Re: [PATCH v2] pwm_backlight: Add device tree support for Low Threshold Brightness

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 27, 2012 at 09:24:47AM +0000, Philip, Avinash wrote:
> On Wed, Sep 26, 2012 at 22:19:49, Thierry Reding wrote:
> > On Wed, Sep 26, 2012 at 09:27:51AM -0600, Stephen Warren wrote:
> > > On 09/25/2012 10:35 PM, Philip, Avinash wrote:
> > > > On Tue, Sep 25, 2012 at 11:49:14, Stephen Warren wrote:
> > > >> On 09/24/2012 10:29 PM, Philip, Avinash wrote:
> > > >>> On Fri, Sep 21, 2012 at 23:13:39, Stephen Warren wrote:
> > > >>>> On 09/21/2012 12:03 AM, Philip, Avinash wrote:
> > > >>>>> Hi Stephen,
> > > >>>>>
> > > >>>>> On Fri, Sep 21, 2012 at 10:46:45, Stephen Warren wrote:
> > > >>>>>> On 09/20/2012 10:51 PM, Philip, Avinash wrote:
> > > >>>>>>> Some backlights perform poorly when driven by a PWM with a short
> > > >>>>>>> duty-cycle. For such devices, the low threshold can be used to specify a
> > > >>>>>>> lower bound for the duty-cycle and should be chosen to exclude the
> > > >>>>>>> problematic range.
> > > >>>>>>>
> > > >>>>>>> This patch adds support for an optional low-threshold-brightness
> > > >>>>>>> property.
> > > >>>>>>
> > > >>>>>>> diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
> > > >>>>>>
> > > >>>>>>>  Optional properties:
> > > >>>>>>>    - pwm-names: a list of names for the PWM devices specified in the
> > > >>>>>>>                 "pwms" property (see PWM binding[0])
> > > >>>>>>> +  - low-threshold-brightness: brightness threshold low level. Low threshold
> > > >>>>>>> +    brightness set to value so that backlight present on low end of
> > > >>>>>>> +    brightness.
> > > >>>>>>
> > > >>>>>> For my education, why not just specify values above this value in the
> > > >>>>>> brightness-levels array; how do those two interact?
> > > >>>>>
> > > >>>>> Please find details from 
> > > >>>>> https://lkml.org/lkml/2012/7/18/284
> > > >>>>
> > > >>>> Hmm. That still doesn't really explain what this property does.
> > > >>>>
> > > >>>> I'm going to guess that if this property is present, and values in the
> > > >>>> brightness-levels property get scaled between the
> > > >>>> low-threshold-brightness and 255 instead of being used directly.
> > > >>>
> > > >>> This is correct.
> > > >>>
> > > >>>> But then, in the email you linked to, what does "But brightness-levels won't
> > > >>>> be uniformly divided" mean?
> > > >>>
> > > >>> For some panels, backlight would absent on low end of brightness due to low
> > > >>> percentage in duty_cycle. Consider following example where backlight absent
> > > >>> for brightness levels from 0 - 51.
> > > >>>
> > > >>> pwms = <&pwm 0 50000>;
> > > >>> brightness-levels = <0 51 53 56 62 75 101 152 255>; 
> > > >>> default-brightness-level = <6>;
> > > >>>
> > > >>> So in the example, brightness-levels are set to have values for backlight present.
> > > >>> Here levels are not uniformly divided.
> > > >>
> > > >> So why not just change the values so they /are/ what you want? After
> > > >> all, it's just data and you can put whatever values you want there. What
> > > >> is preventing you from doing this?
> > > > 
> > > > brightness_threshold_level was added to explore lth_brightness support already
> > > > present in non-DT case.
> > > 
> > > I understand that. Given my discussion above, I would advocate removing
> > > lth_brightness from the non-DT case rather than adding it to the DT
> > > case, since it seems entirely pointless.
> > 
> > It is still required for the case where brightness levels are not used.
> > So we can't drop it right away. I agree however that we should plan to
> > get rid of the max_brightness and lth_brightness eventually. Since the
> > DT bindings don't use it yet we should keep only the brightness levels.
> > Once all users have been converted we can rename max_brightness to
> > something like num_levels and remove lth_brightness. dft_brightness can
> > probably be renamed to default_level.
> 
> In non-DT case lth_brightness is required. 
> But for DT we have options with/without lth_brightness support. 
> In case if patch is dropped, user has to put proper brightness-levels 
> (brightness-levels DT parameters should be specified considering the 
> low-threshold values)
> 
> Meanwhile I had submitted another version yesterday (with more documentation)
> 
> [PATCH v3] pwm_backlight: Add device tree support for Low Threshold Brightness
> 
> https://lkml.org/lkml/2012/9/26/271
> 
> Thierry,
> 
> Can you please confirm the acceptance/rejection of the patch? This will help me
> to submit the backlight DT blob for AM335x platform.

Let's go with the brightness levels approach. We have the upcoming power
sequence stuff that is needed to get rid of the platform data callbacks
and I'm afraid if we keep adding wildly. I think there are already too
many possible combinations right now and we should get them cleaned up
sooner rather than later.

Thierry

Attachment: pgpYwUr4wUCj1.pgp
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux