On 5/16/24 9:42 AM, Gatien CHEVALLIER wrote:
Hi,
What if you add a trace in a random generation function in random.c?
Do you have a function name or line number for me ?
I put a trace in _get_random_bytes() in drivers/char/random.c. I'm not
100% sure but this should be the entry point when getting a random
number.
You're right, there is a read attempt right before the hang, and
__clk_is_enabled() returns 0 in stm32_read_rng() . In fact, it is the
pm_runtime_get_sync() which is returning -EACCES instead of zero, and
this is currently not checked so the failure is not detected before
register access takes place, to register file with clock disabled,
which triggers a hard hang.
I'll be sending a patch shortly, thanks for this hint !
Great news, indeed the return code isn't checked. Let's use
pm_runtime_resume_and_get().
Yes please.
I will wonder why we get EACCES though, that basically means we are
suspending already. Is it safe to return -errno from rng read function
in that case ?
After this, I'll try to reproduce the issue.
If you have a minute to test it on some ST MP15 board, that would be
real nice. Thanks !
I tried to reproduce the issue you're facing on a STM32MP157C-DK2 no
SCMI on the 6.9-rc7 kernel tag. I uses OP-TEE and TF-A in the bootchain
but this should not have an impact here.
How did you manage to test using "echo core > /sys/power/pm_test"?
In kernel/power/suspend.c, enter_state(). If the pm_test_level is core,
then an error is fired with the following trace:
"Unsupported test mode for suspend to idle, please choose
none/freezer/devices/platform."
Could this be firmware related ?
I've tried using "echo devices > /sys/power/pm_test" so that I can at
least test that the driver is put to sleep then wakes up. I do not
reproduce your issue.
Can you try 'processors' ?
Given this:
#ifdef CONFIG_PM_DEBUG
if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) {
pr_warn("Unsupported test mode for suspend to idle
You're supposed to be suspending to 'mem' , not 'idle' . Could that be it ?
