Re: [PATCH] i2c: sis964: bus driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 13, 2012 at 3:40 AM, Amaury Decrême
<amaury.decreme@xxxxxxxxx> wrote:
> This patch is a driver for SiS964 I2C bus.
>
> It was forked from i2c-sis630 and modified with SiS datasheets.
>
> Tested with kmemleak.
>
> Signed-off-by: Amaury Decrême <amaury.decreme@xxxxxxxxx>
> ---
>  Documentation/i2c/busses/i2c-sis964 |   34 ++
>  MAINTAINERS                         |   16 +
>  drivers/i2c/busses/Kconfig          |   12 +-
>  drivers/i2c/busses/Makefile         |    1 +
>  drivers/i2c/busses/i2c-sis964.c     |  575 +++++++++++++++++++++++++++++++++++
>  include/linux/pci_ids.h             |    1 +
>  6 files changed, 638 insertions(+), 1 deletions(-)
>  create mode 100644 Documentation/i2c/busses/i2c-sis964
>  create mode 100644 drivers/i2c/busses/i2c-sis964.c
>
> diff --git a/Documentation/i2c/busses/i2c-sis964 b/Documentation/i2c/busses/i2c-sis964
> new file mode 100644
> index 0000000..a831f1a
> --- /dev/null
> +++ b/Documentation/i2c/busses/i2c-sis964
> @@ -0,0 +1,34 @@
> +Kernel driver i2c-sis964
> +
> +Supported adapters:
> +  * Silicon Integrated Systems Corp (SiS)
> +       964 chipset (Datasheet by SiS)
> +  * Possible other SiS chipsets with the same registers and clocks
> +
> +Author:        Amaury Decrême <amaury.decreme@xxxxxxxxx>
> +
> +Module Parameters
> +-----------------
> +
> +* force = [1|0]        Forcibly enable the SIS964. DANGEROUS!
> +                       This can be interesting for chipsets not named
> +                       above to check if it works for you chipset,
> +                       but DANGEROUS!
> +
> +* low_clock = [1|0]    1 = Set Host Master Clock to 28KHz (defaut 56Khz)
> +
> +Description
> +-----------
> +
> +This SMBus driver is known to work on motherboards with the SiS964 chipset.
> +
> +If you see something like this:
> +
> +00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO]
> +
> +in your 'lspci' output , then this driver is for your chipset.
> +
> +Thank You
> +---------
> +Alexander Malysh <amalysh@xxxxxx>
> +- Who has written i2c-sis630, from which i2c-sis964 is forked
> diff --git a/MAINTAINERS b/MAINTAINERS
> index eb22272..4a11805 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6179,6 +6179,22 @@ S:       Maintained
>  F:     Documentation/i2c/busses/i2c-sis96x
>  F:     drivers/i2c/busses/i2c-sis96x.c
>
> +SIS 964 I2C/SMBUS DRIVER
> +M:     "Amaury Decrême" <amaury.decreme@xxxxxxxxx>
> +L:     linux-i2c@xxxxxxxxxxxxxxx
> +S:     Maintained
> +F:     Documentation/i2c/busses/i2c-sis96i4
> +F:     drivers/i2c/busses/i2c-sis964.c
> +
> +SIS FRAMEBUFFER DRIVER
> +M:     Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx>
> +W:     http://www.winischhofer.net/linuxsisvga.shtml
> +S:     Maintained
> +F:     Documentation/fb/sisfb.txt
> +F:     drivers/video/sis/
> +F:     include/video/sisfb.h
> +
> +SIS USB2VGA DRIVER
>  SIS FRAMEBUFFER DRIVER
>  M:     Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx>
>  W:     http://www.winischhofer.net/linuxsisvga.shtml
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 7244c8b..8dc9f90 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -189,8 +189,18 @@ config I2C_SIS630
>           This driver can also be built as a module.  If so, the module
>           will be called i2c-sis630.
>
> +config I2C_SIS964
> +       tristate "SiS 964"
> +       depends on PCI && EXPERIMENTAL
> +       help
> +         If you say yes to this option, support will be included for the SiS
> +         964 SMBus (a subset of I2C) interfaces.
> +
> +         This driver can also be built as a module.  If so, the module
> +         will be called i2c-sis964.
> +
>  config I2C_SIS96X
> -       tristate "SiS 96x"
> +       tristate "SiS 96x (but SiS964)"
>         depends on PCI
>         help
>           If you say yes to this option, support will be included for the SiS
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index ce3c2be..b985bc8 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_NFORCE2_S4985)       += i2c-nforce2-s4985.o
>  obj-$(CONFIG_I2C_PIIX4)                += i2c-piix4.o
>  obj-$(CONFIG_I2C_SIS5595)      += i2c-sis5595.o
>  obj-$(CONFIG_I2C_SIS630)       += i2c-sis630.o
> +obj-$(CONFIG_I2C_SIS964)       += i2c-sis964.o
>  obj-$(CONFIG_I2C_SIS96X)       += i2c-sis96x.o
>  obj-$(CONFIG_I2C_VIA)          += i2c-via.o
>  obj-$(CONFIG_I2C_VIAPRO)       += i2c-viapro.o
> diff --git a/drivers/i2c/busses/i2c-sis964.c b/drivers/i2c/busses/i2c-sis964.c
> new file mode 100644
> index 0000000..9f4ed14
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-sis964.c
> @@ -0,0 +1,575 @@
> +/*
> +    Copyright (c) 2012 Amaury Decrême <amaury.decreme@xxxxxxxxx>
> +
> +    This program is free software; you can redistribute it and/or modify
> +    it under the terms of the GNU General Public License as published by
> +    the Free Software Foundation; either version 2 of the License, or
> +    (at your option) any later version.
> +
> +    This program is distributed in the hope that it will be useful,
> +    but WITHOUT ANY WARRANTY; without even the implied warranty of
> +    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +    GNU General Public License for more details.
> +
> +    You should have received a copy of the GNU General Public License
> +    along with this program; if not, write to the Free Software
> +    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> +*/
> +
> +/*
> +   Changes:
> +   11.08.2011
> +       Fork of original i2c-sis630 - Alexander Malysh <amalysh@xxxxxx>
> +       Adapted for SiS964 with datasheets
> +                       - Amaury Decrême <amaury.decreme@xxxxxxxxx>
> +*/
> +
> +/*
> +   Supports:
> +       SIS 964
> +
> +   Note: we assume there can only be one device, with one SMBus interface.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/pci.h>
> +#include <linux/ioport.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/acpi.h>
> +#include <linux/io.h>
> +
> +/* SIS964 SMBus registers */
> +#define SMB_STS                        0xE0    /* status */
> +#define SMB_EN                 0xE1    /* status enable */
> +#define SMB_CNT                        0xE2    /* Control */
> +#define SMBHOST_CNT            0xE3    /* Host Control */
> +#define SMB_ADDR               0xE4    /* Address */
> +#define SMB_CMD                        0xE5    /* Command */
> +#define SMB_PERRCHK            0xE6    /* Packet Error Check */
> +#define SMB_COUNT              0xE7    /* Byte Count */
> +#define SMB_BYTE               0xE8    /* ~0x8F data byte field */
> +#define SMBDEV_ADDR            0xF0    /* Device Address */
> +#define SMB_DB0                        0xF1    /* Device byte0 */
> +#define SMB_DB1                        0xF2    /* Device byte1 */
> +#define SMB_SAA                        0xF3    /* Host slave alias address */
> +#define SMB_PCOUNT             0xF4    /* processed byte count */
> +
> +
> +/* SMB_STS register */
> +#define SMBALT_STS             0x80    /* Slave alert */
> +#define BYTE_DONE_STS          0x10    /* Byte Done Status / Block Array */
> +#define SMBMAS_STS             0x08    /* Host Master */
> +#define SMBCOL_STS             0x04    /* Collision */
> +#define SMBERR_STS             0x02    /* Device error */
> +
> +/* SMB_CNT register */
> +#define SMBCLK_SEL             0x20    /* Host master clock selection */
> +#define SMB_PROBE              0x02    /* Bus Probe */
> +#define SMB_HOSTBUSY           0x01    /* Host Busy */
> +
> +/* SMBHOST_CNT register */
> +#define SMB_KILL               0x20    /* Kill */
> +#define SMB_START              0x10    /* Start */
> +#define SMB_PTL                        0x07    /* Command Protocol */
> +
> +
> +/* SMB_ADDR register */
> +#define SMB_ADDRESS            0xFE    /* Adress */
> +#define SMB_RW                 0x01    /* Read/Write */
> +
> +
> +/* SMB_BYTE register */
> +#define SMB_BYTE0              0xFF    /* Byte 0 */
> +#define SMB_BYTE1              0xFF00  /* Byte 1 */
> +
> +/* register count for request_region */
> +#define SIS964_SMB_IOREGION    21
> +
> +/* PCI address constants */
> +/* acpi base address register  */
> +#define SIS964_ACPI_BASE_REG   0x74
> +/* bios control register */
> +#define SIS964_BIOS_CTL_REG    0x40
> +
> +/* Other settings */
> +#define MAX_TIMEOUT            500
> +
> +/* SIS964 constants */
> +#define SIS964_QUICK           0x00
> +#define SIS964_BYTE            0x01
> +#define SIS964_BYTE_DATA       0x02
> +#define SIS964_WORD_DATA       0x03
> +#define SIS964_PCALL           0x04
> +#define SIS964_BLOCK_DATA      0x05
> +
> +static struct pci_driver sis964_driver;
> +
> +/* insmod parameters */
> +static bool low_clock;
> +static bool force;
> +module_param(low_clock, bool, 0);
> +MODULE_PARM_DESC(low_clock, "Set Host Master Clock to 28KHz (default 56KHz).");
> +module_param(force, bool, 0);
> +MODULE_PARM_DESC(force, "Forcibly enable the SIS964. DANGEROUS!");
> +
> +/* acpi base address */
> +static unsigned short acpi_base;
> +
> +/* supported chips */
> +static int supported[] = {
> +       PCI_DEVICE_ID_SI_964,
> +       0 /* terminates the list */
> +};
> +
> +static inline u8 sis964_read(u8 reg)
> +{
> +       return inb(acpi_base + reg);
> +}
> +
> +static inline void sis964_write(u8 reg, u8 data)
> +{
> +       outb(data, acpi_base + reg);
> +}
> +
> +static int sis964_transaction_start(struct i2c_adapter *adap,
> +                                       int ptl, u8 *oldclock)
> +{
> +       int tmp = 0;
> +
> +       /* Clear status register */
> +       sis964_write(SMB_STS, 0xFF);
> +
> +       /* Make sure the SMBus host is ready to start transmitting. */
> +       tmp = sis964_read(SMB_CNT);
> +       if (tmp & (SMB_PROBE | SMB_HOSTBUSY)) {
> +               dev_dbg(&adap->dev,
> +                       "Bus busy (status 0x%02x). Killing transaction.\n",
> +                       tmp);
> +
> +               sis964_write(SMBHOST_CNT, SMB_KILL);
> +
> +               return -EBUSY;
> +       }
> +
> +       /* Set Host Master Clock to 28KHz if requested */
> +       if (low_clock) {
> +               *oldclock = sis964_read(SMB_CNT);
> +               sis964_write(SMB_CNT, SMBCLK_SEL);
> +       }
> +
> +       /* start the transaction by setting bit start and protocol */
> +       sis964_write(SMBHOST_CNT, SMB_START | (ptl & SMB_PTL));
> +
> +       return 0;
> +}
> +
> +static int sis964_transaction_wait(struct i2c_adapter *adap, int ptl)
> +{
> +       int tmp = 0, timeout = 0;
> +
> +       /* Wait 30us, valid for 28Khz and 56Khz */
> +       udelay(30);
> +
> +       tmp = sis964_read(SMB_STS);
> +       if (!(tmp & SMB_PROBE) && (tmp & SMB_HOSTBUSY)) {
> +               dev_dbg(&adap->dev,
> +                       "Host busy (status 0x%02x). Restarting transaction.\n",
> +                       tmp);
> +               sis964_write(SMBHOST_CNT, SMB_KILL);
> +               return -EAGAIN;
> +       }
> +
> +       while (!(ptl == SIS964_BLOCK_DATA && (tmp & BYTE_DONE_STS))
> +               && !(tmp & (SMBMAS_STS | SMBCOL_STS | SMBERR_STS))
> +               && (timeout++ < MAX_TIMEOUT)) {
> +
> +               /* Datasheets: wait 4ms max at 28Khz and
> +                * 2ms max at 56Khz for 8 bytes */
> +               if (low_clock)
> +                       udelay(4000);
> +               else
> +                       udelay(2000);
> +               tmp = sis964_read(SMB_STS);
> +       }
> +
> +       /* If the SMBus is still busy, we give up */
> +       if (timeout > MAX_TIMEOUT) {
> +               dev_dbg(&adap->dev,
> +                       "Bus Timeout (status 0x%02x)!\n", tmp);
> +               return -ETIMEDOUT;
> +       }
> +
> +       if (tmp & SMBERR_STS) {
> +               dev_dbg(&adap->dev,
> +                       "Failed bus transaction (status 0x%02x)!\n", tmp);
> +               return -ENXIO;
> +       }
> +
> +       if (tmp & SMBCOL_STS) {
> +               dev_err(&adap->dev,
> +                       "Bus collision (status 0x%02x)!\n", tmp);
> +               sis964_write(SMB_STS, tmp & ~SMBCOL_STS);
> +               return -EAGAIN;
> +       }
> +
> +       return 0;
> +}
> +
> +static void sis964_transaction_end(u8 oldclock)
> +{
> +       /* clear all status "sticky" bits */
> +       sis964_write(SMB_STS, 0xFF);
> +
> +       /* restore old Host Master Clock if low_clock is set */
> +       if (low_clock)
> +               sis964_write(SMB_CNT, oldclock & SMBCLK_SEL);
> +}
> +
> +static int sis964_transaction(struct i2c_adapter *adap, int ptl)
> +{
> +       int tmp = 0, timeout = 0;
> +       u8 oldclock = 0;
> +
> +       do {
> +               tmp = sis964_transaction_start(adap, ptl, &oldclock);
> +               if (tmp)
> +                       return tmp;
> +
> +               tmp = sis964_transaction_wait(adap, ptl);
> +               sis964_transaction_end(oldclock);
> +       } while (tmp == -EAGAIN && timeout++ < MAX_TIMEOUT);
> +
> +       if (timeout > MAX_TIMEOUT) {
> +               dev_dbg(&adap->dev, "Bus timeout !\n");
> +               return -ETIMEDOUT;
> +       }
> +
> +       return 0;
> +}
> +
> +static int sis964_block_data_read(struct i2c_adapter *adap,
> +                               union i2c_smbus_data *data)
> +{
> +       int i, len = 0, tmp = 0;
> +       u8 oldclock = 0;
> +
> +       data->block[0] = len = 0;
> +
> +       tmp = sis964_transaction_start(adap, SIS964_BLOCK_DATA, &oldclock);
> +       if (tmp)
> +               return tmp;
> +
> +       do {
> +               tmp = sis964_transaction_wait(adap, SIS964_BLOCK_DATA);
> +               if (tmp) {
> +                       dev_dbg(&adap->dev, "Transaction wait failed\n");
> +                       break;
> +               }
> +
> +               /* if this first transaction then read byte count */
> +               if (len == 0)
> +                       data->block[0] = sis964_read(SMB_COUNT);
> +
> +               if (data->block[0] > 32)
> +                       data->block[0] = 32;
> +
> +               dev_dbg(&adap->dev, "Block data read len=0x%x\n",
> +                       data->block[0]);
> +
> +               for (i = 0; i < 8 && len < data->block[0]; i++, len++) {
> +                       dev_dbg(&adap->dev, "Read i=%d len=%d\n", i, len);
> +                       data->block[len+1] = sis964_read(SMB_BYTE+i);
> +               }
> +
> +               /* clear BYTE_DONE_STS */
> +               sis964_write(SMB_STS, BYTE_DONE_STS);
> +       } while (len < data->block[0]);
> +
> +       sis964_transaction_end(oldclock);
> +
> +       return 0;
> +}
> +
> +
> +static int sis964_block_data_write(struct i2c_adapter *adap,
> +                               union i2c_smbus_data *data)
> +{
> +
> +       int i, len = 0, tmp = 0;
> +       u8 oldclock = 0;
> +
> +       len = data->block[0];
> +       if (len < 0)
> +               len = 0;
> +       else if (len > 32)
> +               len = 32;
> +
> +       sis964_write(SMB_COUNT, len);
> +
> +       for (i = 1; i <= len; i++) {
> +               dev_dbg(&adap->dev, "Set data 0x%02x\n", data->block[i]);
> +
> +               /* set data */
> +               sis964_write(SMB_BYTE+(i-1)%8, data->block[i]);
> +               if (i == 8 || (len < 8 && i == len)) {
> +
> +                       /* first transaction */
> +                       tmp = sis964_transaction_start(adap, SIS964_BLOCK_DATA,
> +                                       &oldclock);
> +                       if (tmp)
> +                               return tmp;
> +
> +               } else if ((i-1)%8 == 7 || i == len) {
> +                       if (i > 8) {
> +                               dev_dbg(&adap->dev,
> +                               "Clear smbary_sts len=%d i=%d\n", len, i);
> +
> +                               /*
> +                                  If this is not first transaction,
> +                                  we must clear sticky bit.
> +                                  clear BYTE_DONE-STS
> +                               */
> +                               sis964_write(SMB_STS, BYTE_DONE_STS);
> +                       }
> +                       tmp = sis964_transaction_wait(adap,
> +                                       SIS964_BLOCK_DATA);
> +                       if (tmp) {
> +                               dev_dbg(&adap->dev,
> +                                       "Transaction wait failed\n");
> +                               break;
> +                       }
> +               }
> +       }
> +
> +       sis964_transaction_end(oldclock);
> +
> +       return 0;
> +}
> +
> +static int sis964_block_data(struct i2c_adapter *adap,
> +                               union i2c_smbus_data *data, int read_write)
> +{
> +       if (read_write == I2C_SMBUS_WRITE)
> +               return sis964_block_data_write(adap, data);
> +       else
> +               return sis964_block_data_read(adap, data);
> +}
> +
> +/* Return negative errno on error. */
> +static s32 sis964_access(struct i2c_adapter *adap, u16 addr,
> +                        unsigned short flags, char read_write,
> +                        u8 command, int ptl, union i2c_smbus_data *data)
> +{
> +       int tmp = 0;
> +
> +       switch (ptl) {
> +       case I2C_SMBUS_QUICK:
> +               sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
> +                                       (read_write & SMB_RW));
> +               ptl = SIS964_QUICK;
> +               break;
> +       case I2C_SMBUS_BYTE:
> +               sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
> +                                       (read_write & SMB_RW));
> +               if (read_write == I2C_SMBUS_WRITE)
> +                       sis964_write(SMB_CMD, command);
> +               ptl = SIS964_BYTE;
> +               break;
> +       case I2C_SMBUS_BYTE_DATA:
> +               sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
> +                                       (read_write & SMB_RW));
> +               sis964_write(SMB_CMD, command);
> +               if (read_write == I2C_SMBUS_WRITE)
> +                       sis964_write(SMB_BYTE, data->byte);
> +               ptl = SIS964_BYTE_DATA;
> +               break;
> +       case I2C_SMBUS_PROC_CALL:
> +       case I2C_SMBUS_WORD_DATA:
> +               sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
> +                                       (read_write & SMB_RW));
> +               sis964_write(SMB_CMD, command);
> +               if (read_write == I2C_SMBUS_WRITE) {
> +                       sis964_write(SMB_BYTE, data->word & SMB_BYTE0);
> +                       sis964_write(SMB_BYTE + 1,
> +                                       (data->word & SMB_BYTE1) >> 8);
> +               }
> +               ptl = (ptl == I2C_SMBUS_PROC_CALL ?
