On 1/24/2013 5:05 PM, Vishwanathrao Badarkhe, Manish wrote: > Add I2C0 device tree node information to da850-evm. > Also, add I2C0 pin muxing information in da850-evm. > > Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@xxxxxx> > --- > Depends on patch > http://comments.gmane.org/gmane.linux.davinci/25993 > > arch/arm/boot/dts/da850-evm.dts | 15 +++++++++++++++ > arch/arm/boot/dts/da850.dtsi | 10 ++++++++++ > 2 files changed, 25 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts > index 8cac9d2..3d8290a 100755 > --- a/arch/arm/boot/dts/da850-evm.dts > +++ b/arch/arm/boot/dts/da850-evm.dts > @@ -27,5 +27,20 @@ > serial2: serial@1d0d000 { > status = "okay"; > }; > + i2c0@1c22000 { This should be i2c0: i2c@1c22000 to follow the convention elsewhere in file. > + status = "okay"; > + }; > + }; > +}; > +&pmx_core { > + pinctrl-names = "default"; > + pinctrl-0 = < > + &i2c0_pins > + >; > + > + i2c0_pins: pinmux_i2c0_pins{ > + pinctrl-single,bits = < > + 0x10 0x00002200 0x0000ff00 /* I2C0_SDA,I2C0_SCL */ > + >; This should go into the dtsi file. See the discussion on NAND DT support submitted by Anil Kumar. Thanks, Sekhar PS: You are using an old address for Kevin Hilman. The MAINTAINERS file has been updated for a long time now. Liam's address is also wrong but I don't have his updated e-mail. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
