Add support for input supply in DT parsing of node.
The input supply will be provided by the property
"vin-supply" in the regulator node.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
Changes from V1:
Based on discussion on patch
[PATCH 2/2] regulator: fixed: dt: support for input supply
that the supply name should be passed through desc->supply_name
in both DT and non-DT case.
Making the change to have this.
Changes from V2:
Add input_supply in the platform data and initialzing it with
"vin" in dt case. In non-dt case, this will be set through platform
data. Then making copy of this to the desc->supply_name to
pass the input supply regulator.
Changes from V3:
There was conflict in applying patch and so rebasing this in Mark's for-next
and sending.
.../bindings/regulator/fixed-regulator.txt | 2 ++
drivers/regulator/fixed.c | 19 ++++++++++++++++++-
include/linux/regulator/fixed.h | 2 ++
3 files changed, 22 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 2f5b6b1..4fae41d 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -10,6 +10,7 @@ Optional properties:
If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
+-vin-supply: Input supply name.
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -29,4 +30,5 @@ Example:
enable-active-high;
regulator-boot-on;
gpio-open-drain;
+ vin-supply = <&parent_reg>;
};
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 1a0b17e..185468c 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -102,6 +102,9 @@ of_get_fixed_voltage_config(struct device *dev)
if (of_find_property(np, "gpio-open-drain", NULL))
config->gpio_is_open_drain = true;
+ if (of_find_property(np, "vin-supply", NULL))
+ config->input_supply = "vin";
+
return config;
}
@@ -169,6 +172,17 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
drvdata->desc.enable_time = config->startup_delay;
+ if (config->input_supply) {
+ drvdata->desc.supply_name = kstrdup(config->input_supply,
+ GFP_KERNEL);
+ if (!drvdata->desc.supply_name) {
+ dev_err(&pdev->dev,
+ "Failed to allocate input supply\n");
+ ret = -ENOMEM;
+ goto err_name;
+ }
+ }
+
if (config->microvolts)
drvdata->desc.n_voltages = 1;
@@ -202,7 +216,7 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
- goto err_name;
+ goto err_input;
}
platform_set_drvdata(pdev, drvdata);
@@ -212,6 +226,8 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
return 0;
+err_input:
+ kfree(drvdata->desc.supply_name);
err_name:
kfree(drvdata->desc.name);
err:
@@ -223,6 +239,7 @@ static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
regulator_unregister(drvdata->dev);
+ kfree(drvdata->desc.supply_name);
kfree(drvdata->desc.name);
return 0;
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 680f24e..48918be 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -22,6 +22,7 @@ struct regulator_init_data;
/**
* struct fixed_voltage_config - fixed_voltage_config structure
* @supply_name: Name of the regulator supply
+ * @input_supply: Name of the input regulator supply
* @microvolts: Output voltage of regulator
* @gpio: GPIO to use for enable control
* set to -EINVAL if not used
@@ -46,6 +47,7 @@ struct regulator_init_data;
*/
struct fixed_voltage_config {
const char *supply_name;
+ const char *input_supply;
int microvolts;
int gpio;
unsigned startup_delay;
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
