On Sun, 16 Sep 2012, Jason Cooper wrote: > On Sun, Sep 16, 2012 at 09:46:52AM +0200, Andrew Lunn wrote: > > > +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt > > > @@ -0,0 +1,279 @@ > > > +* Marvell Kirkwood SoC pinctrl driver for mpp > > > + > > > +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding > > > +part and usage. > > > + > > > +Required properties: > > > +- compatible: "marvell,88f6180-pinctrl", > > > + "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", > > > + "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" > > > + > > > +This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628 > > > > Hi Sebastian > > > > The current MPP code determines for itself what chip it is running on. > > It can then check if a pin configuration is valid for the current > > run time environment. > > > > Here you are suggesting we have to put into the DT what chip we expect > > to be on. > > > > What is the advantage of this, over getting the information from the > > device itself? > > The DT should describe the hardware as accurately as possible. We can't > always assume Linux will be the only thing the DT is handed off to. > > > If i wanted to mass convert all existing kirkwood DT boards over to > > use pinctrl, im stuck at the very first step. I've no idea what chip > > they use, it was not relevant before. > > Let's try to do the DT correctly, and create a migration path for > kirkwood to work first, then migrate to using the DT fully. Beware beware. The DT should of course describe the hardware as accurately as possible. That doesn't necessarily mean it should describe the hardware as _extensively_ as possible. And that doesn't mean that all the information found in the DT has to be consumed by the kernel either. Any information that can be *probed* at run time has no benefit being stuffed in a DT. That's true whether it is Linux or another operating system. The more that can be probed at run time the better. Nicolas -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
