ADT7463 and ADT7468 optionally support VID5 instead of the standard +12V
measurement input. Use a boolean to identify the chip configuration instead of
hardcoding it several times.
Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
---
drivers/hwmon/lm85.c | 25 +++++++++++++------------
1 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index d2cc286..2253676 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -306,6 +306,8 @@ struct lm85_data {
const int *freq_map;
enum chips type;
+ bool has_vid5; /* true if VID5 is configured for ADT7463 or ADT7468 */
+
struct mutex update_lock;
int valid; /* !=0 if following fields are valid */
unsigned long last_reading; /* In jiffies */
@@ -420,8 +422,7 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
struct lm85_data *data = lm85_update_device(dev);
int vid;
- if ((data->type == adt7463 || data->type == adt7468) &&
- (data->vid & 0x80)) {
+ if (data->has_vid5) {
/* 6-pin VID (VRM 10) */
vid = vid_from_reg(data->vid & 0x3f, data->vrm);
} else {
@@ -1321,9 +1322,13 @@ static int lm85_probe(struct i2c_client *client,
/* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
as a sixth digital VID input rather than an analog input. */
- data->vid = lm85_read_value(client, LM85_REG_VID);
- if (!((data->type == adt7463 || data->type == adt7468) &&
- (data->vid & 0x80)))
+ if (data->type == adt7463 || data->type == adt7468) {
+ u8 vid = lm85_read_value(client, LM85_REG_VID);
+ if (vid & 0x80)
+ data->has_vid5 = true;
+ }
+
+ if (!data->has_vid5)
if ((err = sysfs_create_group(&client->dev.kobj,
&lm85_group_in4)))
goto err_remove_files;
@@ -1457,11 +1462,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
lm85_read_value(client, LM85_REG_FAN(i));
}
- if (!((data->type == adt7463 || data->type == adt7468) &&
- (data->vid & 0x80))) {
- data->in[4] = lm85_read_value(client,
- LM85_REG_IN(4));
- }
+ if (!data->has_vid5)
+ data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
if (data->type == adt7468)
data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
@@ -1528,8 +1530,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
lm85_read_value(client, LM85_REG_FAN_MIN(i));
}
- if (!((data->type == adt7463 || data->type == adt7468) &&
- (data->vid & 0x80))) {
+ if (!data->has_vid5) {
data->in_min[4] = lm85_read_value(client,
LM85_REG_IN_MIN(4));
data->in_max[4] = lm85_read_value(client,
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
