Re: [PATCH] arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For csky part

Acked-by: Guo Ren <guoren@xxxxxxxxxx>

On Mon, Aug 15, 2022 at 10:40 PM Zi Yan <zi.yan@xxxxxxxx> wrote:
>
> From: Zi Yan <ziy@xxxxxxxxxx>
>
> This Kconfig option is used by individual arch to set its desired
> MAX_ORDER. Rename it to reflect its actual use.
>
> Acked-by: Mike Rapoport <rppt@xxxxxxxxxxxxx>
> Signed-off-by: Zi Yan <ziy@xxxxxxxxxx>
> Cc: Vineet Gupta <vgupta@xxxxxxxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Taichi Sugaya <sugaya.taichi@xxxxxxxxxxxxx>
> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> Cc: Qin Jian <qinjian@xxxxxxxxxxx>
> Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
> Cc: Guo Ren <guoren@xxxxxxxxxx>
> Cc: Huacai Chen <chenhuacai@xxxxxxxxxx>
> Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
> Cc: Dinh Nguyen <dinguyen@xxxxxxxxxx>
> Cc: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
> Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
> Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
> Cc: Chris Zankel <chris@xxxxxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Cc: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
> Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-oxnas@xxxxxxxxx
> Cc: linux-csky@xxxxxxxxxxxxxxx
> Cc: linux-ia64@xxxxxxxxxxxxxxx
> Cc: loongarch@xxxxxxxxxxxxxxx
> Cc: linux-m68k@xxxxxxxxxxxxxxxxxxxx
> Cc: linux-mips@xxxxxxxxxxxxxxx
> Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
> Cc: linux-sh@xxxxxxxxxxxxxxx
> Cc: sparclinux@xxxxxxxxxxxxxxx
> Cc: linux-xtensa@xxxxxxxxxxxxxxxx
> Cc: linux-mm@xxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
>  arch/arc/Kconfig                             | 2 +-
>  arch/arm/Kconfig                             | 2 +-
>  arch/arm/configs/imx_v6_v7_defconfig         | 2 +-
>  arch/arm/configs/milbeaut_m10v_defconfig     | 2 +-
>  arch/arm/configs/oxnas_v6_defconfig          | 2 +-
>  arch/arm/configs/pxa_defconfig               | 2 +-
>  arch/arm/configs/sama7_defconfig             | 2 +-
>  arch/arm/configs/sp7021_defconfig            | 2 +-
>  arch/arm64/Kconfig                           | 2 +-
>  arch/csky/Kconfig                            | 2 +-
>  arch/ia64/Kconfig                            | 2 +-
>  arch/ia64/include/asm/sparsemem.h            | 6 +++---
>  arch/loongarch/Kconfig                       | 2 +-
>  arch/m68k/Kconfig.cpu                        | 2 +-
>  arch/mips/Kconfig                            | 2 +-
>  arch/nios2/Kconfig                           | 2 +-
>  arch/powerpc/Kconfig                         | 2 +-
>  arch/powerpc/configs/85xx/ge_imp3a_defconfig | 2 +-
>  arch/powerpc/configs/fsl-emb-nonhw.config    | 2 +-
>  arch/sh/configs/ecovec24_defconfig           | 2 +-
>  arch/sh/mm/Kconfig                           | 2 +-
>  arch/sparc/Kconfig                           | 2 +-
>  arch/xtensa/Kconfig                          | 2 +-
>  include/linux/mmzone.h                       | 4 ++--
>  24 files changed, 27 insertions(+), 27 deletions(-)
>
> diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
> index 9e3653253ef2..d9a13ccf89a3 100644
> --- a/arch/arc/Kconfig
> +++ b/arch/arc/Kconfig
> @@ -554,7 +554,7 @@ config ARC_BUILTIN_DTB_NAME
>
>  endmenu         # "ARC Architecture Configuration"
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         default "12" if ARC_HUGEPAGE_16M
>         default "11"
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 87badeae3181..e6c8ee56ac52 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1434,7 +1434,7 @@ config ARM_MODULE_PLTS
>           Disabling this is usually safe for small single-platform
>           configurations. If unsure, say y.
