Pavel Machek wrote:
Lets say you are writing to the (healthy) RAID5 and have a powerfail. So now data blocks do not correspond to the parity block. You don't yet have the corruption, but you already have a problem. If you get a disk failing at this point, you'll get corruption.
Not necessarily. Say you wrote out the entire stripe in a 5 disk RAID 5 array, but only 3 data blocks and the parity block got written out before power failure. If the disk with the 4th (unwritten) data block were to fail and get taken out of the RAID 5 array, the degradation of the array could actually undo your data corruption. With RAID 5 and incomplete writes, you just don't know. This kind of thing could go wrong at any level in the system, with any kind of RAID 5 setup. Of course, on a single disk system without RAID you can still get incomplete writes, for the exact same reasons. RAID 5 does not make things worse. It will protect your data against certain failure modes, but not against others. With or without RAID, you still need to make backups. -- All rights reversed. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html