The tps65090 mfd driver implement the suspend/resume callbacks
which just disable and enable irqs in suspend/resume respectively.
This operation is already done in irq suspend and irq_resume and
hence it is not require to implement the same in the driver.
Remove this non-require code.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
This change is based on Mark Brown's comment when reviewing tps80031 mfd driver
as we do not need suspend/resume just for disabling/enabling interrupts.
drivers/mfd/tps65090.c | 23 -----------------------
1 files changed, 0 insertions(+), 23 deletions(-)
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 3e987be..995e7b3 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -262,28 +262,6 @@ static int tps65090_i2c_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int tps65090_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- if (client->irq)
- disable_irq(client->irq);
- return 0;
-}
-
-static int tps65090_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- if (client->irq)
- enable_irq(client->irq);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops tps65090_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(tps65090_suspend, tps65090_resume)
-};
-
static const struct i2c_device_id tps65090_id_table[] = {
{ "tps65090", 0 },
{ },
@@ -295,7 +273,6 @@ static struct i2c_driver tps65090_driver = {
.name = "tps65090",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(tps65090_of_match),
- .pm = &tps65090_pm_ops,
},
.probe = tps65090_i2c_probe,
.remove = tps65090_i2c_remove,
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
