Re: [PATCH V2 1/2] pinctrl: tegra: add support for rcv-sel and drive type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Linus W,


On Tuesday 08 January 2013 01:02 PM, Laxman Dewangan wrote:
From: Pritesh Raithatha <praithatha@xxxxxxxxxx>

NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
rcv-sel and drive type.

rcv-sel: Select between High and Normal VIL/VIH receivers.
	RCVR_SEL=1: High VIL/VIH
	RCVR_SEL=0: Normal VIL/VIH

drv_type: Ouptput drive type:
	33-50 ohm driver: 0x1
	66-100ohm driver: 0x0

Add support of these parameters to be configure from DTS file.

Tegra20 and Tegra30 does not support this configuration and hence initialize their
pinmux structure with reg = -1.

Originally written by Pritesh Raithatha.
Changes by ldewangan:
	- remove drvtype_width as it is always 2.
	- Better describe the change.

Signed-off-by: Pritesh Raithatha <praithatha@xxxxxxxxxx>
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Reviewed-by: Stephen Warren <swarren@xxxxxxxxxx>
---

Can you please review the series and let us know if any thing I can do for closing this?

Thanks,
Laxman



--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux