Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, 2012-08-16 at 15:08 +0900, Alexandre Courbot wrote:

> +Problem
> +-------
> +One very common board-dependent code is the out-of-driver code that is used to
> +turn a device on or off. For instance, SoC boards very commonly use a GPIO
> +(abstracted to a regulator or not) to control the power supply of a backlight,
> +disabling it when the backlight is not used in order to save power. The GPIO
> +that should be used, however, as well as the exact power sequence that may
> +also involve other resources, is board-dependent and thus unknown of the driver.
> +
> +This was previously addressed by having hooks in the device's platform data that
> +are called whenever the state of the device might reflect a power change. This
> +approach, however, introduces board-dependant code into the kernel and is not
> +compatible with the device tree.

I've been having the same problems on OMAP display related code, but the
problem has always been fixable by just having the driver to use a
common framework to do the job (a framework which may not have existed
at the time). The problems have never been board specific in the end,
but device specific.

Can you describe your particular HW problem a bit more? In the backlight
case, what exactly requires the delays and the sequence you show in the
example to enable/disable the backlight?

 Tomi

Attachment: signature.asc
Description: This is a digitally signed message part


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux