Hi Jeffrey, On Thu, Aug 29, 2024 at 11:01 AM Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx> wrote: > Interesting, I haven't seen this in my testing. I'll go swing back and > try to figure out why. > > For future reference, I'm still supporting Amberwing/QDF2400. > Addressing emails to me is a good way to get my attention. I also see an unrelated error when booting the Qualcomm Amberwing with 6.11.0-rc5: [ 14.159483] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.1.auto: error -EINVAL: invalid resource (null) [ 14.167076] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.1.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.177707] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.2.auto: error -EINVAL: invalid resource (null) [ 14.185557] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.2.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 ... I spent 20 minutes troubleshooting this in the arm smmu driver, however I didn't see anything obvious. I attached the full dmesg. Ernesto: Are you seeing that on your Amberwing? Brian
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x510fc001] [ 0.000000] Linux version 6.11.0-rc5-00150-g2b64426789c5 (masneyb@x1) (aarch64-linux-gnu-gcc (GCC) 13.2.1 20230728 (Red Hat Cross 13.2.1-1), GNU ld version 2.40-3.fc39) #16 SMP PREEMPT Thu Sep 5 19:29:07 EDT 2024 [ 0.000000] KASLR disabled on command line [ 0.000000] efi: EFI v2.6 by American Megatrends [ 0.000000] efi: SMBIOS 3.0=0xdfcae98 ACPI 2.0=0x3540000 ESRT=0xb3c9318 MEMATTR=0xb3c7018 RNG=0x35a0018 MEMRESERVE=0x89f1e18 [ 0.000000] random: crng init done [ 0.000000] esrt: Reserving ESRT space from 0x000000000b3c9318 to 0x000000000b3c9418. [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000003540000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x0000000003540028 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000035400D0 000114 (v06 QCOM QDF2400 00000000 INTL 20160930) [ 0.000000] ACPI: DSDT 0x00000000035401E8 03453E (v02 QCOM QDF2400 00000004 INTL 20160930) [ 0.000000] ACPI: FACS 0x00000000082E0040 000040 [ 0.000000] ACPI: FIDT 0x0000000003574728 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: PPTT 0x00000000035747C8 000806 (v01 QCOM QDF2400 00000003 INTL 20150515) [ 0.000000] ACPI: APIC 0x0000000003574FD0 000ED0 (v04 QCOM QDF2400 00000001 INTL 20160930) [ 0.000000] ACPI: BERT 0x0000000003575EA0 000030 (v01 QCOM QDF2400 00000001 INTL 20160930) [ 0.000000] ACPI: EINJ 0x0000000003575ED0 000150 (v01 QCOM QDF2400 00000001 INTL 20160930) [ 0.000000] ACPI: GTDT 0x0000000003576020 00007C (v02 QCOM QDF2400 00000001 INTL 20160930) [ 0.000000] ACPI: PCCT 0x00000000035760A0 0000AC (v01 QCOM QDF2400 00000001 INTL 20160930) [ 0.000000] ACPI: SPMI 0x0000000003576150 000041 (v04 QCOM QDF2400 00000000 INTL 20160930) [ 0.000000] ACPI: DBG2 0x0000000003576198 000072 (v00 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: IORT 0x0000000003576210 000DE8 (v00 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: TPM2 0x0000000003576FF8 000040 (v04 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: SPCR 0x0000000003577038 000050 (v02 QCOM QDF2400 00000001 QCOM 00000001) [ 0.000000] ACPI: HEST 0x0000000003577088 000288 (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: MCFG 0x0000000003577310 00005C (v01 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: WSMT 0x0000000003577370 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SPCR: console: pl011,mmio32,0xff78ed1000,115200 [ 0.000000] ACPI: Use ACPI SPCR as default console: Yes [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000017ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17f3ff59c0-0x17f3ff7fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000017ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x000000000021ffff] [ 0.000000] node 0: [mem 0x0000000000820000-0x000000000307ffff] [ 0.000000] node 0: [mem 0x0000000003080000-0x000000000308ffff] [ 0.000000] node 0: [mem 0x0000000003090000-0x00000000031fffff] [ 0.000000] node 0: [mem 0x0000000003200000-0x00000000033fffff] [ 0.000000] node 0: [mem 0x0000000003410000-0x000000000346ffff] [ 0.000000] node 0: [mem 0x0000000003470000-0x000000000349ffff] [ 0.000000] node 0: [mem 0x00000000034a0000-0x000000000357ffff] [ 0.000000] node 0: [mem 0x0000000003580000-0x000000000358ffff] [ 0.000000] node 0: [mem 0x0000000003590000-0x00000000035d1fff] [ 0.000000] node 0: [mem 0x00000000035d2000-0x00000000065e0fff] [ 0.000000] node 0: [mem 0x00000000065e1000-0x000000000666ffff] [ 0.000000] node 0: [mem 0x0000000006670000-0x0000000006faffff] [ 0.000000] node 0: [mem 0x0000000006fb0000-0x000000000722ffff] [ 0.000000] node 0: [mem 0x0000000007230000-0x00000000072cffff] [ 0.000000] node 0: [mem 0x00000000072d0000-0x000000000737ffff] [ 0.000000] node 0: [mem 0x0000000007380000-0x000000000822ffff] [ 0.000000] node 0: [mem 0x0000000008230000-0x000000000829ffff] [ 0.000000] node 0: [mem 0x00000000082a0000-0x00000000082c2fff] [ 0.000000] node 0: [mem 0x00000000082c3000-0x00000000082dffff] [ 0.000000] node 0: [mem 0x00000000082e0000-0x00000000082f2fff] [ 0.000000] node 0: [mem 0x00000000082f3000-0x000000000833ffff] [ 0.000000] node 0: [mem 0x0000000008340000-0x00000000089effff] [ 0.000000] node 0: [mem 0x00000000089f0000-0x0000000008a35fff] [ 0.000000] node 0: [mem 0x0000000008a36000-0x0000000008a47fff] [ 0.000000] node 0: [mem 0x0000000008a48000-0x0000000008a6ffff] [ 0.000000] node 0: [mem 0x0000000008a70000-0x0000000008a8ffff] [ 0.000000] node 0: [mem 0x0000000008a90000-0x0000000008aaffff] [ 0.000000] node 0: [mem 0x0000000008ab0000-0x0000000008fb1fff] [ 0.000000] node 0: [mem 0x0000000008fb2000-0x000000000df9ffff] [ 0.000000] node 0: [mem 0x000000000dfa0000-0x000000000dfcffff] [ 0.000000] node 0: [mem 0x000000000dfd0000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010800000-0x0000000017feffff] [ 0.000000] node 0: [mem 0x000000001c000000-0x000000001c00ffff] [ 0.000000] node 0: [mem 0x000000001c010000-0x000000001c7fffff] [ 0.000000] node 0: [mem 0x000000001c810000-0x000000007efbffff] [ 0.000000] node 0: [mem 0x000000007efc0000-0x000000007efdffff] [ 0.000000] node 0: [mem 0x000000007efe0000-0x000000007efeffff] [ 0.000000] node 0: [mem 0x000000007eff0000-0x000000007effffff] [ 0.000000] node 0: [mem 0x000000007f000000-0x00000017ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000017ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 1536 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 16 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 16400 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 16 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 [ 0.000000] crashkernel: memory value expected [ 0.000000] psci: probing for conduit method from ACPI. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s60056 r8192 d30056 u98304 [ 0.000000] pcpu-alloc: s60056 r8192 d30056 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 [ 0.000000] pcpu-alloc: [0] 32 [0] 33 [0] 34 [0] 35 [0] 36 [0] 37 [0] 38 [0] 39 [ 0.000000] pcpu-alloc: [0] 40 [0] 41 [0] 42 [0] 43 [0] 44 [0] 45 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.11.0-rc5-00149-g1cdaf2b62918-dirty root=/dev/mapper/rhel_qualcomm--amberwing--rep--08-root ro nokaslr crashkernel=auto rd.lvm.lv=rhel_qualcomm-amberwing-rep-08/root rd.lvm.lv=rhel_qualcomm-amberwing-rep-08/swap [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.11.0-rc5-00149-g1cdaf2b62918-dirty", will be passed to user space. [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 184320 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 123128(93%) [ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 25145296 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 64. [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=46, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=46. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=46 [ 0.000000] RCU Tasks: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Trace: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 800 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICv4 features: [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000ff7f000000 [ 0.000000] ITS [mem 0xff7efe0000-0xff7effffff] [ 0.000000] GIC: enabling workaround for ITS: QDF2400 erratum 0065 [ 0.000000] ITS@0x000000ff7efe0000: Using ITS number 0 [ 0.000000] ITS@0x000000ff7efe0000: allocated 524288 Devices @100800000 (indirect, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x000000ff7efe0000: allocated 8192 Interrupt Collections @1001d0000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x000000ff7efe0000: allocated 65536 Virtual CPUs @100200000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] GICv3: using LPI property table @0x00000001001e0000 [ 0.000000] ITS: Allocated DevID ffffffff as GICv4 proxy device (64 slots) [ 0.000000] ITS: Enabling GICv4 support [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000001001f0000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 20.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x49cd42e20, max_idle_ns: 440795202120 ns [ 0.000000] sched_clock: 56 bits at 20MHz, resolution 50ns, wraps every 4398046511100ns [ 0.000149] Console: colour dummy device 80x25 [ 0.000199] ACPI: Core revision 20240322 [ 0.000435] Calibrating delay loop (skipped), value calculated using timer frequency.. 