> nvpublic > > On 08/24/2012 06:36 PM, Bill Huang wrote: > > >>> On Sun, Aug 19, 2012 at 06:07:55PM -0700, Bill Huang wrote: > > >>>> Add DT property "ti,system-power-controller" telling whether or > > >>>> not this pmic is in charge of controlling the system power, so > > >>>> the power off routine can be hooked up to system call "pm_power_off". > > ... > > >>> I've seen the following while trying this patch applied on top of next-20120817: > > >>> > > >>> [ 40.581151] Power down. > > >>> [ 41.583160] ------------[ cut here ]------------ > > >>> [ 41.587784] WARNING: at /home/thierry.reding/src/kernel/linux- > ipmp.git/drivers/i2c/busses/i2c- > > >>> tegra.c:525 tegra_i2c_xfer+0x21c/0x29c() > > ... > > >> Thanks Thierry, I can repro this on Tegra20 inconsistently and > > >> found, if current cpu is not cpu0 when doing "machine_shutdown" (it > > >> will call "smp_send_stop"), i2c controller will failed to do any > > >> transaction (looks like gic interrupt > > will be disabled), I'll debug further to find out the root cause. > > >> > > >> By the way, Tegra30 is good since it will always be cpu0 when doing > > >> "machine_shutdown", I still don't know why it makes the difference > > >> against Tegra20 since I'm not familiar with those cpu stuffs and > > >> what make it behave differently, > > I'll study a bit, thanks. > > > > > > I've sent the shutdown issue for discussion in ARM list: Shutdown > > > problem in SMP system happened on > > Tegra20. > > > The cause of the i2c timeout is pretty clear now and it is not > > > directly related to this patch, so is this patch series acceptable? Any thoughts or comment? > Thanks. > > > > I tend to agree; power off never worked without this patch, and > > sometimes does with the patch, due to nothing wrong with this patch. > > > > Bill, please do follow up on getting the underlying Tegra issue solved > > somehow though. IIRC, Joseph Lo or Prashant has a patch which enabled > > the config option that Russell mentioned, so the fix may just be to wait for that patch to get > finalized, but please double-check that solves it. > > Thanks! > > As per the shutdown issue discussion, enabling CONFIG_PM_SLEEP_SMP is the only solution and I've > confirmed that fix the issue, thanks. Hi sameo, Is there any concern on this patch series? Thanks, Bill -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html