Re: [PATCHES v2 1/2] Documentation: replace install commands with softdeps

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/16/2012 11:13 PM, Lucas De Marchi wrote:

> Install commands should not be used to specify soft dependencies among
> modules. When loading modules it's much better to have a softdep that
> modprobe knows what's being done than having to fork/exec another
> instance of modprobe to load the other module.
> 
> By using a softdep user has also an option to remove the dependencies
> when removing the module (and if its refcount dropped to 0)
> 
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxxxxxxx>


Applied, thanks.


> ---
> 
> v2: addressed comments from Takashi Iwai and split the patch in two. There were
> some changes to install commands that are better placed in a separate patch
> 
> 
>  Documentation/networking/bonding.txt    |    3 +--
>  Documentation/sound/oss/AudioExcelDSP16 |    4 ++--
>  Documentation/sound/oss/README.modules  |    2 +-
>  3 files changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
> index 080ad26..2d38eee 100644
> --- a/Documentation/networking/bonding.txt
> +++ b/Documentation/networking/bonding.txt
> @@ -1826,8 +1826,7 @@ an equivalent problem can occur.  In this case, the following can be
>  added to modprobe.conf (or modprobe.conf.local, as appropriate), as
>  follows (all on one line; it has been split here for clarity):
>  
> -install bonding /sbin/modprobe tg3; /sbin/modprobe e1000;
> -	/sbin/modprobe --ignore-install bonding
> +softdep bonding pre: tg3 e1000
>  
>  	This will, when loading the bonding module, rather than
>  performing the normal action, instead execute the provided command.
> diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16
> index e0dc064..30cfccc 100644
> --- a/Documentation/sound/oss/AudioExcelDSP16
> +++ b/Documentation/sound/oss/AudioExcelDSP16
> @@ -54,8 +54,8 @@ Loading MSS and OPL3 needs to pre load the aedsp16 module to set up correctly
>  the sound card. Installation dependencies must be written in the modprobe.conf
>  file:
>  
> -install ad1848 /sbin/modprobe aedsp16 && /sbin/modprobe -i ad1848
> -install opl3 /sbin/modprobe aedsp16 && /sbin/modprobe -i opl3
> +softdep ad1848 pre: aedsp16
> +softdep opl3 pre: aedsp16
>  
>  Then you must load the sound modules stack in this order:
>  sound -> aedsp16 -> [ ad1848, opl3 ]
> diff --git a/Documentation/sound/oss/README.modules b/Documentation/sound/oss/README.modules
> index e691d74..716615a 100644
> --- a/Documentation/sound/oss/README.modules
> +++ b/Documentation/sound/oss/README.modules
> @@ -36,7 +36,7 @@ options adlib_card io=0x388     # FM synthesizer
>   Alternatively, if you have compiled in kernel level ISAPnP support:
>  
>  alias char-major-14 sb
> -post-install sb /sbin/modprobe "-k" "adlib_card"
> +softdep sb post: adlib_card
>  options adlib_card io=0x388
>  
>    The effect of this is that the sound driver and all necessary bits and



-- 
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux