Re: [PATCH 1/3] Input: imx_keypad - Add device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Dmitry,

Thanks for reviewing this patch.

2012/12/31 Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>:
> Hi Liu,
>
> On Sun, Dec 30, 2012 at 09:09:04PM +0800, Liu Ying wrote:
>> This patch adds device tree support for imx keypad driver.
>> 1) Basic device tree binding support.
>> 2) Since the probe function needs keymap and keymap size
>>    information, we get them from device tree if it is
>>    supported, otherwise, we fall back to legacy platform data.
>> 3) Support to configure keypad pins via pinctrl system.
>>
>> Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/input/imx-keypad.txt       |   54 +++++++++++++
>>  drivers/input/keyboard/imx_keypad.c                |   80 ++++++++++++++++++--
>>  2 files changed, 127 insertions(+), 7 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/input/imx-keypad.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/imx-keypad.txt b/Documentation/devicetree/bindings/input/imx-keypad.txt
>> new file mode 100644
>> index 0000000..1c6e16d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/imx-keypad.txt
>> @@ -0,0 +1,54 @@
>> +* Freescale i.MX Keypad Port(KPP) device tree bindings
>> +
>> +The KPP is designed to interface with a keypad matrix with 2-point contact
>> +or 3-point contact keys. The KPP is designed to simplify the software task
>> +of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
>> +and decoding one or multiple keys pressed simultaneously on a keypad.
>> +
>> +Required SoC Specific Properties:
>> +- compatible: Should be "fsl,imx-kpp".
>> +
>> +- reg: Physical base address of the KPP and length of memory mapped
>> +  region.
>> +
>> +- interrupts: The KPP interrupt number to the CPU(s).
>> +
>> +- clocks: The clock provided by the SoC to the KPP. Some SoCs use ipg clock,
>> +others use dummy clock(The clock for the KPP is provided by the SoCs
>> +automatically).
>> +
>> +Required Board Specific Properties:
>> +- pinctrl-names: The definition can be found at
>> +pinctrl/pinctrl-bindings.txt.
>> +
>> +- pinctrl-0: The definition can be found at
>> +pinctrl/pinctrl-bindings.txt.
>> +
>> +- linux,keymap: The definition can be found at
>> +bindings/input/matrix-keymap.txt.
>> +
>> +Example:
>> +kpp: kpp@73f94000 {
>> +     compatible = "fsl,imx-kpp";
>> +     reg = <0x73f94000 0x4000>;
>> +     interrupts = <60>;
>> +     clocks = <&clks 0>;
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&pinctrl_kpp_1>;
>> +     linux,keymap = <0x00000067      /* KEY_UP */
>> +                     0x0001006c      /* KEY_DOWN */
>> +                     0x00020072      /* KEY_VOLUMEDOWN */
>> +                     0x00030066      /* KEY_HOME */
>> +                     0x0100006a      /* KEY_RIGHT */
>> +                     0x01010069      /* KEY_LEFT */
>> +                     0x0102001c      /* KEY_ENTER */
>> +                     0x01030073      /* KEY_VOLUMEUP */
>> +                     0x02000040      /* KEY_F6 */
>> +                     0x02010042      /* KEY_F8 */
>> +                     0x02020043      /* KEY_F9 */
>> +                     0x02030044      /* KEY_F10 */
>> +                     0x0300003b      /* KEY_F1 */
>> +                     0x0301003c      /* KEY_F2 */
>> +                     0x0302003d      /* KEY_F3 */
>> +                     0x03030074>;    /* KEY_POWER */
>> +};
>> diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
>> index 6d150e3..e4f5c6a 100644
>> --- a/drivers/input/keyboard/imx_keypad.c
>> +++ b/drivers/input/keyboard/imx_keypad.c
>> @@ -20,6 +20,8 @@
>>  #include <linux/jiffies.h>
>>  #include <linux/kernel.h>
>>  #include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/pinctrl/consumer.h>
>>  #include <linux/platform_device.h>
>>  #include <linux/slab.h>
>>  #include <linux/timer.h>
>> @@ -414,17 +416,76 @@ open_err:
>>       return -EIO;
>>  }
>>
>> +static struct of_device_id imx_keypad_of_match[] = {
>> +     { .compatible = "fsl,imx-kpp", },
>> +     { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
>> +
>> +#ifdef CONFIG_OF
>> +static int imx_keypad_parse_dt(struct platform_device *pdev,
>> +                            uint32_t *keymap, int *keymap_size)
>> +{
>> +     struct device_node *np = pdev->dev.of_node;
>> +     struct device *dev = &pdev->dev;
>> +     unsigned int proplen, i;