40.00 BogoMIPS (lpj=80000) [ 0.000439] pid_max: default: 47104 minimum: 368 [ 0.000483] LSM: initializing lsm=capability [ 0.000554] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000579] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.001397] rcu: Hierarchical SRCU implementation. [ 0.001401] rcu: Max phase no-delay instances is 1000. [ 0.001455] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level [ 0.001503] fsl-mc MSI: ITS@0xff7efe0000 domain created [ 0.001520] Remapping and enabling EFI services. [ 0.002434] smp: Bringing up secondary CPUs ... [ 0.003466] Detected PIPT I-cache on CPU1 [ 0.003484] GICv3: CPU1: found redistributor 100 region 1:0x000000ff7f080000 [ 0.003492] GICv3: CPU1: using allocated LPI pending table @0x0000000100280000 [ 0.003511] CPU1: Booted secondary processor 0x0000000100 [0x510fc001] [ 0.004675] Detected PIPT I-cache on CPU2 [ 0.004693] GICv3: CPU2: found redistributor 200 region 2:0x000000ff7f100000 [ 0.004700] GICv3: CPU2: using allocated LPI pending table @0x0000000100290000 [ 0.004720] CPU2: Booted secondary processor 0x0000000200 [0x510fc001] [ 0.005887] Detected PIPT I-cache on CPU3 [ 0.005905] GICv3: CPU3: found redistributor 300 region 3:0x000000ff7f180000 [ 0.005913] GICv3: CPU3: using allocated LPI pending table @0x00000001002a0000 [ 0.005932] CPU3: Booted secondary processor 0x0000000300 [0x510fc001] [ 0.007047] Detected PIPT I-cache on CPU4 [ 0.007065] GICv3: CPU4: found redistributor 400 region 4:0x000000ff7f200000 [ 0.007073] GICv3: CPU4: using allocated LPI pending table @0x00000001002b0000 [ 0.007093] CPU4: Booted secondary processor 0x0000000400 [0x510fc001] [ 0.008228] Detected PIPT I-cache on CPU5 [ 0.008250] GICv3: CPU5: found redistributor 500 region 5:0x000000ff7f280000 [ 0.008258] GICv3: CPU5: using allocated LPI pending table @0x00000001002c0000 [ 0.008278] CPU5: Booted secondary processor 0x0000000500 [0x510fc001] [ 0.009427] Detected PIPT I-cache on CPU6 [ 0.009449] GICv3: CPU6: found redistributor 600 region 6:0x000000ff7f300000 [ 0.009457] GICv3: CPU6: using allocated LPI pending table @0x00000001002d0000 [ 0.009478] CPU6: Booted secondary processor 0x0000000600 [0x510fc001] [ 0.010632] Detected PIPT I-cache on CPU7 [ 0.010655] GICv3: CPU7: found redistributor 700 region 7:0x000000ff7f380000 [ 0.010664] GICv3: CPU7: using allocated LPI pending table @0x00000001002e0000 [ 0.010684] CPU7: Booted secondary processor 0x0000000700 [0x510fc001] [ 0.011772] Detected PIPT I-cache on CPU8 [ 0.011796] GICv3: CPU8: found redistributor 800 region 8:0x000000ff7f400000 [ 0.011804] GICv3: CPU8: using allocated LPI pending table @0x00000001002f0000 [ 0.011824] CPU8: Booted secondary processor 0x0000000800 [0x510fc001] [ 0.012963] Detected PIPT I-cache on CPU9 [ 0.012989] GICv3: CPU9: found redistributor 900 region 9:0x000000ff7f480000 [ 0.012997] GICv3: CPU9: using allocated LPI pending table @0x0000000100300000 [ 0.013018] CPU9: Booted secondary processor 0x0000000900 [0x510fc001] [ 0.014155] Detected PIPT I-cache on CPU10 [ 0.014181] GICv3: CPU10: found redistributor a00 region 10:0x000000ff7f500000 [ 0.014189] GICv3: CPU10: using allocated LPI pending table @0x0000000100310000 [ 0.014209] CPU10: Booted secondary processor 0x0000000a00 [0x510fc001] [ 0.015289] Detected PIPT I-cache on CPU11 [ 0.015316] GICv3: CPU11: found redistributor b00 region 11:0x000000ff7f580000 [ 0.015325] GICv3: CPU11: using allocated LPI pending table @0x0000000100320000 [ 0.015345] CPU11: Booted secondary processor 0x0000000b00 [0x510fc001] [ 0.016375] Detected PIPT I-cache on CPU12 [ 0.016403] GICv3: CPU12: found redistributor c00 region 12:0x000000ff7f600000 [ 0.016411] GICv3: CPU12: using allocated LPI pending table @0x0000000100330000 [ 0.016431] CPU12: Booted secondary processor 0x0000000c00 [0x510fc001] [ 0.017561] Detected PIPT I-cache on CPU13 [ 0.017591] GICv3: CPU13: found redistributor d00 region 13:0x000000ff7f680000 [ 0.017599] GICv3: CPU13: using allocated LPI pending table @0x0000000100340000 [ 0.017619] CPU13: Booted secondary processor 0x0000000d00 [0x510fc001] [ 0.018737] Detected PIPT I-cache on CPU14 [ 0.018768] GICv3: CPU14: found redistributor e00 region 14:0x000000ff7f700000 [ 0.018776] GICv3: CPU14: using allocated LPI pending table @0x0000000100350000 [ 0.018796] CPU14: Booted secondary processor 0x0000000e00 [0x510fc001] [ 0.019853] Detected PIPT I-cache on CPU15 [ 0.019885] GICv3: CPU15: found redistributor f00 region 15:0x000000ff7f780000 [ 0.019893] GICv3: CPU15: using allocated LPI pending table @0x0000000100360000 [ 0.019913] CPU15: Booted secondary processor 0x0000000f00 [0x510fc001] [ 0.021014] Detected PIPT I-cache on CPU16 [ 0.021046] GICv3: CPU16: found redistributor 1000 region 16:0x000000ff7f800000 [ 0.021054] GICv3: CPU16: using allocated LPI pending table @0x0000000100370000 [ 0.021074] CPU16: Booted secondary processor 0x0000001000 [0x510fc001] [ 0.022235] Detected PIPT I-cache on CPU17 [ 0.022272] GICv3: CPU17: found redistributor 1200 region 17:0x000000ff7f900000 [ 0.022281] GICv3: CPU17: using allocated LPI pending table @0x0000000100380000 [ 0.022301] CPU17: Booted secondary processor 0x0000001200 [0x510fc001] [ 0.023391] Detected PIPT I-cache on CPU18 [ 0.023427] GICv3: CPU18: found redistributor 1300 region 18:0x000000ff7f980000 [ 0.023435] GICv3: CPU18: using allocated LPI pending table @0x0000000100390000 [ 0.023455] CPU18: Booted secondary processor 0x0000001300 [0x510fc001] [ 0.024567] Detected PIPT I-cache on CPU19 [ 0.024603] GICv3: CPU19: found redistributor 1400 region 19:0x000000ff7fa00000 [ 0.024611] GICv3: CPU19: using allocated LPI pending table @0x00000001003a0000 [ 0.024631] CPU19: Booted secondary processor 0x0000001400 [0x510fc001] [ 0.025789] Detected PIPT I-cache on CPU20 [ 0.025829] GICv3: CPU20: found redistributor 1500 region 20:0x000000ff7fa80000 [ 0.025837] GICv3: CPU20: using allocated LPI pending table @0x00000001003b0000 [ 0.025857] CPU20: Booted secondary processor 0x0000001500 [0x510fc001] [ 0.026986] Detected PIPT I-cache on CPU21 [ 0.027025] GICv3: CPU21: found redistributor 1600 region 21:0x000000ff7fb00000 [ 0.027034] GICv3: CPU21: using allocated LPI pending table @0x00000001003c0000 [ 0.027053] CPU21: Booted secondary processor 0x0000001600 [0x510fc001] [ 0.028170] Detected PIPT I-cache on CPU22 [ 0.028209] GICv3: CPU22: found redistributor 1700 region 22:0x000000ff7fb80000 [ 0.028218] GICv3: CPU22: using allocated LPI pending table @0x00000001003d0000 [ 0.028237] CPU22: Booted secondary processor 0x0000001700 [0x510fc001] [ 0.029377] Detected PIPT I-cache on CPU23 [ 0.029419] GICv3: CPU23: found redistributor 1 region 23:0x000000ff7f040000 [ 0.029427] GICv3: CPU23: using allocated LPI pending table @0x00000001003e0000 [ 0.029445] CPU23: Booted secondary processor 0x0000000001 [0x510fc001] [ 0.030575] Detected PIPT I-cache on CPU24 [ 0.030612] GICv3: CPU24: found redistributor 101 region 24:0x000000ff7f0c0000 [ 0.030620] GICv3: CPU24: using allocated LPI pending table @0x00000001003f0000 [ 0.030637] CPU24: Booted secondary processor 0x0000000101 [0x510fc001] [ 0.031737] Detected PIPT I-cache on CPU25 [ 0.031776] GICv3: CPU25: found redistributor 201 region 25:0x000000ff7f140000 [ 0.031784] GICv3: CPU25: using allocated LPI pending table @0x0000000100c00000 [ 0.031802] CPU25: Booted secondary processor 0x0000000201 [0x510fc001] [ 0.032902] Detected PIPT I-cache on CPU26 [ 0.032943] GICv3: CPU26: found redistributor 301 region 26:0x000000ff7f1c0000 [ 0.032951] GICv3: CPU26: using allocated LPI pending table @0x0000000100c10000 [ 0.032969] CPU26: Booted secondary processor 0x0000000301 [0x510fc001] [ 0.034090] Detected PIPT I-cache on CPU27 [ 0.034132] GICv3: CPU27: found redistributor 401 region 27:0x000000ff7f240000 [ 0.034140] GICv3: CPU27: using allocated LPI pending table @0x0000000100c20000 [ 0.034158] CPU27: Booted secondary processor 0x0000000401 [0x510fc001] [ 0.035263] Detected PIPT I-cache on CPU28 [ 0.035307] GICv3: CPU28: found redistributor 501 region 28:0x000000ff7f2c0000 [ 0.035315] GICv3: CPU28: using allocated LPI pending table @0x0000000100c30000 [ 0.035333] CPU28: Booted secondary processor 0x0000000501 [0x510fc001] [ 0.036438] Detected PIPT I-cache on CPU29 [ 0.036482] GICv3: CPU29: found redistributor 601 region 29:0x000000ff7f340000 [ 0.036491] GICv3: CPU29: using allocated LPI pending table @0x0000000100c40000 [ 0.036508] CPU29: Booted secondary processor 0x0000000601 [0x510fc001] [ 0.037612] Detected PIPT I-cache on CPU30 [ 0.037658] GICv3: CPU30: found redistributor 701 region 30:0x000000ff7f3c0000 [ 0.037667] GICv3: CPU30: using allocated LPI pending table @0x0000000100c50000 [ 0.037684] CPU30: Booted secondary processor 0x0000000701 [0x510fc001] [ 0.038834] Detected PIPT I-cache on CPU31 [ 0.038880] GICv3: CPU31: found redistributor 801 region 31:0x000000ff7f440000 [ 0.038889] GICv3: CPU31: using allocated LPI pending table @0x0000000100c60000 [ 0.038907] CPU31: Booted secondary processor 0x0000000801 [0x510fc001] [ 0.040014] Detected PIPT I-cache on CPU32 [ 0.040061] GICv3: CPU32: found redistributor 901 region 32:0x000000ff7f4c0000 [ 0.040070] GICv3: CPU32: using allocated LPI pending table @0x0000000100c70000 [ 0.040088] CPU32: Booted secondary processor 0x0000000901 [0x510fc001] [ 0.041162] Detected PIPT I-cache on CPU33 [ 0.041211] GICv3: CPU33: found redistributor a01 region 33:0x000000ff7f540000 [ 0.041219] GICv3: CPU33: using allocated LPI pending table @0x0000000100c80000 [ 0.041237] CPU33: Booted secondary processor 0x0000000a01 [0x510fc001] [ 0.042325] Detected PIPT I-cache on CPU34 [ 0.042375] GICv3: CPU34: found redistributor b01 region 34:0x000000ff7f5c0000 [ 0.042384] GICv3: CPU34: using allocated LPI pending table @0x0000000100c90000 [ 0.042402] CPU34: Booted secondary processor 0x0000000b01 [0x510fc001] [ 0.043431] Detected PIPT I-cache on CPU35 [ 0.043481] GICv3: CPU35: found redistributor c01 region 35:0x000000ff7f640000 [ 0.043489] GICv3: CPU35: using allocated LPI pending table @0x0000000100ca0000 [ 0.043507] CPU35: Booted secondary processor 0x0000000c01 [0x510fc001] [ 0.044617] Detected PIPT I-cache on CPU36 [ 0.044668] GICv3: CPU36: found redistributor e01 region 36:0x000000ff7f740000 [ 0.044677] GICv3: CPU36: using allocated LPI pending table @0x0000000100cb0000 [ 0.044695] CPU36: Booted secondary processor 0x0000000e01 [0x510fc001] [ 0.045752] Detected PIPT I-cache on CPU37 [ 0.045804] GICv3: CPU37: found redistributor f01 region 37:0x000000ff7f7c0000 [ 0.045812] GICv3: CPU37: using allocated LPI pending table @0x0000000100cc0000 [ 0.045830] CPU37: Booted secondary processor 0x0000000f01 [0x510fc001] [ 0.046863] Detected PIPT I-cache on CPU38 [ 0.046914] GICv3: CPU38: found redistributor 1001 region 38:0x000000ff7f840000 [ 0.046923] GICv3: CPU38: using allocated LPI pending table @0x0000000100cd0000 [ 0.046940] CPU38: Booted secondary processor 0x0000001001 [0x510fc001] [ 0.048081] Detected PIPT I-cache on CPU39 [ 0.048143] GICv3: CPU39: found redistributor 1101 region 39:0x000000ff7f8c0000 [ 0.048152] GICv3: CPU39: using allocated LPI pending table @0x0000000100ce0000 [ 0.048173] CPU39: Booted secondary processor 0x0000001101 [0x510fc001] [ 0.049320] Detected PIPT I-cache on CPU40 [ 0.049378] GICv3: CPU40: found redistributor 1201 region 40:0x000000ff7f940000 [ 0.049387] GICv3: CPU40: using allocated LPI pending table @0x0000000100cf0000 [ 0.049405] CPU40: Booted secondary processor 0x0000001201 [0x510fc001] [ 0.050455] Detected PIPT I-cache on CPU41 [ 0.050511] GICv3: CPU41: found redistributor 1301 region 41:0x000000ff7f9c0000 [ 0.050519] GICv3: CPU41: using allocated LPI pending table @0x0000000100d00000 [ 0.050537] CPU41: Booted secondary processor 0x0000001301 [0x510fc001] [ 0.051603] Detected PIPT I-cache on CPU42 [ 0.051660] GICv3: CPU42: found redistributor 1401 region 42:0x000000ff7fa40000 [ 0.051668] GICv3: CPU42: using allocated LPI pending table @0x0000000100d10000 [ 0.051685] CPU42: Booted secondary processor 0x0000001401 [0x510fc001] [ 0.052811] Detected PIPT I-cache on CPU43 [ 0.052871] GICv3: CPU43: found redistributor 1501 region 43:0x000000ff7fac0000 [ 0.052880] GICv3: CPU43: using allocated LPI pending table @0x0000000100d20000 [ 0.052898] CPU43: Booted secondary processor 0x0000001501 [0x510fc001] [ 0.054036] Detected PIPT I-cache on CPU44 [ 0.054097] GICv3: CPU44: found redistributor 1601 region 44:0x000000ff7fb40000 [ 0.054106] GICv3: CPU44: using allocated LPI pending table @0x0000000100d30000 [ 0.054124] CPU44: Booted secondary processor 0x0000001601 [0x510fc001] [ 0.055198] Detected PIPT I-cache on CPU45 [ 0.055258] GICv3: CPU45: found redistributor 1701 region 45:0x000000ff7fbc0000 [ 0.055267] GICv3: CPU45: using allocated LPI pending table @0x0000000100d40000 [ 0.055285] CPU45: Booted secondary processor 0x0000001701 [0x510fc001] [ 0.055403] smp: Brought up 1 node, 46 CPUs [ 0.055408] SMP: Total of 46 processors activated. [ 0.055410] CPU: All CPU(s) started at EL2 [ 0.055417] CPU features: detected: CRC32 instructions [ 0.055422] CPU features: detected: Privileged Access Never [ 0.055765] alternatives: applying system-wide alternatives [ 0.056348] CPU features: detected: Hardware dirty bit management on CPU0-45 [ 0.121628] Memory: 98404128K/100581184K available (17664K kernel code, 5018K rwdata, 11744K rodata, 10304K init, 733K bss, 2109796K reserved, 32768K cma-reserved) [ 0.135449] devtmpfs: initialized [ 0.152706] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.152716] futex hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 0.153173] 21344 pages in range for non-PLT usage [ 0.153175] 512864 pages in range for PLT usage [ 0.153278] pinctrl core: initialized pinctrl subsystem [ 0.153726] SMBIOS 3.1.1 present. [ 0.153741] DMI: WIWYNN Qualcomm Centriq 2400 Reference Evaluation Platform CV90-LA115-P11/Qualcomm Centriq 2400 Customer Reference Board, BIOS [ 0.153767] DMI: Memory slots populated: 6/12 [ 0.155574] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.156410] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.156584] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.156749] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.156768] audit: initializing netlink subsys (disabled) [ 0.156844] audit: type=2000 audit(0.096:1): state=initialized audit_enabled=0 res=1 [ 0.157166] thermal_sys: Registered thermal governor 'step_wise' [ 0.157170] thermal_sys: Registered thermal governor 'power_allocator' [ 0.157216] cpuidle: using governor menu [ 0.157281] Detected 2 PCC Subspaces [ 0.157283] Registering PCC driver as Mailbox controller [ 0.157392] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers. [ 0.157914] ASID allocator initialised with 32768 entries [ 0.158493] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.158654] Serial: AMBA PL011 UART driver [ 0.159123] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.159127] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.159130] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.159132] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.159134] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.159136] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.159138] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.159140] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.160017] ACPI: Added _OSI(Module Device) [ 0.160021] ACPI: Added _OSI(Processor Device) [ 0.160023] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.160025] ACPI: Added _OSI(Processor Aggregator Device) [ 0.197537] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.662710] ACPI: Interpreter enabled [ 0.662715] ACPI: Using GIC for interrupt routing [ 0.662740] ACPI: MCFG table detected, 3 entries [ 0.663003] HEST: Table parsing has been initialized. [ 0.663122] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 0.708224] sbsa-uart ARMH0011:01: working around QDF2400 SoC erratum 44 [ 0.708309] ARMH0011:01: ttyAMA0 at MMIO 0xff78ed1000 (irq = 37, base_baud = 0) is a SBSA [ 0.708317] printk: legacy console [ttyAMA0] enabled [ 3.208281] ACPI: CPU0 has been hot-added [ 3.211506] ACPI: CPU23 has been hot-added [ 3.215615] ACPI: CPU1 has been hot-added [ 3.219569] ACPI: CPU24 has been hot-added [ 3.223683] ACPI: CPU2 has been hot-added [ 3.227636] ACPI: CPU25 has been hot-added [ 3.231854] ACPI: CPU3 has been hot-added [ 3.235715] ACPI: CPU26 has been hot-added [ 3.239824] ACPI: CPU4 has been hot-added [ 3.243784] ACPI: CPU27 has been hot-added [ 3.247894] ACPI: CPU5 has been hot-added [ 3.251856] ACPI: CPU28 has been hot-added [ 3.256077] ACPI: CPU6 has been hot-added [ 3.259933] ACPI: CPU29 has been hot-added [ 3.264040] ACPI: CPU7 has been hot-added [ 3.268003] ACPI: CPU30 has been hot-added [ 3.272130] ACPI: CPU8 has been hot-added [ 3.276076] ACPI: CPU31 has been hot-added [ 3.280296] ACPI: CPU9 has been hot-added [ 3.284150] ACPI: CPU32 has been hot-added [ 3.288262] ACPI: CPU10 has been hot-added [ 3.292313] ACPI: CPU33 has been hot-added [ 3.296419] ACPI: CPU11 has been hot-added [ 3.300464] ACPI: CPU34 has been hot-added [ 3.304684] ACPI: CPU12 has been hot-added [ 3.308628] ACPI: CPU35 has been hot-added [ 3.312739] ACPI: CPU13 has been hot-added [ 3.316825] ACPI: CPU14 has been hot-added [ 3.320866] ACPI: CPU36 has been hot-added [ 3.325087] ACPI: CPU15 has been hot-added [ 3.329025] ACPI: CPU37 has been hot-added [ 3.333135] ACPI: CPU16 has been hot-added [ 3.337186] ACPI: CPU38 has been hot-added [ 3.341305] ACPI: CPU39 has been hot-added [ 3.345484] ACPI: CPU17 has been hot-added [ 3.349422] ACPI: CPU40 has been hot-added [ 3.353537] ACPI: CPU18 has been hot-added [ 3.357581] ACPI: CPU41 has been hot-added [ 3.361695] ACPI: CPU19 has been hot-added [ 3.365741] ACPI: CPU42 has been hot-added [ 3.369960] ACPI: CPU20 has been hot-added [ 3.373903] ACPI: CPU43 has been hot-added [ 3.378015] ACPI: CPU21 has been hot-added [ 3.382064] ACPI: CPU44 has been hot-added [ 3.386176] ACPI: CPU22 has been hot-added [ 3.390229] ACPI: CPU45 has been hot-added [ 3.394338] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 3.400327] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.409430] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 3.415649] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 3.427960] acpi PNP0A08:00: ECAM area [mem 0x80000000000-0x8000fffffff] reserved by PNP0C02:00 [ 3.435718] acpi PNP0A08:00: ECAM at [mem 0x80000000000-0x8000fffffff] for [bus 00-ff] [ 3.443631] ACPI: Remapped I/O 0x000008ffffff0000 to [io 0x0000-0xffff window] [ 3.450958] PCI host bridge to bus 0000:00 [ 3.454978] pci_bus 0000:00: root bus resource [mem 0x80100100000-0x8011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 3.466257] pci_bus 0000:00: root bus resource [mem 0x80200000000-0x8021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 3.477542] pci_bus 0000:00: root bus resource [mem 0x80300000000-0x8033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 3.488826] pci_bus 0000:00: root bus resource [mem 0x80400000000-0x8fffffeffff window] [ 3.496813] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window] (bus address [0x1000-0x10fff]) [ 3.506275] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.511755] pci 0000:00:00.0: [17cb:0401] type 01 class 0x060400 PCIe Root Port [ 3.519042] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.524020] pci 0000:00:00.0: PME# supported from D0 D3hot [ 3.529603] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.534405] pci_bus 0000:00: resource 4 [mem 0x80100100000-0x8011fffffff window] [ 3.541777] pci_bus 0000:00: resource 5 [mem 0x80200000000-0x8021fffffff window] [ 3.549156] pci_bus 0000:00: resource 6 [mem 0x80300000000-0x8033fffffff window] [ 3.556534] pci_bus 0000:00: resource 7 [mem 0x80400000000-0x8fffffeffff window] [ 3.563913] pci_bus 0000:00: resource 8 [io 0x0000-0xffff window] [ 3.570127] ACPI: PCI: Interrupt link LN0A configured for IRQ 88 [ 3.576085] ACPI: PCI: Interrupt link LN0B configured for IRQ 89 [ 3.582072] ACPI: PCI: Interrupt link LN0C configured for IRQ 90 [ 3.588063] ACPI: PCI: Interrupt link LN0D configured for IRQ 91 [ 3.594178] ACPI: PCI: Interrupt link LN1A configured for IRQ 92 [ 3.600044] ACPI: PCI: Interrupt link LN1B configured for IRQ 93 [ 3.606030] ACPI: PCI: Interrupt link LN1C configured for IRQ 94 [ 3.612020] ACPI: PCI: Interrupt link LN1D configured for IRQ 95 [ 3.618118] ACPI: PCI: Interrupt link LN2A configured for IRQ 96 [ 3.624003] ACPI: PCI: Interrupt link LN2B configured for IRQ 97 [ 3.629989] ACPI: PCI: Interrupt link LN2C configured for IRQ 98 [ 3.635978] ACPI: PCI: Interrupt link LN2D configured for IRQ 99 [ 3.642072] ACPI: PCI: Interrupt link LN3A configured for IRQ 100 [ 3.648048] ACPI: PCI: Interrupt link LN3B configured for IRQ 101 [ 3.654121] ACPI: PCI: Interrupt link LN3C configured for IRQ 102 [ 3.660197] ACPI: PCI: Interrupt link LN3D configured for IRQ 103 [ 3.666384] ACPI: PCI Root Bridge [PCI4] (domain 0004 [bus 00-ff]) [ 3.672433] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.681535] acpi PNP0A08:04: _OSC: platform does not support [LTR] [ 3.687756] acpi PNP0A08:04: _OSC: OS now controls [PME AER PCIeCapability] [ 3.700346] acpi PNP0A08:04: ECAM area [mem 0xd0000000000-0xd000fffffff] reserved by PNP0C02:04 [ 3.708105] acpi PNP0A08:04: ECAM at [mem 0xd0000000000-0xd000fffffff] for [bus 00-ff] [ 3.716014] ACPI: Remapped I/O 0x00000dffffff0000 to [io 0x10000-0x1ffff window] [ 3.723516] PCI host bridge to bus 0004:00 [ 3.727537] pci_bus 0004:00: root bus resource [mem 0xd0100100000-0xd011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 3.738817] pci_bus 0004:00: root bus resource [mem 0xd0200000000-0xd021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 3.750101] pci_bus 0004:00: root bus resource [mem 0xd0300000000-0xd033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 3.761386] pci_bus 0004:00: root bus resource [mem 0xd0400000000-0xdfffffeffff window] [ 3.769373] pci_bus 0004:00: root bus resource [io 0x10000-0x1ffff window] (bus address [0x1000-0x10fff]) [ 3.779008] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.784484] pci 0004:00:00.0: [17cb:0401] type 01 class 0x060400 PCIe Root Port [ 3.791773] pci 0004:00:00.0: PCI bridge to [bus 01-02] [ 3.796979] pci 0004:00:00.0: bridge window [mem 0xdfffc000000-0xdfffe7fffff 64bit pref] [ 3.805247] pci 0004:00:00.0: PME# supported from D0 D3hot [ 3.810906] pci 0004:01:00.0: [15b3:1013] type 00 class 0x020000 PCIe Endpoint [ 3.818003] pci 0004:01:00.0: BAR 0 [mem 0xdfffc000000-0xdfffdffffff 64bit pref] [ 3.825507] pci 0004:01:00.0: ROM [mem 0xfff00000-0xffffffff pref] [ 3.831991] pci 0004:01:00.0: PME# supported from D3cold [ 3.836928] pci 0004:01:00.0: VF BAR 0 [mem 0xdfffe000000-0xdfffe0fffff 64bit pref] [ 3.844372] pci 0004:01:00.0: VF BAR 0 [mem 0xdfffe000000-0xdfffe7fffff 64bit pref]: contains BAR 0 for 8 VFs [ 3.855368] pci 0004:00:00.0: bridge window [mem 0x02000000-0x03ffffff 64bit pref] to [bus 01-02] add_size 2000000 add_align 2000000 [ 3.866325] pci 0004:00:00.0: bridge window [mem 0xd0400000000-0xd0403ffffff 64bit pref]: assigned [ 3.875260] pci 0004:00:00.0: bridge window [mem 0xd0100100000-0xd01001fffff]: assigned [ 3.883248] pci 0004:01:00.0: BAR 0 [mem 0xd0400000000-0xd0401ffffff 64bit pref]: assigned [ 3.891547] pci 0004:01:00.0: ROM [mem 0xd0100100000-0xd01001fffff pref]: assigned [ 3.899045] pci 0004:01:00.0: VF BAR 0 [mem 0xd0402000000-0xd04027fffff 64bit pref]: assigned [ 3.907572] pci 0004:00:00.0: PCI bridge to [bus 01-02] [ 3.912760] pci 0004:00:00.0: bridge window [mem 0xd0100100000-0xd01001fffff] [ 3.920051] pci 0004:00:00.0: bridge window [mem 0xd0400000000-0xd0403ffffff 64bit pref] [ 3.928298] pci_bus 0004:00: resource 4 [mem 0xd0100100000-0xd011fffffff window] [ 3.935676] pci_bus 0004:00: resource 5 [mem 0xd0200000000-0xd021fffffff window] [ 3.943054] pci_bus 0004:00: resource 6 [mem 0xd0300000000-0xd033fffffff window] [ 3.950433] pci_bus 0004:00: resource 7 [mem 0xd0400000000-0xdfffffeffff window] [ 3.957812] pci_bus 0004:00: resource 8 [io 0x10000-0x1ffff window] [ 3.964148] pci_bus 0004:01: resource 1 [mem 0xd0100100000-0xd01001fffff] [ 3.970919] pci_bus 0004:01: resource 2 [mem 0xd0400000000-0xd0403ffffff 64bit pref] [ 3.978700] ACPI: PCI: Interrupt link LN4A configured for IRQ 104 [ 3.984741] ACPI: PCI: Interrupt link LN4B configured for IRQ 105 [ 3.990815] ACPI: PCI: Interrupt link LN4C configured for IRQ 106 [ 3.996892] ACPI: PCI: Interrupt link LN4D configured for IRQ 107 [ 4.003099] ACPI: PCI Root Bridge [PCI5] (domain 0005 [bus 00-ff]) [ 4.009128] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 4.018231] acpi PNP0A08:05: _OSC: platform does not support [LTR] [ 4.024448] acpi PNP0A08:05: _OSC: OS now controls [PME AER PCIeCapability] [ 4.037098] acpi PNP0A08:05: ECAM area [mem 0xe0000000000-0xe000fffffff] reserved by PNP0C02:05 [ 4.044861] acpi PNP0A08:05: ECAM at [mem 0xe0000000000-0xe000fffffff] for [bus 00-ff] [ 4.052769] ACPI: Remapped I/O 0x00000effffff0000 to [io 0x20000-0x2ffff window] [ 4.060267] PCI host bridge to bus 0005:00 [ 4.064290] pci_bus 0005:00: root bus resource [mem 0xe0100100000-0xe011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 4.075570] pci_bus 0005:00: root bus resource [mem 0xe0200000000-0xe021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 4.086854] pci_bus 0005:00: root bus resource [mem 0xe0300000000-0xe033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 4.098145] pci_bus 0005:00: root bus resource [mem 0xe0400000000-0xefffffeffff window] [ 4.106126] pci_bus 0005:00: root bus resource [io 0x20000-0x2ffff window] (bus address [0x1000-0x10fff]) [ 4.115760] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.121237] pci 0005:00:00.0: [17cb:0401] type 01 class 0x060400 PCIe Root Port [ 4.128527] pci 0005:00:00.0: PCI bridge to [bus 01] [ 4.133500] pci 0005:00:00.0: PME# supported from D0 D3hot [ 4.139075] pci 0005:00:00.0: PCI bridge to [bus 01] [ 4.143888] pci_bus 0005:00: resource 4 [mem 0xe0100100000-0xe011fffffff window] [ 4.151264] pci_bus 0005:00: resource 5 [mem 0xe0200000000-0xe021fffffff window] [ 4.158642] pci_bus 0005:00: resource 6 [mem 0xe0300000000-0xe033fffffff window] [ 4.166024] pci_bus 0005:00: resource 7 [mem 0xe0400000000-0xefffffeffff window] [ 4.173399] pci_bus 0005:00: resource 8 [io 0x20000-0x2ffff window] [ 4.179784] ACPI: PCI: Interrupt link LN5A configured for IRQ 108 [ 4.185832] ACPI: PCI: Interrupt link LN5B configured for IRQ 109 [ 4.191906] ACPI: PCI: Interrupt link LN5C configured for IRQ 110 [ 4.197982] ACPI: PCI: Interrupt link LN5D configured for IRQ 111 [ 4.228704] iommu: Default domain type: Translated [ 4.232546] iommu: DMA domain TLB invalidation policy: strict mode [ 4.239810] SCSI subsystem initialized [ 4.242672] libata version 3.00 loaded. [ 4.242744] ACPI: bus type USB registered [ 4.246612] usbcore: registered new interface driver usbfs [ 4.252076] usbcore: registered new interface driver hub [ 4.257383] usbcore: registered new device driver usb [ 4.263083] pps_core: LinuxPPS API ver. 1 registered [ 4.267344] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 4.276458] PTP clock support registered [ 4.280521] EDAC MC: Ver: 3.0.0 [ 4.283641] scmi_core: SCMI protocol bus registered [ 4.288491] efivars: Registered efivars operations [ 4.293899] FPGA manager framework [ 4.296541] Advanced Linux Sound Architecture Driver Initialized. [ 4.303139] vgaarb: loaded [ 4.305814] clocksource: Switched to clocksource arch_sys_counter [ 4.311477] VFS: Disk quotas dquot_6.6.0 [ 4.315269] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.322238] pnp: PnP ACPI init [ 4.328226] system 00:00: [mem 0x80000000000-0x8000fffffff] could not be reserved [ 4.334850] system 00:01: [mem 0x90000000000-0x9000fffffff] has been reserved [ 4.341962] system 00:02: [mem 0xa0000000000-0xa000fffffff] has been reserved [ 4.349073] system 00:03: [mem 0xc0000000000-0xc000fffffff] has been reserved [ 4.356194] system 00:04: [mem 0xd0000000000-0xd000fffffff] could not be reserved [ 4.363660] system 00:05: [mem 0xe0000000000-0xe000fffffff] could not be reserved [ 4.375422] pnp: PnP ACPI: found 6 devices [ 4.381111] NET: Registered PF_INET protocol family [ 4.385114] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 4.395660] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 4.403994] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 4.411244] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 4.421259] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 4.428614] TCP: Hash tables configured (established 524288 bind 65536) [ 4.434389] UDP hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 4.442722] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 4.450667] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 4.455551] RPC: Registered named UNIX socket transport module. [ 4.461279] RPC: Registered udp transport module. [ 4.465959] RPC: Registered tcp transport module. [ 4.470646] RPC: Registered tcp-with-tls transport module. [ 4.476115] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.482607] PCI: CLS 0 bytes, default 64 [ 4.486508] Unpacking initramfs... [ 4.491955] kvm [1]: nv: 529 coarse grained trap handlers [ 4.496588] kvm [1]: IPA Size Limit: 44 bits [ 4.501900] kvm [1]: GICv4 support disabled [ 4.505122] kvm [1]: GICv3: no GICV resource entry [ 4.509904] kvm [1]: disabling GICv2 emulation [ 4.514363] kvm [1]: GIC system register CPU interface enabled [ 4.520158] kvm [1]: vgic interrupt IRQ9 [ 4.524112] kvm [1]: Hyp nVHE mode initialized successfully [ 4.531063] Initialise system trusted keyrings [ 4.534634] workingset: timestamp_bits=42 max_order=25 bucket_order=0 [ 4.541129] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.546917] NFS: Registering the id_resolver key type [ 4.551833] Key type id_resolver registered [ 4.555990] Key type id_legacy registered [ 4.559993] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.566667] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.574152] SGI XFS with security attributes, no debug enabled [ 4.580125] 9p: Installing v9fs 9p2000 file system support [ 4.606527] Key type asymmetric registered [ 4.609665] Asymmetric key parser 'x509' registered [ 4.614547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 4.621906] io scheduler mq-deadline registered [ 4.626418] io scheduler kyber registered [ 4.630427] io scheduler bfq