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         default "12" if SOC_AM33XX
>         default "9" if SA1111
> diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> index 01012537a9b9..fb283059daa0 100644
> --- a/arch/arm/configs/imx_v6_v7_defconfig
> +++ b/arch/arm/configs/imx_v6_v7_defconfig
> @@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y
>  CONFIG_SMP=y
>  CONFIG_ARM_PSCI=y
>  CONFIG_HIGHMEM=y
> -CONFIG_FORCE_MAX_ZONEORDER=14
> +CONFIG_ARCH_FORCE_MAX_ORDER=14
>  CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
>  CONFIG_KEXEC=y
>  CONFIG_CPU_FREQ=y
> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
> index 58810e98de3d..8620061e19a8 100644
> --- a/arch/arm/configs/milbeaut_m10v_defconfig
> +++ b/arch/arm/configs/milbeaut_m10v_defconfig
> @@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
>  # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
>  # CONFIG_ARM_PATCH_IDIV is not set
>  CONFIG_HIGHMEM=y
> -CONFIG_FORCE_MAX_ZONEORDER=12
> +CONFIG_ARCH_FORCE_MAX_ORDER=12
>  CONFIG_SECCOMP=y
>  CONFIG_KEXEC=y
>  CONFIG_EFI=y
> diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
> index 600f78b363dd..5c163a9d1429 100644
> --- a/arch/arm/configs/oxnas_v6_defconfig
> +++ b/arch/arm/configs/oxnas_v6_defconfig
> @@ -12,7 +12,7 @@ CONFIG_ARCH_OXNAS=y
>  CONFIG_MACH_OX820=y
>  CONFIG_SMP=y
>  CONFIG_NR_CPUS=16
> -CONFIG_FORCE_MAX_ZONEORDER=12
> +CONFIG_ARCH_FORCE_MAX_ORDER=12
>  CONFIG_SECCOMP=y
>  CONFIG_ARM_APPENDED_DTB=y
>  CONFIG_ARM_ATAG_DTB_COMPAT=y
> diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
> index 104a45722799..ce3f4ed50498 100644
> --- a/arch/arm/configs/pxa_defconfig
> +++ b/arch/arm/configs/pxa_defconfig
> @@ -21,7 +21,7 @@ CONFIG_MACH_AKITA=y
>  CONFIG_MACH_BORZOI=y
>  CONFIG_PXA_SYSTEMS_CPLDS=y
>  CONFIG_AEABI=y
> -CONFIG_FORCE_MAX_ZONEORDER=9
> +CONFIG_ARCH_FORCE_MAX_ORDER=9
>  CONFIG_CMDLINE="root=/dev/ram0 ro"
>  CONFIG_KEXEC=y
>  CONFIG_CPU_FREQ=y
> diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
> index 0384030d8b25..8b2cf6ddd568 100644
> --- a/arch/arm/configs/sama7_defconfig
> +++ b/arch/arm/configs/sama7_defconfig
> @@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y
>  # CONFIG_CACHE_L2X0 is not set
>  # CONFIG_ARM_PATCH_IDIV is not set
>  # CONFIG_CPU_SW_DOMAIN_PAN is not set
> -CONFIG_FORCE_MAX_ZONEORDER=15
> +CONFIG_ARCH_FORCE_MAX_ORDER=15
>  CONFIG_UACCESS_WITH_MEMCPY=y
>  # CONFIG_ATAGS is not set
>  CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
> diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig
> index 703b9aaa40f0..151ca8c47373 100644
> --- a/arch/arm/configs/sp7021_defconfig
> +++ b/arch/arm/configs/sp7021_defconfig
> @@ -18,7 +18,7 @@ CONFIG_ARCH_SUNPLUS=y
>  # CONFIG_VDSO is not set
>  CONFIG_SMP=y
>  CONFIG_THUMB2_KERNEL=y
> -CONFIG_FORCE_MAX_ZONEORDER=12
> +CONFIG_ARCH_FORCE_MAX_ORDER=12
>  CONFIG_VFP=y
>  CONFIG_NEON=y
>  CONFIG_MODULES=y
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 571cc234d0b3..c6fcd8746f60 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -1401,7 +1401,7 @@ config XEN
>         help
>           Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int
>         default "14" if ARM64_64K_PAGES
>         default "12" if ARM64_16K_PAGES
> diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
> index 3cbc2dc62baf..adee6ab36862 100644
> --- a/arch/csky/Kconfig
> +++ b/arch/csky/Kconfig
> @@ -332,7 +332,7 @@ config HIGHMEM
>         select KMAP_LOCAL
>         default y
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         default "11"
>
> diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> index 26ac8ea15a9e..c6e06cdc738f 100644
> --- a/arch/ia64/Kconfig
> +++ b/arch/ia64/Kconfig
> @@ -200,7 +200,7 @@ config IA64_CYCLONE
>           Say Y here to enable support for IBM EXA Cyclone time source.
>           If you're unsure, answer N.
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
>         range 11 17  if !HUGETLB_PAGE
>         default "17" if HUGETLB_PAGE
> diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
> index 42ed5248fae9..84e8ce387b69 100644
> --- a/arch/ia64/include/asm/sparsemem.h
> +++ b/arch/ia64/include/asm/sparsemem.h
> @@ -11,10 +11,10 @@
>
>  #define SECTION_SIZE_BITS      (30)
>  #define MAX_PHYSMEM_BITS       (50)
> -#ifdef CONFIG_FORCE_MAX_ZONEORDER
> -#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
> +#ifdef CONFIG_ARCH_FORCE_MAX_ORDER
> +#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
>  #undef SECTION_SIZE_BITS
> -#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
> +#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT)
>  #endif
>  #endif
>
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index 4abc9a28aba4..b5b19eea0e3e 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -369,7 +369,7 @@ config NODES_SHIFT
>         default "6"
>         depends on NUMA
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         range 14 64 if PAGE_SIZE_64KB
>         default "14" if PAGE_SIZE_64KB
> diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
> index e0e9e31339c1..3b2f39508524 100644
> --- a/arch/m68k/Kconfig.cpu
> +++ b/arch/m68k/Kconfig.cpu
> @@ -399,7 +399,7 @@ config SINGLE_MEMORY_CHUNK
>           order" to save memory that could be wasted for unused memory map.
