Hi, On Fri, Sep 28, 2012 at 8:42 PM, Cousson, Benoit <b-cousson@xxxxxx> wrote: > On 9/28/2012 3:07 AM, ABRAHAM, KISHON VIJAY wrote: >> >> Hi, >> >> On Fri, Sep 28, 2012 at 4:18 AM, Cousson, Benoit <b-cousson@xxxxxx> wrote: >>> >>> On 9/27/2012 7:24 AM, Rob Herring wrote: >>>> >>>> >>>> On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote: >>>>> >>>>> >>>>> Hi, >>>>> >>>>> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@xxxxxxxxx> >>>>> wrote: >>>>>> >>>>>> >>>>>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote: >>>>>>> >>>>>>> >>>>>>> All phy related programming like enabling/disabling the clocks, >>>>>>> powering >>>>>>> on/off the phy is taken care of by this driver. It is also used for >>>>>>> OTG >>>>>>> related functionality like srp. >>>>>>> >>>>>>> This also includes device tree support for usb2 phy driver and >>>>>>> the documentation with device tree binding information is updated. >>>>>>> >>>>>>> Currently writing to control module register is taken care in this >>>>>>> driver which will be removed once the control module driver is in >>>>>>> place. >>>>>>> >>>>>>> Cc: Felipe Balbi <balbi@xxxxxx> >>>>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> >>>>>>> --- >>>>>>> Documentation/devicetree/bindings/usb/usb-phy.txt | 17 ++ >>>>>>> drivers/usb/phy/Kconfig | 9 + >>>>>>> drivers/usb/phy/Makefile | 1 + >>>>>>> drivers/usb/phy/omap-usb2.c | 271 >>>>>>> +++++++++++++++++++++ >>>>>>> include/linux/usb/omap_usb.h | 46 ++++ >>>>>>> include/linux/usb/phy_companion.h | 34 +++ >>>>>>> 6 files changed, 378 insertions(+) >>>>>>> create mode 100644 >>>>>>> Documentation/devicetree/bindings/usb/usb-phy.txt >>>>>>> create mode 100644 drivers/usb/phy/omap-usb2.c >>>>>>> create mode 100644 include/linux/usb/omap_usb.h >>>>>>> create mode 100644 include/linux/usb/phy_companion.h >>>>>>> >>>>>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt >>>>>>> b/Documentation/devicetree/bindings/usb/usb-phy.txt >>>>>>> new file mode 100644 >>>>>>> index 0000000..80d4148 >>>>>>> --- /dev/null >>>>>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt >>>>>> >>>>>> >>>>>> >>>>>> This is a very generic name... >>>>>> >>>>>>> @@ -0,0 +1,17 @@ >>>>>>> +USB PHY >>>>>>> + >>>>>>> +OMAP USB2 PHY >>>>>>> + >>>>>>> +Required properties: >>>>>>> + - compatible: Should be "ti,omap-usb2" >>>>>> >>>>>> >>>>>> >>>>>> ...for a specific phy. However, I do think a generic binding to >>>>>> describe >>>>>> host ctrlr to phy connections is needed. >>>>>> >>>>>>> + - reg : Address and length of the register set for the device. Also >>>>>>> +add the address of control module dev conf register until a driver >>>>>>> for >>>>>>> +control module is added >>>>>> >>>>>> >>>>>> >>>>>> The dts should describe the h/w, not what you need for the current >>>>>> driver. The 2nd reg field does not belong here. >>>>> >>>>> >>>>> >>>>> Indeed. This was discussed and agreed upon as a interim solution till >>>>> we have a control module driver in place to write to the control >>>>> module register. >>>> >>>> >>>> >>>> Discussed where and agreed by who? I for one do not agree. >>> >>> >>> >>> Yeah, what was tolerated was the addition of that address inside hwmod >>> data, >>> but I do agree that it should not go into DTS. >> >> >> So how can we handle reg writes to control module until we have a >> control module driver. usb2 phy does not have a hwmod data for itself. >> Do you think we should add a new hwmod data for usb2 phy and use this >> in the usb2phy data node in the dts file? > > > Now, I'm confused... didn't you already do that? What was the hwmod you > added? That was in usb_otg_hs (musb glue for omap) for writing to MUSB mailbox. This is for usb2 phy for powering on/off the PHY. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