registered [ 4.636132] qcom-irq-combiner QCOM80B1:00: Initialized with [p=97,n=29,r=000000005fd21f32] [ 4.643527] qcom-irq-combiner QCOM80B1:01: Initialized with [p=98,n=12,r=00000000d8983e3c] [ 4.651755] qcom-irq-combiner QCOM80B1:02: Initialized with [p=99,n=16,r=00000000d514e8fb] [ 4.660000] qcom-irq-combiner QCOM80B1:03: Initialized with [p=100,n=18,r=000000002a814efa] [ 4.704576] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.709289] ACPI: thermal: Thermal Zone [TZ0] (28 C) [ 4.714348] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.719872] ACPI: thermal: Thermal Zone [TZ1] (28 C) [ 4.724928] thermal LNXTHERM:02: registered as thermal_zone2 [ 4.730462] ACPI: thermal: Thermal Zone [TZ2] (30 C) [ 4.735519] thermal LNXTHERM:03: registered as thermal_zone3 [ 4.741052] ACPI: thermal: Thermal Zone [TZ3] (28 C) [ 4.746108] thermal LNXTHERM:04: registered as thermal_zone4 [ 4.751642] ACPI: thermal: Thermal Zone [TZ4] (28 C) [ 4.756697] thermal LNXTHERM:05: registered as thermal_zone5 [ 4.762233] ACPI: thermal: Thermal Zone [TZ5] (28 C) [ 4.767288] thermal LNXTHERM:06: registered as thermal_zone6 [ 4.772821] ACPI: thermal: Thermal Zone [TZ6] (27 C) [ 4.777881] thermal LNXTHERM:07: registered as thermal_zone7 [ 4.783412] ACPI: thermal: Thermal Zone [TZ7] (26 C) [ 4.788469] thermal LNXTHERM:08: registered as thermal_zone8 [ 4.794003] ACPI: thermal: Thermal Zone [TZ8] (26 C) [ 4.799057] thermal LNXTHERM:09: registered as thermal_zone9 [ 4.804592] ACPI: thermal: Thermal Zone [TZ9] (26 C) [ 4.809650] thermal LNXTHERM:0a: registered as thermal_zone10 [ 4.815272] ACPI: thermal: Thermal Zone [TZ10] (26 C) [ 4.820422] thermal LNXTHERM:0b: registered as thermal_zone11 [ 4.826036] ACPI: thermal: Thermal Zone [TZ11] (26 C) [ 4.831178] thermal LNXTHERM:0c: registered as thermal_zone12 [ 4.836797] ACPI: thermal: Thermal Zone [TZ12] (27 C) [ 4.841940] thermal LNXTHERM:0d: registered as thermal_zone13 [ 4.847561] ACPI: thermal: Thermal Zone [TZ13] (27 C) [ 4.852706] thermal LNXTHERM:0e: registered as thermal_zone14 [ 4.858327] ACPI: thermal: Thermal Zone [TZ14] (26 C) [ 4.863468] thermal LNXTHERM:0f: registered as thermal_zone15 [ 4.869090] ACPI: thermal: Thermal Zone [TZ15] (26 C) [ 4.874230] thermal LNXTHERM:10: registered as thermal_zone16 [ 4.879853] ACPI: thermal: Thermal Zone [TZ16] (26 C) [ 4.884995] thermal LNXTHERM:11: registered as thermal_zone17 [ 4.890617] ACPI: thermal: Thermal Zone [TZ17] (26 C) [ 4.895763] thermal LNXTHERM:12: registered as thermal_zone18 [ 4.901383] ACPI: thermal: Thermal Zone [TZ18] (29 C) [ 4.906567] thermal LNXTHERM:13: registered as thermal_zone19 [ 4.912151] ACPI: thermal: Thermal Zone [TZ19] (29 C) [ 4.917291] thermal LNXTHERM:14: registered as thermal_zone20 [ 4.922912] ACPI: thermal: Thermal Zone [TZ20] (28 C) [ 4.928050] thermal LNXTHERM:15: registered as thermal_zone21 [ 4.933673] ACPI: thermal: Thermal Zone [TZ21] (28 C) [ 4.938813] thermal LNXTHERM:16: registered as thermal_zone22 [ 4.944437] ACPI: thermal: Thermal Zone [TZ22] (29 C) [ 4.949580] thermal LNXTHERM:17: registered as thermal_zone23 [ 4.955201] ACPI: thermal: Thermal Zone [TZ23] (28 C) [ 4.960343] thermal LNXTHERM:18: registered as thermal_zone24 [ 4.965965] ACPI: thermal: Thermal Zone [TZ24] (27 C) [ 4.971104] thermal LNXTHERM:19: registered as thermal_zone25 [ 4.976729] ACPI: thermal: Thermal Zone [TZ25] (27 C) [ 4.981874] thermal LNXTHERM:1a: registered as thermal_zone26 [ 4.987492] ACPI: thermal: Thermal Zone [TZ26] (27 C) [ 4.989154] Freeing initrd memory: 32176K [ 4.992635] thermal LNXTHERM:1c: registered as thermal_zone27 [ 5.002248] ACPI: thermal: Thermal Zone [TZ28] (27 C) [ 5.007389] thermal LNXTHERM:1d: registered as thermal_zone28 [ 5.013013] ACPI: thermal: Thermal Zone [TZ29] (27 C) [ 5.018155] thermal LNXTHERM:1e: registered as thermal_zone29 [ 5.023778] ACPI: thermal: Thermal Zone [TZ30] (27 C) [ 5.028922] thermal LNXTHERM:1f: registered as thermal_zone30 [ 5.034542] ACPI: thermal: Thermal Zone [TZ31] (27 C) [ 5.039682] thermal LNXTHERM:20: registered as thermal_zone31 [ 5.045305] ACPI: thermal: Thermal Zone [TZ32] (27 C) [ 5.050447] thermal LNXTHERM:21: registered as thermal_zone32 [ 5.056068] ACPI: thermal: Thermal Zone [TZ33] (27 C) [ 5.061212] thermal LNXTHERM:23: registered as thermal_zone33 [ 5.066833] ACPI: thermal: Thermal Zone [TZ35] (27 C) [ 5.071976] thermal LNXTHERM:24: registered as thermal_zone34 [ 5.077598] ACPI: thermal: Thermal Zone [TZ36] (27 C) [ 5.082739] thermal LNXTHERM:25: registered as thermal_zone35 [ 5.088361] ACPI: thermal: Thermal Zone [TZ37] (27 C) [ 5.093502] thermal LNXTHERM:26: registered as thermal_zone36 [ 5.099125] ACPI: thermal: Thermal Zone [TZ38] (27 C) [ 5.104268] thermal LNXTHERM:27: registered as thermal_zone37 [ 5.109891] ACPI: thermal: Thermal Zone [TZ39] (27 C) [ 5.115030] thermal LNXTHERM:28: registered as thermal_zone38 [ 5.120652] ACPI: thermal: Thermal Zone [TZ40] (26 C) [ 5.125798] thermal LNXTHERM:29: registered as thermal_zone39 [ 5.131417] ACPI: thermal: Thermal Zone [TZ41] (26 C) [ 5.136600] thermal LNXTHERM:2a: registered as thermal_zone40 [ 5.142184] ACPI: thermal: Thermal Zone [TZ42] (28 C) [ 5.147325] thermal LNXTHERM:2b: registered as thermal_zone41 [ 5.152944] ACPI: thermal: Thermal Zone [TZ43] (28 C) [ 5.158085] thermal LNXTHERM:2c: registered as thermal_zone42 [ 5.163708] ACPI: thermal: Thermal Zone [TZ44] (27 C) [ 5.168852] thermal LNXTHERM:2d: registered as thermal_zone43 [ 5.174472] ACPI: thermal: Thermal Zone [TZ45] (27 C) [ 5.179613] thermal LNXTHERM:2e: registered as thermal_zone44 [ 5.185236] ACPI: thermal: Thermal Zone [TZ46] (28 C) [ 5.190376] thermal LNXTHERM:2f: registered as thermal_zone45 [ 5.195999] ACPI: thermal: Thermal Zone [TZ47] (28 C) [ 5.201142] thermal LNXTHERM:30: registered as thermal_zone46 [ 5.206764] ACPI: thermal: Thermal Zone [TZ48] (29 C) [ 5.211902] thermal LNXTHERM:31: registered as thermal_zone47 [ 5.217528] ACPI: thermal: Thermal Zone [TZ49] (29 C) [ 5.222667] thermal LNXTHERM:32: registered as thermal_zone48 [ 5.228291] ACPI: thermal: Thermal Zone [TZ50] (22 C) [ 5.233429] thermal LNXTHERM:33: registered as thermal_zone49 [ 5.239055] ACPI: thermal: Thermal Zone [TZ51] (28 C) [ 5.244192] thermal LNXTHERM:34: registered as thermal_zone50 [ 5.249819] ACPI: thermal: Thermal Zone [TZ52] (28 C) [ 5.254956] thermal LNXTHERM:35: registered as thermal_zone51 [ 5.260587] ACPI: thermal: Thermal Zone [TZ53] (26 C) [ 5.265731] thermal LNXTHERM:36: registered as thermal_zone52 [ 5.271345] ACPI: thermal: Thermal Zone [TZ54] (26 C) [ 5.276484] thermal LNXTHERM:37: registered as thermal_zone53 [ 5.282116] ACPI: thermal: Thermal Zone [TZ55] (26 C) [ 5.287252] thermal LNXTHERM:38: registered as thermal_zone54 [ 5.292875] ACPI: thermal: Thermal Zone [TZ56] (26 C) [ 5.298014] thermal LNXTHERM:39: registered as thermal_zone55 [ 5.303638] ACPI: thermal: Thermal Zone [TZ57] (25 C) [ 5.308776] thermal LNXTHERM:3a: registered as thermal_zone56 [ 5.314403] ACPI: thermal: Thermal Zone [TZ58] (26 C) [ 5.320081] EINJ: Error INJection is initialized. [ 5.324347] ACPI GTDT: found 1 SBSA generic Watchdog(s). [ 5.348057] hidma-mgmt QCOM8060:00: HW rev: 1.1 @ 0x000000ff98000000 with 6 physical channels [ 5.355737] hidma-mgmt QCOM8060:01: HW rev: 1.1 @ 0x000000ff9a000000 with 6 physical channels [ 5.364231] hidma-mgmt QCOM8060:02: HW rev: 1.1 @ 0x000000ff9c000000 with 6 physical channels [ 5.372741] hidma-mgmt QCOM8060:03: HW rev: 1.1 @ 0x000000ff9e000000 with 6 physical channels [ 5.381876] hidma QCOM8062:00: HI-DMA engine driver registration complete [ 5.388393] hidma QCOM8062:01: HI-DMA engine driver registration complete [ 5.395165] hidma QCOM8062:02: HI-DMA engine driver registration complete [ 5.401941] hidma QCOM8062:03: HI-DMA engine driver registration complete [ 5.408693] hidma QCOM8062:04: HI-DMA engine driver registration complete [ 5.415473] hidma QCOM8062:05: HI-DMA engine driver registration complete [ 5.422273] hidma QCOM8062:06: HI-DMA engine driver registration complete [ 5.429024] hidma QCOM8062:07: HI-DMA engine driver registration complete [ 5.435798] hidma QCOM8062:08: HI-DMA engine driver registration complete [ 5.442567] hidma QCOM8062:09: HI-DMA engine driver registration complete [ 5.449347] hidma QCOM8062:0a: HI-DMA engine driver registration complete [ 5.456122] hidma QCOM8062:0b: HI-DMA engine driver registration complete [ 5.462903] hidma QCOM8062:0c: HI-DMA engine driver registration complete [ 5.469679] hidma QCOM8062:0d: HI-DMA engine driver registration complete [ 5.476430] hidma QCOM8062:0e: HI-DMA engine driver registration complete [ 5.483198] hidma QCOM8062:0f: HI-DMA engine driver registration complete [ 5.489985] hidma QCOM8062:10: HI-DMA engine driver registration complete [ 5.496772] hidma QCOM8062:11: HI-DMA engine driver registration complete [ 5.503553] hidma QCOM8062:12: HI-DMA engine driver registration complete [ 5.510295] hidma QCOM8062:13: HI-DMA engine driver registration complete [ 5.517076] hidma QCOM8062:14: HI-DMA engine driver registration complete [ 5.523841] hidma QCOM8062:15: HI-DMA engine driver registration complete [ 5.530612] hidma QCOM8062:16: HI-DMA engine driver registration complete [ 5.537380] hidma QCOM8062:17: HI-DMA engine driver registration complete [ 5.552353] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.560160] msm_serial: driver initialized [ 5.563610] SuperH (H)SCI(F) driver initialized [ 5.567924] STM32 USART driver initialized [ 5.573776] arm-smmu-v3 arm-smmu-v3.0.auto: option mask 0x0 [ 5.578417] arm-smmu-v3 arm-smmu-v3.0.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0) [ 5.588294] arm-smmu-v3 arm-smmu-v3.0.auto: ias 44-bit, oas 44-bit (features 0x00181fef) [ 5.596669] arm-smmu-v3 arm-smmu-v3.0.auto: allocated 65536 entries for cmdq [ 5.603485] arm-smmu-v3 arm-smmu-v3.0.auto: allocated 32768 entries for evtq [ 5.610445] arm-smmu-v3 arm-smmu-v3.0.auto: SMMU currently enabled! Resetting... [ 5.618103] arm-smmu-v3 arm-smmu-v3.5.auto: option mask 0x0 [ 5.623390] arm-smmu-v3 arm-smmu-v3.5.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0) [ 5.633265] arm-smmu-v3 arm-smmu-v3.5.auto: ias 44-bit, oas 44-bit (features 0x00181fef) [ 5.641455] arm-smmu-v3 arm-smmu-v3.5.auto: allocated 65536 entries for cmdq [ 5.648462] arm-smmu-v3 arm-smmu-v3.5.auto: allocated 32768 entries for evtq [ 5.655404] arm-smmu-v3 arm-smmu-v3.5.auto: SMMU currently enabled! Resetting... [ 5.663048] arm-smmu-v3 arm-smmu-v3.10.auto: option mask 0x0 [ 5.668439] arm-smmu-v3 arm-smmu-v3.10.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0) [ 5.678398] arm-smmu-v3 arm-smmu-v3.10.auto: ias 44-bit, oas 44-bit (features 0x00181fef) [ 5.686665] arm-smmu-v3 arm-smmu-v3.10.auto: allocated 65536 entries for cmdq [ 5.693761] arm-smmu-v3 arm-smmu-v3.10.auto: allocated 32768 entries for evtq [ 5.700803] arm-smmu-v3 arm-smmu-v3.10.auto: SMMU currently enabled! Resetting... [ 5.708537] arm-smmu-v3 arm-smmu-v3.15.auto: option mask 0x0 [ 5.713926] arm-smmu-v3 arm-smmu-v3.15.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0) [ 5.723884] arm-smmu-v3 arm-smmu-v3.15.auto: ias 44-bit, oas 44-bit (features 0x00181fef) [ 5.732165] arm-smmu-v3 arm-smmu-v3.15.auto: allocated 65536 entries for cmdq [ 5.739261] arm-smmu-v3 arm-smmu-v3.15.auto: allocated 32768 entries for evtq [ 5.746290] arm-smmu-v3 arm-smmu-v3.15.auto: SMMU currently enabled! Resetting... [ 5.754023] arm-smmu-v3 arm-smmu-v3.20.auto: option mask 0x0 [ 5.759412] arm-smmu-v3 arm-smmu-v3.20.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0) [ 5.769370] arm-smmu-v3 arm-smmu-v3.20.auto: ias 44-bit, oas 44-bit (features 0x00181fef) [ 5.777638] arm-smmu-v3 arm-smmu-v3.20.auto: allocated 65536 entries for cmdq [ 5.784731] arm-smmu-v3 arm-smmu-v3.20.auto: allocated 32768 entries for evtq [ 5.791781] arm-smmu-v3 arm-smmu-v3.20.auto: SMMU currently enabled! Resetting... [ 5.799506] arm-smmu-v3 arm-smmu-v3.25.auto: option mask 0x0 [ 5.804898] arm-smmu-v3 arm-smmu-v3.25.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0) [ 5.814856] arm-smmu-v3 arm-smmu-v3.25.auto: ias 44-bit, oas 44-bit (features 0x00181fef) [ 5.823138] arm-smmu-v3 arm-smmu-v3.25.auto: allocated 65536 entries for cmdq [ 5.830232] arm-smmu-v3 arm-smmu-v3.25.auto: allocated 32768 entries for evtq [ 5.837262] arm-smmu-v3 arm-smmu-v3.25.auto: SMMU currently enabled! Resetting... [ 5.855531] loop: module loaded [ 5.858567] megasas: 07.727.03.00-rc1 [ 5.861870] ahci QCOM8090:00: supply ahci not found, using dummy regulator [ 5.868273] ahci QCOM8090:00: supply phy not found, using dummy regulator [ 5.875007] ahci QCOM8090:00: supply target not found, using dummy regulator [ 5.882050] ahci QCOM8090:00: SSS flag set, parallel bus scan disabled [ 5.888540] ahci QCOM8090:00: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 5.896778] ahci QCOM8090:00: 1/1 ports implemented (port mask 0x1) [ 5.903028] ahci QCOM8090:00: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 5.913345] scsi host0: ahci [ 5.915877] ata1: SATA max UDMA/133 mmio [mem 0xff88000000-0xff880001ff] port 0x100 irq 38 lpm-pol 0 [ 5.925006] ahci QCOM8090:01: supply ahci not found, using dummy regulator [ 5.931804] ahci QCOM8090:01: supply phy not found, using dummy regulator [ 5.938553] ahci QCOM8090:01: supply target not found, using dummy regulator [ 5.945590] ahci QCOM8090:01: SSS flag set, parallel bus scan disabled [ 5.952082] ahci QCOM8090:01: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 5.960324] ahci QCOM8090:01: 1/1 ports implemented (port mask 0x1) [ 5.966573] ahci QCOM8090:01: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 5.976774] scsi host1: ahci [ 5.979417] ata2: SATA max UDMA/133 mmio [mem 0xff89000000-0xff890001ff] port 0x100 irq 39 lpm-pol 0 [ 5.988548] ahci QCOM8090:02: supply ahci not found, using dummy regulator [ 5.995345] ahci QCOM8090:02: supply phy not found, using dummy regulator [ 6.002099] ahci QCOM8090:02: supply target not found, using dummy regulator [ 6.009129] ahci QCOM8090:02: SSS flag set, parallel bus scan disabled [ 6.015624] ahci QCOM8090:02: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 6.023865] ahci QCOM8090:02: 1/1 ports implemented (port mask 0x1) [ 6.030115] ahci QCOM8090:02: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 6.040323] scsi host2: ahci [ 6.042959] ata3: SATA max UDMA/133 mmio [mem 0xff8a000000-0xff8a0001ff] port 0x100 irq 40 lpm-pol 0 [ 6.052091] ahci QCOM8090:03: supply ahci not found, using dummy regulator [ 6.058887] ahci QCOM8090:03: supply phy not found, using dummy regulator [ 6.065632] ahci QCOM8090:03: supply target not found, using dummy regulator [ 6.072675] ahci QCOM8090:03: SSS flag set, parallel bus scan disabled [ 6.079166] ahci QCOM8090:03: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 6.087406] ahci QCOM8090:03: 1/1 ports implemented (port mask 0x1) [ 6.093653] ahci QCOM8090:03: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 6.103861] scsi host3: ahci [ 6.106500] ata4: SATA max UDMA/133 mmio [mem 0xff8b000000-0xff8b0001ff] port 0x100 irq 41 lpm-pol 0 [ 6.115633] ahci QCOM8090:04: supply ahci not found, using dummy regulator [ 6.122428] ahci QCOM8090:04: supply phy not found, using dummy regulator [ 6.129174] ahci QCOM8090:04: supply target not found, using dummy regulator [ 6.136219] ahci QCOM8090:04: SSS flag set, parallel bus scan disabled [ 6.142709] ahci QCOM8090:04: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 6.150949] ahci QCOM8090:04: 1/1 ports implemented (port mask 0x1) [ 6.157195] ahci QCOM8090:04: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 6.167419] scsi host4: ahci [ 6.170044] ata5: SATA max UDMA/133 mmio [mem 0xff8c000000-0xff8c0001ff] port 0x100 irq 42 lpm-pol 0 [ 6.179176] ahci QCOM8090:05: supply ahci not found, using dummy regulator [ 6.185989] ahci QCOM8090:05: supply phy not found, using dummy regulator [ 6.192716] ahci QCOM8090:05: supply target not found, using dummy regulator [ 6.199762] ahci QCOM8090:05: SSS flag set, parallel bus scan disabled [ 6.206251] ahci QCOM8090:05: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 6.214491] ahci QCOM8090:05: 1/1 ports implemented (port mask 0x1) [ 6.220736] ahci QCOM8090:05: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 6.230953] scsi host5: ahci [ 6.233570] ata6: SATA max UDMA/133 mmio [mem 0xff8d000000-0xff8d0001ff] port 0x100 irq 43 lpm-pol 0 [ 6.242404] ata1: SATA link down (SStatus 0 SControl 300) [ 6.242723] ahci QCOM8090:06: supply ahci not found, using dummy regulator [ 6.254899] ahci QCOM8090:06: supply phy not found, using dummy regulator [ 6.261642] ahci QCOM8090:06: supply target not found, using dummy regulator [ 6.268677] ahci QCOM8090:06: SSS flag set, parallel bus scan disabled [ 6.275175] ahci QCOM8090:06: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 6.283413] ahci QCOM8090:06: 1/1 ports implemented (port mask 0x1) [ 6.289664] ahci QCOM8090:06: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 6.299875] scsi host6: ahci [ 6.302507] ata7: SATA max UDMA/133 mmio [mem 0xff8e000000-0xff8e0001ff] port 0x100 irq 44 lpm-pol 0 [ 6.305945] ata2: SATA link down (SStatus 0 SControl 300) [ 6.311638] ahci QCOM8090:07: supply ahci not found, using dummy regulator [ 6.323823] ahci QCOM8090:07: supply phy not found, using dummy regulator [ 6.330567] ahci QCOM8090:07: supply target not found, using dummy regulator [ 6.337603] ahci QCOM8090:07: SSS flag set, parallel bus scan disabled [ 6.344093] ahci QCOM8090:07: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode [ 6.352338] ahci QCOM8090:07: 1/1 ports implemented (port mask 0x1) [ 6.358587] ahci QCOM8090:07: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 6.362776] ata3: SATA link down (SStatus 0 SControl 300) [ 6.374167] scsi host7: ahci [ 6.376802] ata8: SATA max UDMA/133 mmio [mem 0xff8f000000-0xff8f0001ff] port 0x100 irq 45 lpm-pol 0 [ 6.390569] tun: Universal TUN/TAP device driver, 1.6 [ 6.395455] thunder_xcv, ver 1.0 [ 6.397902] thunder_bgx, ver 1.0 [ 6.401093] nicpf, ver 1.0 [ 6.405128] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 6.411402] hns3: Copyright (c) 2017 Huawei Corporation. [ 6.416712] hclge is initializing [ 6.420016] e1000: Intel(R) PRO/1000 Network Driver [ 6.424848] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 6.429988] ata4: SATA link down (SStatus 0 SControl 300) [ 6.430590] e1000e: Intel(R) PRO/1000 Network Driver [ 6.440906] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 6.446823] igb: Intel(R) Gigabit Ethernet Network Driver [ 6.452190] igb: Copyright (c) 2007-2014 Intel Corporation. [ 6.457760] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 6.463998] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 6.470320] sky2: driver version 1.30 [ 6.474742] VFIO - User Level meta-driver version: 0.3 [ 6.481526] xhci-hcd QCOM8041:00: xHCI Host Controller [ 6.485719] xhci-hcd QCOM8041:00: new USB bus registered, assigned bus number 1 [ 6.492055] ata5: SATA link down (SStatus 0 SControl 300) [ 6.493126] xhci-hcd QCOM8041:00: USB3 root hub has no ports [ 6.504025] xhci-hcd QCOM8041:00: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000000000010 [ 6.513065] xhci-hcd QCOM8041:00: irq 101, io mem 0xff79800000 [ 6.519149] hub 1-0:1.0: USB hub found [ 6.522616] hub 1-0:1.0: 1 port detected [ 6.526710] xhci-hcd QCOM8041:01: xHCI Host Controller [ 6.531635] xhci-hcd QCOM8041:01: new USB bus registered, assigned bus number 2 [ 6.539046] xhci-hcd QCOM8041:01: USB3 root hub has no ports [ 6.544563] xhci-hcd QCOM8041:01: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000000000010 [ 6.553611] xhci-hcd QCOM8041:01: irq 102, io mem 0xff79a00000 [ 6.554777] ata6: SATA link down (SStatus 0 SControl 300) [ 6.559673] hub 2-0:1.0: USB hub found [ 6.568532] hub 2-0:1.0: 1 port detected [ 6.572625] xhci-hcd QCOM8041:02: xHCI Host Controller [ 6.577557] xhci-hcd QCOM8041:02: new USB bus registered, assigned bus number 3 [ 6.584970] xhci-hcd QCOM8041:02: USB3 root hub has no ports [ 6.590486] xhci-hcd QCOM8041:02: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000000000010 [ 6.599535] xhci-hcd QCOM8041:02: irq 103, io mem 0xff79c00000 [ 6.605579] hub 3-0:1.0: USB hub found [ 6.609074] hub 3-0:1.0: 1 port detected [ 6.613167] xhci-hcd QCOM8041:03: xHCI Host Controller [ 6.618105] xhci-hcd QCOM8041:03: new USB bus registered, assigned bus number 4 [ 6.625503] xhci-hcd QCOM8041:03: USB3 root hub has no ports [ 6.631025] xhci-hcd QCOM8041:03: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000000000010 [ 6.640070] xhci-hcd QCOM8041:03: irq 104, io mem 0xff79e00000 [ 6.646121] hub 4-0:1.0: USB hub found [ 6.649599] hub 4-0:1.0: 1 port detected [ 6.654008] usbcore: registered new interface driver usb-storage [ 6.662248] rtc-efi rtc-efi.0: registered as rtc0 [ 6.666051] rtc-efi rtc-efi.0: setting system clock to 2024-09-05T23:38:18 UTC (1725579498) [ 6.675142] i2c_dev: i2c /dev entries driver [ 6.685164] sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 20000000 Hz, action=0. [ 6.693820] ghes_edac: This system has 12 DIMM sockets. [ 6.698325] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 6.709067] sdhci: Secure Digital Host Controller Interface driver [ 6.714304] sdhci: Copyright(c) Pierre Ossman [ 6.718798] sdhci-acpi QCOM8051:00: error -ENXIO: IRQ index 1 not found [ 6.719402] Synopsys Designware Multimedia Card Interface Driver [ 6.725273] mmc0: Hardware doesn't report any support voltages. [ 6.732171] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.745224] ledtrig-cpu: registered to indicate activity on CPUs [ 6.751133] pstore: Using crash dump compression: deflate [ 6.755664] pstore: Registered efi_pstore as persistent store backend [ 6.762939] usbcore: registered new interface driver usbhid [ 6.767646] usbhid: USB HID core driver [ 6.774983] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 9 counters available [ 6.783271] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 0 [ 6.785670] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.789295] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 1 [ 6.802187] ata7.00: ATA-10: ST4000NM0035-1V4107, TN02, max UDMA/133 [ 6.802407] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 2 [ 6.808721] ata7.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32) [ 6.815681] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 3 [ 6.823347] ata7.00: configured for UDMA/133 [ 6.829214] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 4 [ 6.833622] scsi 6:0:0:0: Direct-Access ATA ST4000NM0035-1V4 TN02 PQ: 0 ANSI: 5 [ 6.840415] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 5 [ 6.840427] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 6 [ 6.849010] sd 6:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 6.855446] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 7 [ 6.862423] sd 6:0:0:0: [sda] Write Protect is off [ 6.870105] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.870107] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 8 [ 6.877036] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.877438] ata8.00: ATA-10: ST4000NM0035-1V4107, TN02, max UDMA/133 [ 6.877442] ata8.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32) [ 6.878520] ata8.00: configured for UDMA/133 [ 6.878664] scsi 7:0:0:0: Direct-Access ATA ST4000NM0035-1V4 TN02 PQ: 0 ANSI: 5 [ 6.879052] sd 7:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 6.879075] sd 7:0:0:0: [sdb] Write Protect is off [ 6.879081] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.879112] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.879169] sd 7:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 6.881818] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 9 [ 6.888013] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.894925] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 10 [ 6.901280] sd 6:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 6.907862] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 11 [ 6.921678] usb 4-1: new high-speed USB device number 2 using xhci-hcd [ 6.927916] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 12 [ 6.997617] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 13 [ 7.004654] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 14 [ 7.011681] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 15 [ 7.018713] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 16 [ 7.025745] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 17 [ 7.032773] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 18 [ 7.039804] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 19 [ 7.046835] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 20 [ 7.053868] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 21 [ 7.060898] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 22 [ 7.067928] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 23 [ 7.074962] qcom-l2cache-pmu QCOM8130:00: CPU0 associated with cluster 0 [ 7.081675] qcom-l2cache-pmu QCOM8130:00: CPU1 associated with cluster 1 [ 7.088350] qcom-l2cache-pmu QCOM8130:00: CPU2 associated with cluster 2 [ 7.095031] qcom-l2cache-pmu QCOM8130:00: CPU3 associated with cluster 3 [ 7.101710] qcom-l2cache-pmu QCOM8130:00: CPU4 associated with cluster 4 [ 7.108390] qcom-l2cache-pmu QCOM8130:00: CPU5 associated with cluster 5 [ 7.115093] qcom-l2cache-pmu QCOM8130:00: CPU6 associated with cluster 6 [ 7.121763] qcom-l2cache-pmu QCOM8130:00: CPU7 associated with cluster 7 [ 7.126050] hub 4-1:1.0: USB hub found [ 7.128459] qcom-l2cache-pmu QCOM8130:00: CPU8 associated with cluster 8 [ 7.132251] hub 4-1:1.0: 4 ports detected [ 7.138860] qcom-l2cache-pmu QCOM8130:00: CPU9 associated with cluster 9 [ 7.149547] qcom-l2cache-pmu QCOM8130:00: CPU10 associated with cluster 10 [ 7.150997] sdb: sdb1 [ 7.156408] qcom-l2cache-pmu QCOM8130:00: CPU11 associated with cluster 11 [ 7.158651] sda: sda1 sda2 sda3 [ 7.158816] sd 7:0:0:0: [sdb] Attached SCSI disk [ 7.158874] sd 6:0:0:0: [sda] Attached SCSI disk [ 7.165597] qcom-l2cache-pmu QCOM8130:00: CPU12 associated with cluster 12 [ 7.184875] qcom-l2cache-pmu QCOM8130:00: CPU13 associated with cluster 13 [ 7.191740] qcom-l2cache-pmu QCOM8130:00: CPU14 associated with cluster 14 [ 7.198586] qcom-l2cache-pmu QCOM8130:00: CPU15 associated with cluster 15 [ 7.205459] qcom-l2cache-pmu QCOM8130:00: CPU16 associated with cluster 16 [ 7.212305] qcom-l2cache-pmu QCOM8130:00: CPU17 associated with cluster 18 [ 7.219164] qcom-l2cache-pmu QCOM8130:00: CPU18 associated with cluster 19 [ 7.226018] qcom-l2cache-pmu QCOM8130:00: CPU19 associated with cluster 20 [ 7.232889] qcom-l2cache-pmu QCOM8130:00: CPU20 associated with cluster 21 [ 7.239743] qcom-l2cache-pmu QCOM8130:00: CPU21 associated with cluster 22 [ 7.246602] qcom-l2cache-pmu QCOM8130:00: CPU22 associated with cluster 23 [ 7.253460] qcom-l2cache-pmu QCOM8130:00: CPU23 associated with cluster 0 [ 7.260230] qcom-l2cache-pmu QCOM8130:00: CPU24 associated with cluster 1 [ 7.266997] qcom-l2cache-pmu QCOM8130:00: CPU25 associated with cluster 2 [ 7.273770] qcom-l2cache-pmu QCOM8130:00: CPU26 associated with cluster 3 [ 7.280538] qcom-l2cache-pmu QCOM8130:00: CPU27 associated with cluster 4 [ 7.287308] qcom-l2cache-pmu QCOM8130:00: CPU28 associated with cluster 5 [ 7.294077] qcom-l2cache-pmu QCOM8130:00: CPU29 associated with cluster 6 [ 7.300851] qcom-l2cache-pmu QCOM8130:00: CPU30 associated with cluster 7 [ 7.307620] qcom-l2cache-pmu QCOM8130:00: CPU31 associated with cluster 8 [ 7.314396] qcom-l2cache-pmu QCOM8130:00: CPU32 associated with cluster 9 [ 7.321163] qcom-l2cache-pmu QCOM8130:00: CPU33 associated with cluster 10 [ 7.328019] qcom-l2cache-pmu QCOM8130:00: CPU34 associated with cluster 11 [ 7.334882] qcom-l2cache-pmu QCOM8130:00: CPU35 associated with cluster 12 [ 7.341734] qcom-l2cache-pmu QCOM8130:00: CPU36 associated with cluster 14 [ 7.348593] qcom-l2cache-pmu QCOM8130:00: CPU37 associated with cluster 15 [ 7.355451] qcom-l2cache-pmu QCOM8130:00: CPU38 associated with cluster 16 [ 7.362312] qcom-l2cache-pmu QCOM8130:00: CPU39 associated with cluster 17 [ 7.369173] qcom-l2cache-pmu QCOM8130:00: CPU40 associated with cluster 18 [ 7.376028] qcom-l2cache-pmu QCOM8130:00: CPU41 associated with cluster 19 [ 7.382884] qcom-l2cache-pmu QCOM8130:00: CPU42 associated with cluster 20 [ 7.389739] qcom-l2cache-pmu QCOM8130:00: CPU43 associated with cluster 21 [ 7.396595] qcom-l2cache-pmu QCOM8130:00: CPU44 associated with cluster 22 [ 7.403453] qcom-l2cache-pmu QCOM8130:00: CPU45 associated with cluster 23 [ 7.410359] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU using 24 HW PMUs [ 7.418808] qcom-l3cache-pmu QCOM8081:00: Registered l3cache_0_0, type: 10 [ 7.425388] qcom-l3cache-pmu QCOM8081:01: Registered l3cache_0_1, type: 11 [ 7.432245] qcom-l3cache-pmu QCOM8081:02: Registered l3cache_0_2, type: 12 [ 7.439096] qcom-l3cache-pmu QCOM8081:03: Registered l3cache_0_3, type: 13 [ 7.445967] qcom-l3cache-pmu QCOM8081:04: Registered l3cache_0_4, type: 14 [ 7.452821] qcom-l3cache-pmu QCOM8081:05: Registered l3cache_0_5, type: 15 [ 7.459662] qcom-l3cache-pmu QCOM8081:06: Registered l3cache_0_6, type: 16 [ 7.466538] qcom-l3cache-pmu QCOM8081:07: Registered l3cache_0_7, type: 17 [ 7.473378] qcom-l3cache-pmu QCOM8081:08: Registered l3cache_0_8, type: 18 [ 7.480242] qcom-l3cache-pmu QCOM8081:09: Registered l3cache_0_9, type: 19 [ 7.487104] qcom-l3cache-pmu QCOM8081:0a: Registered l3cache_0_10, type: 20 [ 7.494058] qcom-l3cache-pmu QCOM8081:0b: Registered l3cache_0_11, type: 21 [ 7.503927] NET: Registered PF_PACKET protocol family [ 7.508061] 9pnet: Installing 9P2000 support [ 7.512300] Key type dns_resolver registered [ 7.521232] registered taskstats version 1 [ 7.524826] Loading compiled-in X.509 certificates [ 7.533676] Demotion targets for Node 0: null [ 7.537326] pcieport 0000:00:00.0: Adding to iommu group 0 [ 7.542737] ACPI: \_SB_.LN0A: Enabled at IRQ 88 [ 7.547210] pcieport 0000:00:00.0: PME: Signaling with IRQ 420 [ 7.552991] pcieport 0000:00:00.0: AER: enabled with IRQ 420 [ 7.558670] pcieport 0004:00:00.0: Adding to iommu group 1 [ 7.564162] ACPI: \_SB_.LN4A: Enabled at IRQ 104 [ 7.568715] pcieport 0004:00:00.0: PME: Signaling with IRQ 422 [ 7.574494] pcieport 0004:00:00.0: AER: enabled with IRQ 422 [ 7.580189] pcieport 0005:00:00.0: Adding to iommu group 2 [ 7.585696] ACPI: \_SB_.LN5A: Enabled at IRQ 108 [ 7.590250] pcieport 0005:00:00.0: PME: Signaling with IRQ 424 [ 7.596021] pcieport 0005:00:00.0: AER: enabled with IRQ 424 [ 7.601855] clk: Disabling unused clocks [ 7.605477] PM: genpd: Disabling unused power domains [ 7.610530] ALSA device list: [ 7.613462] No soundcards found. [ 7.617857] Freeing unused kernel memory: 10304K [ 7.621550] Run /init as init process [ 7.625164] with arguments: [ 7.625166] /init [ 7.625169] with environment: [ 7.625170] HOME=/ [ 7.625172] TERM=linux [ 7.625174] BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.11.0-rc5-00149-g1cdaf2b62918-dirty [ 7.642397] NET: Registered PF_INET6 protocol family [ 7.646799] Segment Routing with IPv6 [ 7.650074] In-situ OAM (IOAM) with IPv6 [ 7.699426] systemd[1]: systemd 239 (239-74.el8_8.5) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 7.721850] systemd[1]: Detected architecture arm64. [ 7.726198] systemd[1]: Running in initial RAM disk. [ 7.805707] systemd[1]: Set hostname to <qualcomm-amberwing-rep-08.khw.eng.rdu2.dc.redhat.com>. [ 7.925629] systemd[1]: Listening on udev Control Socket. [ 7.941815] systemd[1]: Listening on udev Kernel Socket. [ 7.957836] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.973704] systemd[1]: Reached target Timers. [ 7.985696] systemd[1]: Reached target Local File Systems. [ 8.001694] systemd[1]: Reached target Slices. [ 8.496241] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxxxxxxx [ 9.090394] qcom-emac QCOM8070:00 eth0: hardware id 64.1, hardware version 1.3.0 [ 9.099485] usbcore: registered new device driver onboard-usb-dev [ 9.110010] mlx5_core 0004:01:00.0: Adding to iommu group 3 [ 9.119994] mlx5_core 0004:01:00.0: firmware version: 12.17.2020 [ 9.125138] mlx5_core 0004:01:00.0: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link) [ 9.179780] qcom-emac QCOM8070:00 enaqcom8070i0: renamed from eth0 [ 9.417576] mlx5_core 0004:01:00.0: E-Switch: Total vports 10, per vport: max uc(1024) max mc(16384) [ 9.429672] mlx5_core 0004:01:00.0: Port module event: module 0, Cable unplugged [ 9.558864] mlx5_core 0004:01:00.0: MLX5E: StrdRq(0) RqSz(1024) StrdSz(256) RxCqeCmprss(0 basic) [ 9.569301] mlx5_core 0004:01:00.0 enP4p1s0np0: renamed from eth0 [ 10.313964] XFS (dm-0): Mounting V5 Filesystem c00a13ef-e394-4153-96aa-8cebecd313d1 [ 10.448387] XFS (dm-0): Ending clean mount [ 11.135226] printk: systemd: 16 output lines suppressed due to ratelimiting [ 11.650784] systemd[1]: systemd 239 (239-74.el8_8.5) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 11.673195] systemd[1]: Detected architecture arm64. [ 11.698568] systemd[1]: Set hostname to <qualcomm-amberwing-rep-08.khw.eng.rdu2.dc.redhat.com>. [ 12.823244] systemd[1]: initrd-switch-root.service: Succeeded. [ 12.828687] systemd[1]: Stopped Switch Root. [ 12.833357] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. [ 12.846519] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 12.855454] systemd[1]: Stopped Journal Service. [ 12.861519] systemd[1]: Starting Journal Service... [ 12.870475] systemd[1]: Activating swap /dev/mapper/rhel_qualcomm--amberwing--rep--08-swap... [ 13.073952] xfs filesystem being remounted at / supports timestamps until 2038-01-19 (0x7fffffff) [ 13.375081] Unable to find swap-space signature [ 13.524789] XFS (sda2): Mounting V5 Filesystem 716c5a64-a0b4-46e2-8558-2b76cb5b8744 [ 13.739195] XFS (sda2): Ending clean mount [ 13.743588] xfs filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff) [ 13.984268] IPMI message handler: version 39.2 [ 13.998420] ipmi device interface [ 14.034184] ipmi_si: IPMI System Interface driver [ 14.146526] ipmi_si: Unable to find any System Interface(s) [ 14.159483] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.1.auto: error -EINVAL: invalid resource (null) [ 14.167076] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.1.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.177707] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.2.auto: error -EINVAL: invalid resource (null) [ 14.185557] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.2.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.196311] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.3.auto: error -EINVAL: invalid resource (null) [ 14.203808] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.3.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.214629] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.4.auto: error -EINVAL: invalid resource (null) [ 14.222208] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.4.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.232504] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.6.auto: error -EINVAL: invalid resource (null) [ 14.240611] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.6.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.250629] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.7.auto: error -EINVAL: invalid resource (null) [ 14.259005] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.7.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.269004] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: error -EINVAL: invalid resource (null) [ 14.277408] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.287408] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: error -EINVAL: invalid resource (null) [ 14.295812] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.295832] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: error -EINVAL: invalid resource (null) [ 14.314297] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.324386] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: error -EINVAL: invalid resource (null) [ 14.338345] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.348606] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: error -EINVAL: invalid resource (null) [ 14.357100] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.367184] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: error -EINVAL: invalid resource (null) [ 14.375671] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.385759] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.16.auto: error -EINVAL: invalid resource (null) [ 14.394247] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.16.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.404333] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.17.auto: error -EINVAL: invalid resource (null) [ 14.412824] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.17.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.422911] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.18.auto: error -EINVAL: invalid resource (null) [ 14.431400] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.18.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.441486] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.19.auto: error -EINVAL: invalid resource (null) [ 14.449977] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.19.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.460064] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.21.auto: error -EINVAL: invalid resource (null) [ 14.468557] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.21.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.478654] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.22.auto: error -EINVAL: invalid resource (null) [ 14.487130] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.22.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.497215] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.23.auto: error -EINVAL: invalid resource (null) [ 14.505706] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.23.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.515791] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.24.auto: error -EINVAL: invalid resource (null) [ 14.524282] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.24.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.534368] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.26.auto: error -EINVAL: invalid resource (null) [ 14.542859] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.26.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.552945] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.27.auto: error -EINVAL: invalid resource (null) [ 14.561435] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.27.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.571522] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.28.auto: error -EINVAL: invalid resource (null) [ 14.580015] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.28.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.590104] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.29.auto: error -EINVAL: invalid resource (null) [ 14.598588] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.29.auto: probe with driver arm-smmu-v3-pmcg failed with error -22 [ 14.828218] XFS (dm-2): Mounting V5 Filesystem 40c91245-6cbf-45c2-bb5e-9b5d0dea6fb2 [ 15.035970] XFS (dm-2): Ending clean mount [ 15.042630] xfs filesystem being mounted at /home supports timestamps until 2038-01-19 (0x7fffffff) [ 17.348245] mlx5_core 0004:01:00.0 enP4p1s0np0: Link down [ 17.421973] Qualcomm Atheros AR8031/AR8033 QCOM8070:00:04: attached PHY driver (mii_bus:phy_addr=QCOM8070:00:04, irq=POLL) [ 17.433281] qcom-emac QCOM8070:00 enaqcom8070i0: Link is Down [ 21.534315] qcom-emac QCOM8070:00 enaqcom8070i0: Link is Up - 1Gbps/Full - flow control off