>> +     const __be32 *prop;
>> +
>> +     if (!np)
>> +             return -ENODEV;
>> +
>> +     prop = of_get_property(np, "linux,keymap", &proplen);
>> +     if (!prop) {
>> +             dev_err(dev, "OF: linux,keymap property not defined in %s\n",
>> +                             np->full_name);
>> +             return -ENOENT;
>> +     }
>> +
>> +     if (proplen % sizeof(u32)) {
>> +             dev_err(dev, "OF: Malformed keycode property in %s\n",
>> +                             np->full_name);
>> +             return -EINVAL;
>> +     }
>> +
>> +     *keymap_size = proplen / sizeof(u32);
>> +     if (*keymap_size > MAX_MATRIX_KEY_NUM) {
>> +             dev_err(dev, "OF: linux,keymap size overflow\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     for (i = 0; i < *keymap_size; i++)
>> +             keymap[i] = be32_to_cpup(prop + i);
>
> All of this is implemented in matrix_keypad_build_keymap(), there is no
> need to do it again here.
The probe function of this driver needs the keymap information to set
keypad->rows_en_mask and keypad->cols_en_mask so that they can be used
later. I plan to change to parse the array keypad->keycodes[], which
is set by matrix_keypad_build_keymap(),  to get the row/col mask. Do
you think this is acceptable?
>> +
>> +     return 0;
>> +}
>> +#else
>> +static inline int imx_keypad_parse_dt(struct platform_device *pdev,
>> +                                   uint32_t *keymap, int *keymap_size)
>> +{
>> +     return -ENODEV;
>> +}
>> +#endif
>> +
>>  static int imx_keypad_probe(struct platform_device *pdev)
>>  {
>>       const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
>>       struct imx_keypad *keypad;
>>       struct input_dev *input_dev;
>>       struct resource *res;
>> -     int irq, error, i;
>> +     int irq, error, i, keymap_size = 0;
>> +     uint32_t keymap[MAX_MATRIX_KEY_NUM];
>> +     struct pinctrl *pinctrl;
>>
>> -     if (keymap_data == NULL) {
>> -             dev_err(&pdev->dev, "no keymap defined\n");
>> -             return -EINVAL;
>> +     error = imx_keypad_parse_dt(pdev, keymap, &keymap_size);
>> +     if (error) {
>> +             if (keymap_data) {
>> +                     keymap_size = keymap_data->keymap_size;
>> +                     memcpy(keymap, keymap_data->keymap,
>> +                                     keymap_size * sizeof(keymap[0]));
>
> I believe kernel-provided platform data should take precedence over
> DT-supplied data.
Ok. I will improve the logic here.
>
>> +             } else {
>> +                     dev_err(&pdev->dev, "no keymap defined\n");
>> +                     return -EINVAL;
>> +             }
>>       }
>>
>>       irq = platform_get_irq(pdev, 0);
>> @@ -473,6 +534,10 @@ static int imx_keypad_probe(struct platform_device *pdev)
>>               goto failed_free_priv;
>>       }
>>
>> +     pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
>> +     if (IS_ERR(pinctrl))
>> +             dev_warn(&pdev->dev, "failed to get default pinctrl\n");
>> +
>
> No, please let core do this for you. Linus has a patch doing just that.
Ok, I will remove this.
>
>>       keypad->clk = clk_get(&pdev->dev, NULL);
>>       if (IS_ERR(keypad->clk)) {
>>               dev_err(&pdev->dev, "failed to get keypad clock\n");
>> @@ -481,9 +546,9 @@ static int imx_keypad_probe(struct platform_device *pdev)
>>       }
>>
>>       /* Search for rows and cols enabled */
>> -     for (i = 0; i < keymap_data->keymap_size; i++) {
>> -             keypad->rows_en_mask |= 1 << KEY_ROW(keymap_data->keymap[i]);
>> -             keypad->cols_en_mask |= 1 << KEY_COL(keymap_data->keymap[i]);
>> +     for (i = 0; i < keymap_size; i++) {
>> +             keypad->rows_en_mask |= 1 << KEY_ROW(keymap[i]);
>> +             keypad->cols_en_mask |= 1 << KEY_COL(keymap[i]);
>>       }
>>
>>       if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
>> @@ -631,6 +696,7 @@ static struct platform_driver imx_keypad_driver = {
>>               .name   = "imx-keypad",
>>               .owner  = THIS_MODULE,
>>               .pm     = &imx_kbd_pm_ops,
>> +             .of_match_table = of_match_ptr(imx_keypad_of_match),
>>       },
>>       .probe          = imx_keypad_probe,
>>       .remove         = imx_keypad_remove,
>> --
>> 1.7.1
>>
>>
>
> Thanks.
>
> --
> Dmitry



-- 
Liu Ying
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux