ reg =<0x5c>;
+
+ port {
+ tvp514x_1: endpoint {
+ /* Active high (Defaults to 0) */
+ hsync-active =<1>;
+ /* Active high (Defaults to 0) */
+ hsync-active =<1>;
Should it be vsync-active ?
+ /* Active low (Defaults to 0) */
+ data-active =<0>;
and this pclk-sample ?
+ };
+ };
+ };
+ ...
+};
diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
index a4f0a70..24ce759 100644
--- a/drivers/media/i2c/tvp514x.c
+++ b/drivers/media/i2c/tvp514x.c
@@ -12,6 +12,7 @@
* Hardik Shah<hardik.shah@xxxxxx>
* Manjunath Hadli<mrh@xxxxxx>
* Karicheri Muralidharan<m-karicheri2@xxxxxx>
+ * Prabhakar Lad<prabhakar.lad@xxxxxx>
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -33,7 +34,9 @@
#include<linux/delay.h>
#include<linux/videodev2.h>
#include<linux/module.h>
+#include<linux/of_device.h>
+#include<media/v4l2-of.h>
#include<media/v4l2-async.h>
#include<media/v4l2-device.h>
#include<media/v4l2-common.h>
@@ -930,6 +933,58 @@ static struct tvp514x_decoder tvp514x_dev = {
};
+#if defined(CONFIG_OF)
+static const struct of_device_id tvp514x_of_match[] = {
+ {.compatible = "ti,tvp514x-decoder", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, tvp514x_of_match);
+
+static struct tvp514x_platform_data
+ *tvp514x_get_pdata(struct i2c_client *client)
+{
+ if (!client->dev.platform_data&& client->dev.of_node) {
+ struct tvp514x_platform_data *pdata;
+ struct v4l2_of_endpoint bus_cfg;
+ struct device_node *endpoint;
+
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct tvp514x_platform_data),
+ GFP_KERNEL);
+ client->dev.platform_data = pdata;
Do you really need to set client->dev.platform_data this way ?
What about passing struct tvp514x_decoder pointer to this function
and initializing struct tvp514x_decoder::pdata instead ?
+ if (!pdata)
+ return NULL;
+
+ endpoint = of_get_child_by_name(client->dev.of_node, "port");
+ if (endpoint)
+ endpoint = of_get_child_by_name(endpoint, "endpoint");
I think you could replace these two calls above with
endpoint = v4l2_of_get_next_endpoint(client->dev.of_node);
Now I see I should have modified this function to ensure it works also when
'port' nodes are grouped in a 'ports' node.
+ if (!endpoint) {
+ v4l2_info(client, "Using default data!!\n");
+ } else {
+ v4l2_of_parse_parallel_bus(endpoint,&bus_cfg);
+
+ if (bus_cfg.mbus_flags& V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ pdata->hs_polarity = 1;
+ if (bus_cfg.mbus_flags& V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ pdata->vs_polarity = 1;
+ if (bus_cfg.mbus_flags& V4L2_MBUS_PCLK_SAMPLE_RISING)
+ pdata->clk_polarity = 1;
+ }
+ }
+
+ return client->dev.platform_data;
+}
+#else
+#define tvp514x_of_match NULL
+
+static struct tvp514x_platform_data
+ *tvp514x_get_pdata(struct i2c_client *client)
+{
+ return client->dev.platform_data;
+}
+#endif
+
/**
* tvp514x_probe() - decoder driver i2c probe handler
* @client: i2c driver client device structure
@@ -941,6 +996,7 @@ static struct tvp514x_decoder tvp514x_dev = {
static int
tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
+ struct tvp514x_platform_data *pdata;
struct tvp514x_decoder *decoder;
struct v4l2_subdev *sd;
int ret;
@@ -949,22 +1005,25 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
+ pdata = tvp514x_get_pdata(client);
+ if (!pdata) {
+ v4l2_err(client, "No platform data!!\n");
+ return -EPROBE_DEFER;
+ }
+
decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
if (!decoder)
return -ENOMEM;
/* Initialize the tvp514x_decoder with default configuration */
*decoder = tvp514x_dev;
- if (!client->dev.platform_data) {
- v4l2_err(client, "No platform data!!\n");
- return -EPROBE_DEFER;
- }
+
/* Copy default register configuration */
memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
sizeof(tvp514x_reg_list_default));
/* Copy board specific information here */
- decoder->pdata = client->dev.platform_data;
+ decoder->pdata = pdata;
/**
* Fetch platform specific data, and configure the
@@ -1096,6 +1155,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id);
static struct i2c_driver tvp514x_driver = {
.driver = {
+ .of_match_table = tvp514x_of_match,
.owner = THIS_MODULE,
.name = TVP514X_MODULE_NAME,
},
--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