> +                               SIS964_PCALL : SIS964_WORD_DATA);
> +               break;
> +       case I2C_SMBUS_BLOCK_DATA:
> +               sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
> +                                       (read_write & SMB_RW));
> +               sis964_write(SMB_CMD, command);
> +               ptl = SIS964_BLOCK_DATA;
> +               return sis964_block_data(adap, data, read_write);
> +       default:
> +               dev_warn(&adap->dev, "Unsupported transaction %d\n",
> +                        ptl);
> +               return -EOPNOTSUPP;
> +       }
> +
> +       tmp = sis964_transaction(adap, ptl);
> +       if (tmp)
> +               return tmp;
> +
> +       if (ptl != SIS964_PCALL &&
> +               (read_write == I2C_SMBUS_WRITE || ptl == SIS964_QUICK)) {
> +               return 0;
> +       }
> +
> +       switch (ptl) {
> +       case SIS964_BYTE:
> +       case SIS964_BYTE_DATA:
> +               data->byte = sis964_read(SMB_BYTE);
> +               break;
> +       case SIS964_PCALL:
> +       case SIS964_WORD_DATA:
> +               data->word = sis964_read(SMB_BYTE) +
> +                               (sis964_read(SMB_BYTE + 1) << 8);
> +               break;
> +       }
> +
> +       return 0;
> +}
> +
> +static u32 sis964_func(struct i2c_adapter *adapter)
> +{
> +       /* SMBus Command protocol supported */
> +       return I2C_FUNC_SMBUS_QUICK |           /* Quick command */
> +               I2C_FUNC_SMBUS_BYTE |           /* Send/Receive Byte */
> +               I2C_FUNC_SMBUS_BYTE_DATA |      /* Read/Write Byte Data */
> +               I2C_FUNC_SMBUS_WORD_DATA |      /* Read/Write Word Data */
> +               I2C_FUNC_SMBUS_PROC_CALL |      /* Process Call */
> +               I2C_FUNC_SMBUS_BLOCK_DATA;      /* Read/Write Block Data */
> +}
> +
> +static int __devinit sis964_setup(struct pci_dev *sis964_dev)
> +{
> +       unsigned char b;
> +       struct pci_dev *dummy = NULL;
> +       int tmp = 0, i;
> +
> +       /* check for supported SiS devices */
> +       for (i = 0; supported[i] > 0 && dummy == NULL; i++)
> +               dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy);
> +
> +       if (dummy) {
> +               pci_dev_put(dummy);
> +       } else if (force) {
> +               dev_err(&sis964_dev->dev,
> +                       "WARNING: Can't detect SIS964 compatible device, but "
> +                       "loading because of force option enabled\n");
> +       } else {
> +               return -ENODEV;
> +       }
> +
> +
> +       /*
> +          Enable ACPI first , so we can accsess reg 74-75
> +          in acpi io space and read acpi base addr
> +       */
> +       if (pci_read_config_byte(sis964_dev, SIS964_BIOS_CTL_REG, &b)) {
> +               dev_err(&sis964_dev->dev, "Error: Can't read bios ctl reg\n");
> +               return -ENODEV;
> +       }
> +       /* if ACPI already enabled , do nothing */
> +       if (!(b & 0x80) &&
> +           pci_write_config_byte(sis964_dev, SIS964_BIOS_CTL_REG, b | 0x80)) {
> +               dev_err(&sis964_dev->dev, "Error: Can't enable ACPI\n");
> +               return -ENODEV;
> +       }
> +
> +       /* Determine the ACPI base address */
> +       if (pci_read_config_word(sis964_dev, SIS964_ACPI_BASE_REG,
> +                               &acpi_base)) {
> +               dev_err(&sis964_dev->dev,
> +                               "Error: Can't determine ACPI base address\n");
> +               return -ENODEV;