>           Say N if not sure.
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order" if ADVANCED
>         depends on !SINGLE_MEMORY_CHUNK
>         default "11"
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index ec21f8999249..70d28976a40d 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -2140,7 +2140,7 @@ config PAGE_SIZE_64KB
>
>  endchoice
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
>         default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
> diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
> index 4167f1eb4cd8..a582f72104f3 100644
> --- a/arch/nios2/Kconfig
> +++ b/arch/nios2/Kconfig
> @@ -44,7 +44,7 @@ menu "Kernel features"
>
>  source "kernel/Kconfig.hz"
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         range 9 20
>         default "11"
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 4c466acdc70d..39d71d7701bd 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -845,7 +845,7 @@ config DATA_SHIFT
>           in that case. If PIN_TLB is selected, it must be aligned to 8M as
>           8M pages will be pinned.
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         range 8 9 if PPC64 && PPC_64K_PAGES
>         default "9" if PPC64 && PPC_64K_PAGES
> diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
> index f29c166998af..e7672c186325 100644
> --- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig
> +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
> @@ -30,7 +30,7 @@ CONFIG_PREEMPT=y
>  # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
>  CONFIG_BINFMT_MISC=m
>  CONFIG_MATH_EMULATION=y
> -CONFIG_FORCE_MAX_ZONEORDER=17
> +CONFIG_ARCH_FORCE_MAX_ORDER=17
>  CONFIG_PCI=y
>  CONFIG_PCIEPORTBUS=y
>  CONFIG_PCI_MSI=y
> diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config
> index f14c6dbd7346..ab8a8c4530d9 100644
> --- a/arch/powerpc/configs/fsl-emb-nonhw.config
> +++ b/arch/powerpc/configs/fsl-emb-nonhw.config
> @@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y
>  CONFIG_FONT_8x16=y
>  CONFIG_FONT_8x8=y
>  CONFIG_FONTS=y
> -CONFIG_FORCE_MAX_ZONEORDER=13
> +CONFIG_ARCH_FORCE_MAX_ORDER=13
>  CONFIG_FRAMEBUFFER_CONSOLE=y
>  CONFIG_FRAME_WARN=1024
>  CONFIG_FTL=y
> diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
> index e699e2e04128..b52e14ccb450 100644
> --- a/arch/sh/configs/ecovec24_defconfig
> +++ b/arch/sh/configs/ecovec24_defconfig
> @@ -8,7 +8,7 @@ CONFIG_MODULES=y
>  CONFIG_MODULE_UNLOAD=y
>  # CONFIG_BLK_DEV_BSG is not set
>  CONFIG_CPU_SUBTYPE_SH7724=y
> -CONFIG_FORCE_MAX_ZONEORDER=12
> +CONFIG_ARCH_FORCE_MAX_ORDER=12
>  CONFIG_MEMORY_SIZE=0x10000000
>  CONFIG_FLATMEM_MANUAL=y
>  CONFIG_SH_ECOVEC=y
> diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
> index ba569cfb4368..411fdc0901f7 100644
> --- a/arch/sh/mm/Kconfig
> +++ b/arch/sh/mm/Kconfig
> @@ -18,7 +18,7 @@ config PAGE_OFFSET
>         default "0x80000000" if MMU
>         default "0x00000000"
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         range 9 64 if PAGE_SIZE_16KB
>         default "9" if PAGE_SIZE_16KB
> diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
> index 1c852bb530ec..4d3d1af90d52 100644
> --- a/arch/sparc/Kconfig
> +++ b/arch/sparc/Kconfig
> @@ -269,7 +269,7 @@ config ARCH_SPARSEMEM_ENABLE
>  config ARCH_SPARSEMEM_DEFAULT
>         def_bool y if SPARC64
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         default "13"
>         help
> diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
> index 12ac277282ba..bcb0c5d2abc2 100644
> --- a/arch/xtensa/Kconfig
> +++ b/arch/xtensa/Kconfig
> @@ -771,7 +771,7 @@ config HIGHMEM
>
>           If unsure, say Y.
>
> -config FORCE_MAX_ZONEORDER
> +config ARCH_FORCE_MAX_ORDER
>         int "Maximum zone order"
>         default "11"
>         help
> diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
> index 025754b0bc09..fd61347b4b1f 100644
> --- a/include/linux/mmzone.h
> +++ b/include/linux/mmzone.h
> @@ -24,10 +24,10 @@
>  #include <asm/page.h>
>
>  /* Free memory management - zoned buddy allocator.  */
> -#ifndef CONFIG_FORCE_MAX_ZONEORDER
> +#ifndef CONFIG_ARCH_FORCE_MAX_ORDER
>  #define MAX_ORDER 11
>  #else
> -#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
> +#define MAX_ORDER CONFIG_ARCH_FORCE_MAX_ORDER
>  #endif
>  #define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
>
> --
> 2.35.1
>


-- 
Best Regards
 Guo Ren



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux