Re: [PATCH v2 0/5] Add movablecore_map boot option

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 27, 2012 at 8:49 PM, Tang Chen <tangchen@xxxxxxxxxxxxxx> wrote:
> On 11/27/2012 08:09 PM, Bob Liu wrote:
>>
>> On Tue, Nov 27, 2012 at 4:29 PM, Tang Chen<tangchen@xxxxxxxxxxxxxx>
>> wrote:
>>>
>>> Hi Liu,
>>>
>>>
>>> This feature is used in memory hotplug.
>>>
>>> In order to implement a whole node hotplug, we need to make sure the
>>> node contains no kernel memory, because memory used by kernel could
>>> not be migrated. (Since the kernel memory is directly mapped,
>>> VA = PA + __PAGE_OFFSET. So the physical address could not be changed.)
>>>
>>> User could specify all the memory on a node to be movable, so that the
>>> node could be hot-removed.
>>>
>>
>> Thank you for your explanation. It's reasonable.
>>
>> But i think it's a bit duplicated with CMA, i'm not sure but maybe we
>> can combine it with CMA which already in mainline?
>>
> Hi Liu,
>
> Thanks for your advice. :)
>
> CMA is Contiguous Memory Allocator, right?  What I'm trying to do is
> controlling where is the start of ZONE_MOVABLE of each node. Could
> CMA do this job ?

cma will not control the start of ZONE_MOVABLE of each node, but it
can declare a memory that always movable
and all non movable allocate request will not happen on that area.

Currently cma use a boot parameter "cma=" to declare a memory size
that always movable.
I think it might fulfill your requirement if extending the boot
parameter with a start address.

more info at http://lwn.net/Articles/468044/
>
> And also, after a short investigation, CMA seems need to base on
> memblock. But we need to limit memblock not to allocate memory on
> ZONE_MOVABLE. As a result, we need to know the ranges before memblock
> could be used. I'm afraid we still need an approach to get the ranges,
> such as a boot option, or from static ACPI tables such as SRAT/MPST.
>

Yes, it's based on memblock and with boot option.
In setup_arch32()
    dma_contiguous_reserve(0);   => will declare a cma area using
memblock_reserve()

> I'm don't know much about CMA for now. So if you have any better idea,
> please share with us, thanks. :)

My idea is reuse cma like below patch(even not compiled) and boot with
"cma=size@start_address".
I don't know whether it can work and whether suitable for your
requirement, if not forgive me for this noises.

diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c
index 612afcc..564962a 100644
--- a/drivers/base/dma-contiguous.c
+++ b/drivers/base/dma-contiguous.c
@@ -59,11 +59,18 @@ struct cma *dma_contiguous_default_area;
  */
 static const unsigned long size_bytes = CMA_SIZE_MBYTES * SZ_1M;
 static long size_cmdline = -1;
+static long cma_start_cmdline = -1;

 static int __init early_cma(char *p)
 {
+       char *oldp;
        pr_debug("%s(%s)\n", __func__, p);
+       oldp = p;
        size_cmdline = memparse(p, &p);
+
+       if (*p == '@')
+               cma_start_cmdline = memparse(p+1, &p);
+       printk("cma start:0x%x, size: 0x%x\n", size_cmdline, cma_start_cmdline);
        return 0;
 }
 early_param("cma", early_cma);
@@ -127,8 +134,10 @@ void __init dma_contiguous_reserve(phys_addr_t limit)
        if (selected_size) {
                pr_debug("%s: reserving %ld MiB for global area\n", __func__,
                         selected_size / SZ_1M);
-
-               dma_declare_contiguous(NULL, selected_size, 0, limit);
+               if (cma_size_cmdline != -1)
+                       dma_declare_contiguous(NULL, selected_size,
cma_start_cmdline, limit);
+               else
+                       dma_declare_contiguous(NULL, selected_size, 0, limit);
        }
 };

-- 
Regards,
--Bob
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux