Re: [PATCH 1/2] ARM: sunxi: gpio: Add Allwinner SoCs GPIO drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 4, 2013 at 5:45 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:

> The IP responsible for the muxing on the Allwinner SoCs are also
> handling the GPIOs on the system. This patch adds the needed driver that
> relies on the pinctrl driver for most of its operations.
>
> The number of pins available for GPIOs operations are already declared
> in the pinctrl driver, we only need to probe a generic driver to handle
> the banks available for each SoC.
>
> This driver has been tested on a A13-Olinuxino.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>

Looking mostly good!

> +static int __devinit
> +sunxi_pinctrl_register_gpio_ranges(struct sunxi_pinctrl *pctl)
> +{
> +       int id = 0, base = 0, npins = 1, i, prev_pin = -1;
> +       struct pinctrl_gpio_range *range;
> +
> +       for (i = 0; i < pctl->desc->npins; i++) {
> +               const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
> +               unsigned pin_num = pin->pin.number;
> +
> +               if (prev_pin < 0) {
> +                       prev_pin = pin_num;
> +                       base = pin_num;
> +               } else if (prev_pin + 1 != pin_num) {
> +                       range = devm_kzalloc(pctl->dev,
> +                                       sizeof(*range),
> +                                       GFP_KERNEL);
> +                       if (!range)
> +                               return -ENOMEM;
> +
> +                       range->name = "sunxi";
> +                       range->id = id;
> +                       range->base = base;
> +                       range->pin_base = base;
> +                       range->npins = npins;
> +
> +                       pinctrl_add_gpio_range(pctl->pctl_dev, range);
> +
> +                       id++;
> +                       npins = 1;
> +                       prev_pin = pin_num;
> +                       base = prev_pin;
> +               } else {
> +                       prev_pin++;
> +                       npins++;
> +               }
> +       }
> +
> +       range = devm_kzalloc(pctl->dev, sizeof(*range),
> +                       GFP_KERNEL);
> +       if (!range)
> +               return -ENOMEM;
> +
> +       range->name = "sunxi";
> +       range->id = id;
> +       range->base = base;
> +       range->pin_base = base;
> +       range->npins = npins;
> +
> +       pinctrl_add_gpio_range(pctl->pctl_dev, range);
> +
> +       return 0;
> +}

Really hairy way to add ranges right?

Registering ranges from the pinctrl side is deprecated and discouraged.

Instead register the ranges from the GPIO driver.

Use gpiochip_add_pin_range() from the GPIO driver.

An example is provided in
drivers/pinctrl/pinctrl-coh901.c

After you have done this, you can probably get rid of this as well:

+static int __init sunxi_gpio_init(void)
+{
+       return platform_driver_register(&sunxi_gpio_driver);
+}
+postcore_initcall(sunxi_gpio_init);

This will become a simple module_init() if you are handling
deferred probe correctly.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux