Documentation/isdn/README.sc:3: ERROR: trailing whitespace Documentation/isdn/README.sc:30: ERROR: trailing whitespace Documentation/isdn/README.sc:106: ERROR: trailing whitespace Documentation/isdn/README.sc:120: ERROR: trailing whitespace Documentation/isdn/README.sc:123: ERROR: trailing whitespace Documentation/isdn/README.sc:143: ERROR: trailing whitespace Documentation/isdn/README.sc:162: ERROR: trailing whitespace Documentation/isdn/README.sc:165: ERROR: trailing whitespace Documentation/isdn/README.sc:166: ERROR: trailing whitespace Documentation/isdn/README.sc:168: ERROR: trailing whitespace Documentation/isdn/README.sc:187: ERROR: trailing whitespace Documentation/isdn/README.sc:188: ERROR: trailing whitespace Documentation/isdn/README.sc:189: ERROR: trailing whitespace Documentation/isdn/README.sc:192: ERROR: trailing whitespace Documentation/isdn/README.sc:196: ERROR: trailing whitespace Documentation/isdn/README.sc:201: ERROR: trailing whitespace Documentation/isdn/README.sc:202: ERROR: trailing whitespace Documentation/isdn/README.sc:207: ERROR: trailing whitespace Documentation/isdn/README.sc:212: ERROR: trailing whitespace Documentation/isdn/README.sc:213: ERROR: trailing whitespace Documentation/isdn/README.sc:214: ERROR: trailing whitespace Documentation/isdn/README.sc:215: ERROR: trailing whitespace Documentation/isdn/README.sc:217: ERROR: trailing whitespace Documentation/isdn/README.sc:218: ERROR: trailing whitespace Documentation/isdn/README.sc:219: ERROR: trailing whitespace Documentation/isdn/README.sc:220: ERROR: trailing whitespace Documentation/isdn/README.sc:224: ERROR: trailing whitespace Documentation/isdn/README.sc:230: ERROR: trailing whitespace Documentation/isdn/README.sc:237: ERROR: trailing whitespace Documentation/isdn/README.sc:238: ERROR: trailing whitespace Documentation/isdn/README.sc:239: ERROR: trailing whitespace Documentation/isdn/README.sc:240: ERROR: trailing whitespace Documentation/isdn/README.sc:241: ERROR: trailing whitespace Documentation/isdn/README.sc:244: ERROR: trailing whitespace Documentation/isdn/README.sc:247: ERROR: trailing whitespace Documentation/isdn/README.sc:252: ERROR: trailing whitespace Documentation/isdn/README.sc:255: ERROR: trailing whitespace Documentation/isdn/README.sc:264: ERROR: trailing whitespace Documentation/isdn/README.sc:265: ERROR: trailing whitespace Documentation/isdn/README.sc:268: ERROR: trailing whitespace Signed-off-by: Andrea Gelmini <andrea.gelmini@xxxxxxxxx> --- Documentation/isdn/README.sc | 80 +++++++++++++++++++++--------------------- 1 files changed, 40 insertions(+), 40 deletions(-) diff --git a/Documentation/isdn/README.sc b/Documentation/isdn/README.sc index 1153cd9..f9641b8 100644 --- a/Documentation/isdn/README.sc +++ b/Documentation/isdn/README.sc @@ -1,6 +1,6 @@ Welcome to Beta Release 2 of the combination ISDN driver for SpellCaster's ISA ISDN adapters. Please note this release 2 includes support for the -DataCommute/BRI and TeleCommute/BRI adapters only and any other use is +DataCommute/BRI and TeleCommute/BRI adapters only and any other use is guaranteed to fail. If you have a DataCommute/PRI installed in the test computer, we recommend removing it as it will be detected but will not be usable. To see what we have done to Beta Release 2, see section 3. @@ -27,7 +27,7 @@ TABLE OF CONTENTS 1.2 What is different between this driver and previous drivers? 1.3 How do I setup my system with the correct software to use this driver release? - + 2. Basic Operations 2.1 Unpacking and installing the driver 2.2 Read the man pages!!! @@ -103,7 +103,7 @@ must ensure that the following software is installed, configured and running: - The latest modules package (modules-2.0.0.tar.gz) from ftp://sunsite.unc.edu/pub/Linux/kernel/modules-2.0.0.tar.gz - - The ISDN4Linux tools available from + - The ISDN4Linux tools available from ftp://ftp.franken.de/pub/isdn4linux/v2.0/isdn4k-utils-2.0.tar.gz This package may fail to compile for you so you can alternatively get a pre-compiled version from @@ -117,10 +117,10 @@ must ensure that the following software is installed, configured and running: 1. As root, create a directory in a convenient place. We suggest /usr/src/spellcaster. - + 2. Unpack the archive with : tar xzf sc-n.nn.tar.gz -C /usr/src/spellcaster - + 3. Change directory to /usr/src/spellcaster 4. Read the README and RELNOTES files. @@ -140,7 +140,7 @@ you can specify but you shouldn't need to use any unless this doesn't work. Make sure the driver loaded and detected all of the adapters by typing 'dmesg'. -The driver can be configured so that it is loaded upon startup. To do this, +The driver can be configured so that it is loaded upon startup. To do this, edit the file "/etc/modules/'uname -f'/'uname -v'" and insert the driver name "sc" into this file. @@ -159,13 +159,13 @@ If you get a message that says 'initialization of sc failed', then the driver failed to detect an adapter or failed to find resources needed such as a free IRQ line or shared memory segment. If you are sure there are free resources available, use the insmod options detailed in sc(4) to override -the probing function. +the probing function. Upon testing, the following problem was noted, the driver would load without -problems, but the board would not respond beyond that point. When a check was -done with 'cat /proc/interrupts' the interrupt count for sc was 0. In the event +problems, but the board would not respond beyond that point. When a check was +done with 'cat /proc/interrupts' the interrupt count for sc was 0. In the event of this problem, change the BIOS settings so that the interrupts in question are -reserved for ISA use only. +reserved for ISA use only. 2.6 How to setup ISDN4Linux with the driver @@ -184,75 +184,75 @@ A) 10 steps to the establishment of a basic HDLC connection ----------------------------------------------------------- - please open the isdn-hdlc file in the examples directory and follow along... - - This file is a script used to configure a BRI ISDN TA to establish a - basic HDLC connection between its two channels. Two network + + This file is a script used to configure a BRI ISDN TA to establish a + basic HDLC connection between its two channels. Two network interfaces are created and two routes added between the channels. - i) using the isdnctrl utility, add an interface with "addif" and + i) using the isdnctrl utility, add an interface with "addif" and name it "isdn0" ii) add the outgoing and inbound telephone numbers iii) set the Layer 2 protocol to hdlc - iv) set the eaz of the interface to be the phone number of that + iv) set the eaz of the interface to be the phone number of that specific channel v) to turn the callback features off, set the callback to "off" and the callback delay (cbdelay) to 0. vi) the hangup timeout can be set to a specified number of seconds - vii) the hangup upon incoming call can be set on or off - viii) use the ifconfig command to bring up the network interface with + vii) the hangup upon incoming call can be set on or off + viii) use the ifconfig command to bring up the network interface with a specific IP address and point to point address ix) add a route to the IP address through the isdn0 interface x) a ping should result in the establishment of the connection - + B) Establishment of a PPP connection ------------------------------------ - please open the isdn-ppp file in the examples directory and follow along... - - This file is a script used to configure a BRI ISDN TA to establish a - PPP connection between the two channels. The file is almost - identical to the HDLC connection example except that the packet + + This file is a script used to configure a BRI ISDN TA to establish a + PPP connection between the two channels. The file is almost + identical to the HDLC connection example except that the packet encapsulation type has to be set. - - use the same procedure as in the HDLC connection from steps i) to - iii) then, after the Layer 2 protocol is set, set the encapsulation - "encap" to syncppp. With this done, the rest of the steps, iv) to x) + + use the same procedure as in the HDLC connection from steps i) to + iii) then, after the Layer 2 protocol is set, set the encapsulation + "encap" to syncppp. With this done, the rest of the steps, iv) to x) can be followed from above. Then, the ipppd (ippp daemon) must be setup: - + xi) use the ipppd function found in /sbin/ipppd to set the following: xii) take out (minus) VJ compression and bsd compression xiii) set the mru size to 2000 xiv) link the two /dev interfaces to the daemon -NOTE: A "*" in the inbound telephone number specifies that a call can be +NOTE: A "*" in the inbound telephone number specifies that a call can be accepted on any number. C) Establishment of a MLPPP connection -------------------------------------- - please open the isdn-mppp file in the examples directory and follow along... - - This file is a script used to configure a BRI ISDN TA to accept a - Multi Link PPP connection. - - i) using the isdnctrl utility, add an interface with "addif" and + + This file is a script used to configure a BRI ISDN TA to accept a + Multi Link PPP connection. + + i) using the isdnctrl utility, add an interface with "addif" and name it "ippp0" ii) add the inbound telephone number - iii) set the Layer 2 protocol to hdlc and the Layer 3 protocol to + iii) set the Layer 2 protocol to hdlc and the Layer 3 protocol to trans (transparent) iv) set the packet encapsulation to syncppp - v) set the eaz of the interface to be the phone number of that + v) set the eaz of the interface to be the phone number of that specific channel vi) to turn the callback features off, set the callback to "off" and the callback delay (cbdelay) to 0. vi) the hangup timeout can be set to a specified number of seconds - vii) the hangup upon incoming call can be set on or off + vii) the hangup upon incoming call can be set on or off viii) add a slave interface and name it "ippp32" for example ix) set the similar parameters for the ippp32 interface - x) use the ifconfig command to bring-up the ippp0 interface with a + x) use the ifconfig command to bring-up the ippp0 interface with a specific IP address and point to point address xi) add a route to the IP address through the ippp0 interface xii) use the ipppd function found in /sbin/ipppd to set the following: @@ -261,11 +261,11 @@ C) Establishment of a MLPPP connection xv) add (+) the multi-link function "+mp" xvi) link the two /dev interfaces to the daemon -NOTE: To use the MLPPP connection to dial OUT to a MLPPP connection, change -the inbound telephone numbers to the outgoing telephone numbers of the MLPPP +NOTE: To use the MLPPP connection to dial OUT to a MLPPP connection, change +the inbound telephone numbers to the outgoing telephone numbers of the MLPPP host. - + 3. Beta Change Summaries and Miscellaneous Notes ------------------------------------------------ When using the "scctrl" utility to upload firmware revisions on the board, -- 1.7.1.251.gf80a2 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html