Added a driver for usb3 phy that handles the interaction between usb phy device and dwc3 controller. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Changes from v1: * Added missing clk_put() * Remove the patches usb: dwc3: Fix gadget pullup in SS mode and usb: phy: omap-usb3: Decrease the number of transitions to recovery. Those are actually WA for hw issues which will be fixed in ES2. * Removed the *has960mhzclk* property This patch series was rebased on git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv However the dependent modules are not yet upstreamed and hence only compile tested in this tree Kishon Vijay Abraham I (2): usb: phy: add a new driver for usb3 phy usb: phy: omap-usb2: enable 960Mhz clock for omap5 Documentation/devicetree/bindings/usb/usb-phy.txt | 18 + drivers/usb/phy/Kconfig | 9 + drivers/usb/phy/Makefile | 1 + drivers/usb/phy/omap-usb2.c | 18 +- drivers/usb/phy/omap-usb3.c | 412 +++++++++++++++++++++ include/linux/usb/omap_usb.h | 33 ++ 6 files changed, 489 insertions(+), 2 deletions(-) create mode 100644 drivers/usb/phy/omap-usb3.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html