> +       }
> +
> +       dev_dbg(&sis964_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
> +
> +       tmp = acpi_check_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION,
> +                                  sis964_driver.name);
> +       if (tmp) {
> +               acpi_base = 0;
> +               return -ENODEV;
> +       }
> +
> +       /* Everything is happy, let's grab the memory and set things up. */
> +       if (!request_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION,
> +                           sis964_driver.name)) {
> +               dev_err(&sis964_dev->dev,
> +                       "SMBus registers 0x%04x-0x%04x already in use!\n",
> +                       acpi_base + SMB_STS, acpi_base + SMB_SAA);
> +               acpi_base = 0;
> +               return -ENODEV;
> +       }
> +
> +       return 0;
> +}
> +
> +
> +static const struct i2c_algorithm smbus_algorithm = {
> +       .smbus_xfer     = sis964_access,
> +       .functionality  = sis964_func,
> +};
> +
> +static struct i2c_adapter sis964_adapter = {
> +       .owner          = THIS_MODULE,
> +       .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
> +       .algo           = &smbus_algorithm,
> +};
> +
> +static DEFINE_PCI_DEVICE_TABLE(sis964_ids) = {
> +       { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) },
> +       { 0 }
> +};
> +
> +MODULE_DEVICE_TABLE(pci, sis964_ids);
> +
> +static int __devinit sis964_probe(struct pci_dev *dev,
> +                                       const struct pci_device_id *id)
> +{
> +       if (sis964_setup(dev)) {
> +               dev_err(&dev->dev,
> +                      "SIS964 comp. bus not detected, module not inserted.\n");
> +               return -ENODEV;
> +       }
> +
> +       /* set up the sysfs linkage to our parent device */
> +       sis964_adapter.dev.parent = &dev->dev;
> +
> +       snprintf(sis964_adapter.name, sizeof(sis964_adapter.name),
> +                "SMBus SIS964 adapter at %04xh", acpi_base + SMB_STS);
> +
> +       return i2c_add_adapter(&sis964_adapter);
> +}
> +
> +static void __devexit sis964_remove(struct pci_dev *dev)
> +{
> +       dev_dbg(&dev->dev, "sis964_remove");
> +
> +       if (acpi_base) {
> +               i2c_del_adapter(&sis964_adapter);
> +               release_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION);
> +               acpi_base = 0;
> +       }
> +}
> +
> +
> +static struct pci_driver sis964_driver = {
> +       .name           = "sis964_smbus",
> +       .id_table       = sis964_ids,
> +       .probe          = sis964_probe,
> +       .remove         = __devexit_p(sis964_remove),
> +};
> +
> +module_pci_driver(sis964_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Amaury Decrême <amaury.decreme@xxxxxxxxx>");
> +MODULE_DESCRIPTION("SiS964 SMBus driver");
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index ab741b0..0ffc982 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -699,6 +699,7 @@
>  #define PCI_DEVICE_ID_SI_961           0x0961
>  #define PCI_DEVICE_ID_SI_962           0x0962
>  #define PCI_DEVICE_ID_SI_963           0x0963
> +#define PCI_DEVICE_ID_SI_964           0x0964

Please read the comment at the top of this file; I don't think this
addition qualifies as something that should be added.

>  #define PCI_DEVICE_ID_SI_965           0x0965
>  #define PCI_DEVICE_ID_SI_966           0x0966
>  #define PCI_DEVICE_ID_SI_968           0x0968
> --
> 1.7.8.6
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux