Re: [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Sep 06, 2012 at 09:04:58PM +0530, Vaibhav Hiremath wrote:
> 
> 
> On 9/6/2012 8:25 PM, Kishon Vijay Abraham I wrote:
> > The mailbox register for usb otg in omap is present in control module.
> > On detection of any events VBUS or ID, this register should be written
> > to send the notification to musb core.
> > 
> > Till we have a separate control module driver to write to control module,
> > omap2430 will handle the register writes to control module by itself. So
> > a new address space to represent this control module register is added
> > to usb_otg_hs.
> > 
> > Cc: Benoit Cousson <b-cousson@xxxxxx>
> > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> > ---
> >  arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> > index 242aee4..02341bc 100644
> > --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> > +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> > @@ -5890,6 +5890,11 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
> >  		.pa_end		= 0x4a0ab003,
> >  		.flags		= ADDR_TYPE_RT
> >  	},
> > +	{
> > +		.pa_start	= 0x4a00233c,
> > +		.pa_end		= 0x4a00233f,
> > +		.flags		= ADDR_TYPE_RT
> > +	},
> 
> I do not have any objection/comment here, but I believe this is control
> module address space required for USB module, right?
> I am not sure this is right way of accessing control module space.
> Actually Control Module Access required for drivers is one of the
> blocking issue we have currently.
> 
> Also there was some effort put up by 'Konstantine' to convert Control
> module to MFD driver, I haven't seen any further update on it. But it
> would be good to check with him.

this was an agreement with Benoit since we already lost a couple merge
windows for this patchset. We agreed to wait until -rc4 for SCM driver
and if it wasn't ready, we'd go ahead with this and SCM author would fix
it up on a patch converting users to new SCM driver.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux