Documentation/isdn/README.hfc-pci:19: ERROR: trailing whitespace Documentation/isdn/README.hfc-pci:25: ERROR: trailing whitespace Documentation/isdn/README.hfc-pci:27: ERROR: trailing whitespace Documentation/isdn/README.hfc-pci:32: ERROR: trailing whitespace Documentation/isdn/README.hfc-pci:34: ERROR: trailing whitespace Documentation/isdn/README.hfc-pci:36: ERROR: trailing whitespace Signed-off-by: Andrea Gelmini <andrea.gelmini@xxxxxxxxx> --- Documentation/isdn/README.hfc-pci | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/isdn/README.hfc-pci b/Documentation/isdn/README.hfc-pci index e8a4ef0..a61227f 100644 --- a/Documentation/isdn/README.hfc-pci +++ b/Documentation/isdn/README.hfc-pci @@ -16,24 +16,24 @@ And then: hisaxctrl <driver/cardname> 12 1 -This enables the echo mode. If Hex logging is activated the isdnctrlx +This enables the echo mode. If Hex logging is activated the isdnctrlx devices show a output with a line beginning of HEX: for the providers exchange and ECHO: for isdn devices sending to the provider. If more than one HFC-PCI cards are installed, a specific card may be selected at the hisax module load command line. Supply the load command with the desired -IO-address of the desired card. +IO-address of the desired card. Example: -There tree cards installed in your machine at IO-base addresses 0xd000, 0xd400 +There tree cards installed in your machine at IO-base addresses 0xd000, 0xd400 and 0xdc00 If you want to use the card at 0xd400 standalone you should supply the insmod or depmod with type=35 io=0xd400. If you want to use all three cards, but the order needs to be at 0xdc00,0xd400, -0xd000 you may give the parameters type=35,35,35 io=0xdc00,0xd400,0xd00 +0xd000 you may give the parameters type=35,35,35 io=0xdc00,0xd400,0xd00 Then the desired card will be the initialised in the desired order. -If the io parameter is used the io addresses of all used cards should be +If the io parameter is used the io addresses of all used cards should be supplied else the parameter is assumed 0 and a auto search for a free card is -invoked which may not give the wanted result. +invoked which may not give the wanted result. Comments and reports to werner@xxxxxxxxxxxxx or werner@xxxxxxxxxxxxxxxxxxx -- 1.7.1.251.gf80a2 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html