On Sun, Oct 28, 2012 at 05:01:29PM +0530, Sekhar Nori wrote:
> On 10/18/2012 6:56 PM, Matt Porter wrote:
> > Adds AM33XX SPI support for am335x-bone and am335x-evm.
> >
> > Signed-off-by: Matt Porter <mporter@xxxxxx>
> > ---
> > arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++
> > arch/arm/boot/dts/am335x-evm.dts | 9 ++++++++
> > arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 69 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> > index 5510979..23edfd8 100644
> > --- a/arch/arm/boot/dts/am335x-bone.dts
> > +++ b/arch/arm/boot/dts/am335x-bone.dts
> > @@ -18,6 +18,17 @@
> > reg = <0x80000000 0x10000000>; /* 256 MB */
> > };
> >
> > + am3358_pinmux: pinmux@44e10800 {
> > + spi1_pins: pinmux_spi1_pins {
> > + pinctrl-single,pins = <
> > + 0x190 0x13 /* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */
> > + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
> > + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
> > + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
> > + >;
>
> Is there a single pinmux setting that provides SPI functionality on the
> bone headers? Or this is specific to a cape you tested with?
No, there are two usable settings for spi1 and one setting for spi0.
I'm dropping this from the series since it's specific to how I wired up
the homebrew cape I use for spi testing on the Bone. I publish the
branch where all these extra "test-specific" patches (that aren't intended
to be merged) are at in the cover letter. Anybody that needs context of
how/what worked and was tested can grab them there.
-Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
