On 09/03/2009 07:50 PM, Krzysztof Halasa wrote:
Ric Wheeler<rwheeler@xxxxxxxxxx> writes:
The whole thread above is about software MD using commodity drives
(S-ATA or SAS) without battery backed write cache.
Yes. However, you mentioned external RAID arrays disable disk caches.
That's why I asked if they are using SATA or SCSI/etc. disks, and if
they have battery-backed cache.
Sorry for the confusion - they disable the write caches on the component
drives normally, but have their own write cache which is not disabled in
most cases.
Also, when you enable the write cache (MD or not) you are buffering
multiple MB's of data that can go away on power loss. Far greater
(10x) the exposure that the partial RAID rewrite case worries about.
The cache is flushed with working barriers. I guess it should be
superior to disabled WB cache, in both performance and expected disk
lifetime.
True - barriers (especially on big, slow s-ata drives) usually give you
an overall win. SAS drives it seems to make less of an impact, but then
you always need to benchmark your workload on anything to get the only
numbers that really matter :-)
ric
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html