Re: [PATCH v3] PCI: Document PCIE BUS MPS parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 28, 2013 at 11:09 PM, Yijing Wang <wangyijing@xxxxxxxxxx> wrote:
> On 2013/1/29 13:00, Jon Mason wrote:
>> On Fri, Jan 25, 2013 at 2:36 AM, Yijing Wang <wangyijing@xxxxxxxxxx> wrote:
>>> v0->v1: Update MPS parameters as non-arch and add MRRS
>>>                 description into pcie_bus_perf parameter suggested
>>>                 by Andrew Murray.
>>> v1->v2: Update some semantic problems and add MPS and MRRS
>>>                 explanation suggested by Joe Lawrence and Randy Dunlap.
>>> v2->v3: Update some semantic problems and the description
>>>                 of pcie_bus_safe and pcie_bus_peer2peer suggested
>>>                 by Bjorn Helgaas.
>>>
>>> Document PCIE BUS MPS parameters pcie_bus_tune_off, pcie_bus_safe,
>>> pcie_bus_peer2peer, pcie_bus_perf into Documentation/kernel-parameters.txt.
>>> These parameters were introduced by Jon Mason <mason@xxxxxxxx> at
>>> commit 5f39e6705 and commit b03e7495a8.
>>>
>>> Signed-off-by: Yijing Wang <wangyijing@xxxxxxxxxx>
>>> ---
>>>  Documentation/kernel-parameters.txt |   13 +++++++++++++
>>>  1 files changed, 13 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
>>> index 363e348..2997df2 100644
>>> --- a/Documentation/kernel-parameters.txt
>>> +++ b/Documentation/kernel-parameters.txt
>>> @@ -2227,6 +2227,19 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>>>                                 This sorting is done to get a device
>>>                                 order compatible with older (<= 2.4) kernels.
>>>                 nobfsort        Don't sort PCI devices into breadth-first order.
>>> +               pcie_bus_tune_off       Disable PCIe MPS (Max Payload Size)
>>> +                               tuning and use the BIOS-configured MPS defaults.
>>> +               pcie_bus_safe   Use the smallest supported MPS of any device
>>> +                               below a root complex.
>>
>> This isn't correct.  It should be something like "The largest MPS
>> common to all devices below the root complex".
>
> Hi Jon,
>    Thanks for your review and comment!
> What about "Set every device's MPS to the largest MPSS (Max Payload Size Support)
> common to all devices below the root complex" ?

Sounds great!  Thanks so much for documenting this.

>
>>
>>> +               pcie_bus_perf   Configure device MPS to the largest
>>> +                               allowable MPS based on its parent bus. Also set
>>> +                               MRRS (Max Read Request Size) to the largest supported
>>> +                               value (no larger than the MPS that the device or bus
>>> +                               can support) for best performance.
>>> +               pcie_bus_peer2peer      Set every device's MPS to 128B, which
>>> +                               every device is guaranteed to support. This
>>> +                               configuration allows peer-to-peer DMA between any pair
>>> +                               of devices possibly at the cost of reduced performance.
>>>                 cbiosize=nn[KMG]        The fixed amount of bus space which is
>>>                                 reserved for the CardBus bridge's IO window.
>>>                                 The default value is 256 bytes.
>>> --
>>> 1.7.1
>>>
>>>
>>
>> .
>>
>
>
> --
> Thanks!
> Yijing
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux