Add devicetree support for vt8500-ehci.
Convert vt8500-uhci to a generic non-pci platform-uhci with
device tree support.
Signed-off-by: Tony Prisk <linux@xxxxxxxxxxxxxxx>
---
drivers/usb/host/Kconfig | 4 +-
drivers/usb/host/ehci-vt8500.c | 24 ++++--
drivers/usb/host/uhci-hcd.c | 5 ++
drivers/usb/host/uhci-platform.c | 166 ++++++++++++++++++++++++++++++++++++++
4 files changed, 191 insertions(+), 8 deletions(-)
create mode 100644 drivers/usb/host/uhci-platform.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index dcfaaa9..d7a6b10 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -450,7 +450,7 @@ config USB_OHCI_LITTLE_ENDIAN
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on USB && (PCI || SPARC_LEON)
+ depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
@@ -468,7 +468,7 @@ config USB_UHCI_HCD
config USB_UHCI_SUPPORT_NON_PCI_HC
bool
depends on USB_UHCI_HCD
- default y if SPARC_LEON
+ default y if (SPARC_LEON || ARCH_VT8500)
config USB_UHCI_BIG_ENDIAN_MMIO
bool
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index c1eda73..52e9f92 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -16,6 +16,7 @@
*
*/
+#include <linux/of.h>
#include <linux/platform_device.h>
static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
@@ -84,20 +85,23 @@ static const struct hc_driver vt8500_ehci_hc_driver = {
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
+static u64 wmt_ehci_dma_mask = DMA_BIT_MASK(32);
+
static int vt8500_ehci_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct resource *res;
+ int irq;
int ret;
if (usb_disabled())
return -ENODEV;
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
- return -ENOMEM;
- }
+ /* devicetree created devices don't specify a dma mask */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &wmt_ehci_dma_mask;
+
hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500");
if (!hcd)
return -ENOMEM;
@@ -134,8 +138,9 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)
ehci_reset(ehci);
- ret = usb_add_hcd(hcd, pdev->resource[1].start,
- IRQF_SHARED);
+ irq = platform_get_irq(pdev, 0);
+
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret == 0) {
platform_set_drvdata(pdev, hcd);
return ret;
@@ -162,6 +167,11 @@ static int vt8500_ehci_drv_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id vt8500_ehci_ids[] = {
+ { .compatible = "via,vt8500-ehci", },
+ {}
+};
+
static struct platform_driver vt8500_ehci_driver = {
.probe = vt8500_ehci_drv_probe,
.remove = vt8500_ehci_drv_remove,
@@ -169,7 +179,9 @@ static struct platform_driver vt8500_ehci_driver = {
.driver = {
.name = "vt8500-ehci",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(vt8500_ehci_ids),
}
};
MODULE_ALIAS("platform:vt8500-ehci");
+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index e4db350..5da5c99 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -846,6 +846,11 @@ static const char hcd_name[] = "uhci_hcd";
#define PLATFORM_DRIVER uhci_grlib_driver
#endif
+#ifdef CONFIG_ARCH_VT8500
+#include "uhci-platform.c"
+#define PLATFORM_DRIVER uhci_platform_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
#error "missing bus glue for uhci-hcd"
#endif
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
new file mode 100644
index 0000000..1d7e522
--- /dev/null
+++ b/drivers/usb/host/uhci-platform.c
@@ -0,0 +1,166 @@
+/*
+ * Generic UHCI HCD (Host Controller Driver) for Platform Devices
+ *
+ * Copyright (c) 2011 Tony Prisk <linux@xxxxxxxxxxxxxxx>
+ *
+ * This file is based on uhci-grlib.c
+ * (C) Copyright 2004-2007 Alan Stern, stern@xxxxxxxxxxxxxxxxxxx
+ */
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static int uhci_platform_init(struct usb_hcd *hcd)
+{
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+ uhci->rh_numports = uhci_count_ports(hcd);
+
+ /* Set up pointers to to generic functions */
+ uhci->reset_hc = uhci_generic_reset_hc;
+ uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+
+ /* No special actions need to be taken for the functions below */
+ uhci->configure_hc = NULL;
+ uhci->resume_detect_interrupts_are_broken = NULL;
+ uhci->global_suspend_mode_is_broken = NULL;
+
+ /* Reset if the controller isn't already safely quiescent. */
+ check_and_reset_hc(uhci);
+ return 0;
+}
+
+static const struct hc_driver uhci_platform_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Generic UHCI Host Controller",
+ .hcd_priv_size = sizeof(struct uhci_hcd),
+
+ /* Generic hardware linkage */
+ .irq = uhci_irq,
+ .flags = HCD_MEMORY | HCD_USB11,
+
+ /* Basic lifecycle operations */
+ .reset = uhci_platform_init,
+ .start = uhci_start,
+#ifdef CONFIG_PM
+ .pci_suspend = NULL,
+ .pci_resume = NULL,
+ .bus_suspend = uhci_rh_suspend,
+ .bus_resume = uhci_rh_resume,
+#endif
+ .stop = uhci_stop,
+
+ .urb_enqueue = uhci_urb_enqueue,
+ .urb_dequeue = uhci_urb_dequeue,
+
+ .endpoint_disable = uhci_hcd_endpoint_disable,
+ .get_frame_number = uhci_hcd_get_frame_number,
+
+ .hub_status_data = uhci_hub_status_data,
+ .hub_control = uhci_hub_control,
+};
+
+static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
+
+static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct uhci_hcd *uhci;
+ struct resource *res;
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &platform_uhci_dma_mask;
+
+ hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
+ pdev->name);
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ pr_err("%s: request_mem_region failed\n", __func__);
+ ret = -EBUSY;
+ goto err_rmr;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ pr_err("%s: ioremap failed\n", __func__);
+ ret = -ENOMEM;
+ goto err_irq;
+ }
+ uhci = hcd_to_uhci(hcd);
+
+ uhci->regs = hcd->regs;
+
+ ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED |
+ IRQF_SHARED);
+ if (ret)
+ goto err_uhci;
+
+ return 0;
+
+err_uhci:
+ iounmap(hcd->regs);
+err_irq:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+ usb_put_hcd(hcd);
+
+ return ret;
+}
+
+static int uhci_hcd_platform_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more. This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel. Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_platform_shutdown(struct platform_device *op)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+ uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id platform_uhci_ids[] = {
+ { .compatible = "platform-uhci", },
+ {}
+};
+
+static struct platform_driver uhci_platform_driver = {
+ .probe = uhci_hcd_platform_probe,
+ .remove = uhci_hcd_platform_remove,
+ .shutdown = uhci_hcd_platform_shutdown,
+ .driver = {
+ .name = "platform-uhci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(platform_uhci_ids),
+ },
+};
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
