This patch series is done as a preparatory step for adding phy drivers for dwc3 and musb. This series adds a new driver for ocp2scp (only dt) to which phy drivers are connected. Since currently there is no generic way to create a child device along with doing a pm_runtime_enable (the exact requirement for ocp2scp), I'm creating a separate driver for ocp2scp. Changes from [RFC PATCH v2 0/2] omap: add ocp2scp as a misc driver: Created a new folder drivers/bus and moved ocp2scp driver from misc to drivers/bus. This patch was developed and tested on git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git Kishon Vijay Abraham I (2): drivers: bus: add a new driver for omap-ocp2scp arm/dts: omap4: Add ocp2scp data .../devicetree/bindings/bus/omap-ocp2scp.txt | 10 ++ arch/arm/boot/dts/omap4.dtsi | 8 ++ drivers/Kconfig | 2 + drivers/Makefile | 2 + drivers/bus/Kconfig | 15 +++ drivers/bus/Makefile | 5 + drivers/bus/omap-ocp2scp.c | 98 ++++++++++++++++++++ 7 files changed, 140 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/omap-ocp2scp.txt create mode 100644 drivers/bus/Kconfig create mode 100644 drivers/bus/Makefile create mode 100644 drivers/bus/omap-ocp2scp.c -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
