This file seeks to explain the nuances in various delays; many driver writers are not necessarily familiar with the various kernel timers, their shortfalls, and quirks. When faced with ndelay, udelay, mdelay, usleep, usleep_range, msleep, and msleep_interrubtible the question "How do I just wait 1 ms for my hardware to latch?" has the non-intuitive "best" answer: usleep_range(1000,2000) This patch is followed by a series of checkpatch additions that seek to help kernel hackers pick the best delay. Signed-off-by: Patrick Pannuto <ppannuto@xxxxxxxxxxxxxx> --- Documentation/timers/delays.txt | 97 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 97 insertions(+), 0 deletions(-) create mode 100644 Documentation/timers/delays.txt diff --git a/Documentation/timers/delays.txt b/Documentation/timers/delays.txt new file mode 100644 index 0000000..12fcb7e --- /dev/null +++ b/Documentation/timers/delays.txt @@ -0,0 +1,97 @@ +delays - Information on the various kernel delay / sleep mechanisms +------------------------------------------------------------------- + +This document seeks to answer the common question: "What is the +RightWay (TM) to insert a delay?" + +This question is most often faced by driver writers who have to +deal with hardware delays and who may not be the most initimately +familiar with the inner workings of the Linux Kernel. + + +Inserting Delays +---------------- + +The first, and most important, question you need to ask is "Is my +code in an atomic context?" This should be followed closely by "Does +it really need to delay in atomic context?" If so... + +ATOMIC CONTEXT: + You must use the *delay family of functions. These + functions use the jiffie estimation of clock speed + and will busy wait for enough loop cycles to achieve + the desired delay: + + ndelay(unsigned long nsecs) + udelay(unsigned long usecs) + mdelay(unsgined long msecs) + + udelay is the generally preferred API; ndelay-level + precision may not actually exist on many non-PC devices. + + mdelay is macro wrapper around udelay, to account for + possible overflow when passing large arguments to udelay. + In general, use of mdelay is discouraged. + +NON-ATOMIC CONTEXT: + You should use the *sleep[_range] family of functions. + There are a few more options here, while any of them may + work correctly, using the "right" sleep function will + help the scheduler, power management, and just make your + driver better :) + + -- Backed by busy-wait loop: + udelay(unsigned long usecs) + -- Backed by hrtimers: + usleep(unsigned long usecs) + usleep_range(unsigned long min, unsigned long max) + -- Backed by jiffies / legacy_timers + msleep(unsigned long msecs) + msleep_interruptible(unsigned long msecs) + + Unlike the *delay family, the underlying mechanism + driving each of these calls varies, thus there are + quirks you should be aware of. + + + SLEEPING FOR "A FEW" USECS ( < ~10us? ): + * Use udelay + + - Why not usleep? + On slower systems, (embedded, OR perhaps a speed- + stepped PC!) the overhead of setting up the hrtimers + for usleep *may* not be worth it. Such an evaluation + will obviously depend on your specific situation, but + it is something to be aware of. + + SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms): + * Use usleep_range + + - Why not msleep for (1ms - 20ms)? + Explained originally here: + http://lkml.org/lkml/2007/8/3/250 + msleep(1~20) may not do what the caller intends, and + will often sleep longer (~20 ms actual sleep for any + value given in the 1~20ms range). In many cases this + is not the desired behavior. + + - usleep vs usleep_range: + Since usleep is built on top of high-resolution timers, + you will trigger an interrupt almost *exactly* when your + sleep expires; normally, sleeps (by their nature) do not + need this kind of precision. The *much* friendlier + usleep_range allows the kernel to complete your sleep + any time in the given range, likely when some other + interrupt has already woken up the kernel for some other + reason. + + SLEEPING FOR LARGER MSECS ( 10ms+ ) + * Use msleep or possibly msleep_interruptible + + - What's the difference? + msleep sets the current task to TASK_UNINTERRUPTIBLE + whereas msleep_interruptible sets the current task to + TASK_INTERRUBTIBLE before scheduling the sleep. In + short, the difference is whether the sleep can be ended + early by a signal. In general, just use msleep unless + you know you have a need for the interruptible varient. -- 1.7.2 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html