Re: [PATCH v5 00/10] crypto: qat - enable QAT GEN4 SRIOV VF live migration for QAT GEN4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 28 Mar 2024 18:51:41 +0800
Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> wrote:

> On Wed, Mar 06, 2024 at 09:58:45PM +0800, Xin Zeng wrote:
> > This set enables live migration for Intel QAT GEN4 SRIOV Virtual
> > Functions (VFs).
> > It is composed of 10 patches. Patch 1~6 refactor the original QAT PF
> > driver implementation which will be reused by the following patches.
> > Patch 7 introduces the logic to the QAT PF driver that allows to save
> > and restore the state of a bank (a QAT VF is a wrapper around banks) and
> > drain a ring pair. Patch 8 adds the QAT PF driver a set of interfaces to
> > allow to save and restore the state of a VF that will be called by the
> > module qat_vfio_pci which will be introduced in the last patch. Patch 9
> > implements the defined device interfaces. The last one adds a vfio pci
> > extension specific for QAT which intercepts the vfio device operations
> > for a QAT VF to allow live migration.
> > 
> > Here are the steps required to test the live migration of a QAT GEN4 VF:
> > 1. Bind one or more QAT GEN4 VF devices to the module qat_vfio_pci.ko 
> > 2. Assign the VFs to the virtual machine and enable device live
> > migration 
> > 3. Run a workload using a QAT VF inside the VM, for example using qatlib
> > (https://github.com/intel/qatlib) 
> > 4. Migrate the VM from the source node to a destination node
> > 
> > Changes in v5 since v4: https://lore.kernel.org/kvm/20240228143402.89219-9-xin.zeng@xxxxxxxxx
> > -  Remove device ID recheck as no consensus has been reached yet (Kevin)
> > -  Add missing state PRE_COPY_P2P in precopy_iotcl (Kevin)
> > -  Rearrange the state transition flow for better readability (Kevin)
> > -  Remove unnecessary Reviewed-by in commit message (Kevin)
> > 
> > Changes in v4 since v3: https://lore.kernel.org/kvm/20240221155008.960369-11-xin.zeng@xxxxxxxxx
> > -  Change the order of maintainer entry for QAT vfio pci driver in
> >    MAINTAINERS to make it alphabetical (Alex)
> > -  Put QAT VFIO PCI driver under vfio/pci directly instead of
> >    vfio/pci/intel (Alex)
> > -  Add id_table recheck during device probe (Alex)
> > 
> > Changes in v3 since v2: https://lore.kernel.org/kvm/20240220032052.66834-1-xin.zeng@xxxxxxxxx
> > -  Use state_mutex directly instead of unnecessary deferred_reset mode
> >    (Jason)
> > 
> > Changes in v2 since v1: https://lore.kernel.org/all/20240201153337.4033490-1-xin.zeng@xxxxxxxxx
> > -  Add VFIO_MIGRATION_PRE_COPY support (Alex)
> > -  Remove unnecessary module dependancy in Kconfig (Alex)
> > -  Use direct function calls instead of function pointers in qat vfio
> >    variant driver (Jason)
> > -  Address the comments including uncessary pointer check and kfree,
> >    missing lock and direct use of pci_iov_vf_id (Shameer)
> > -  Change CHECK_STAT macro to avoid repeat comparison (Kamlesh)
> > 
> > Changes in v1 since RFC: https://lore.kernel.org/all/20230630131304.64243-1-xin.zeng@xxxxxxxxx
> > -  Address comments including the right module dependancy in Kconfig,
> >    source file name and module description (Alex)
> > -  Added PCI error handler and P2P state handler (Suggested by Kevin)
> > -  Refactor the state check duing loading ring state (Kevin) 
> > -  Fix missed call to vfio_put_device in the error case (Breet)
> > -  Migrate the shadow states in PF driver
> > -  Rebase on top of 6.8-rc1
> > 
> > Giovanni Cabiddu (2):
> >   crypto: qat - adf_get_etr_base() helper
> >   crypto: qat - relocate CSR access code
> > 
> > Siming Wan (3):
> >   crypto: qat - rename get_sla_arr_of_type()
> >   crypto: qat - expand CSR operations for QAT GEN4 devices
> >   crypto: qat - add bank save and restore flows
> > 
> > Xin Zeng (5):
> >   crypto: qat - relocate and rename 4xxx PF2VM definitions
> >   crypto: qat - move PFVF compat checker to a function
> >   crypto: qat - add interface for live migration
> >   crypto: qat - implement interface for live migration
> >   vfio/qat: Add vfio_pci driver for Intel QAT VF devices
> > 
> >  MAINTAINERS                                   |    8 +
> >  .../intel/qat/qat_420xx/adf_420xx_hw_data.c   |    3 +
> >  .../intel/qat/qat_4xxx/adf_4xxx_hw_data.c     |    5 +
> >  .../intel/qat/qat_c3xxx/adf_c3xxx_hw_data.c   |    1 +
> >  .../qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c     |    1 +
> >  .../intel/qat/qat_c62x/adf_c62x_hw_data.c     |    1 +
> >  .../intel/qat/qat_c62xvf/adf_c62xvf_hw_data.c |    1 +
> >  drivers/crypto/intel/qat/qat_common/Makefile  |    6 +-
> >  .../intel/qat/qat_common/adf_accel_devices.h  |   88 ++
> >  .../intel/qat/qat_common/adf_common_drv.h     |   10 +
> >  .../qat/qat_common/adf_gen2_hw_csr_data.c     |  101 ++
> >  .../qat/qat_common/adf_gen2_hw_csr_data.h     |   86 ++
> >  .../intel/qat/qat_common/adf_gen2_hw_data.c   |   97 --
> >  .../intel/qat/qat_common/adf_gen2_hw_data.h   |   76 --
> >  .../qat/qat_common/adf_gen4_hw_csr_data.c     |  231 ++++
> >  .../qat/qat_common/adf_gen4_hw_csr_data.h     |  188 +++
> >  .../intel/qat/qat_common/adf_gen4_hw_data.c   |  380 +++++--
> >  .../intel/qat/qat_common/adf_gen4_hw_data.h   |  127 +--
> >  .../intel/qat/qat_common/adf_gen4_pfvf.c      |    8 +-
> >  .../intel/qat/qat_common/adf_gen4_vf_mig.c    | 1010 +++++++++++++++++
> >  .../intel/qat/qat_common/adf_gen4_vf_mig.h    |   10 +
> >  .../intel/qat/qat_common/adf_mstate_mgr.c     |  318 ++++++
> >  .../intel/qat/qat_common/adf_mstate_mgr.h     |   89 ++
> >  .../intel/qat/qat_common/adf_pfvf_pf_proto.c  |    8 +-
> >  .../intel/qat/qat_common/adf_pfvf_utils.h     |   11 +
> >  drivers/crypto/intel/qat/qat_common/adf_rl.c  |   10 +-
> >  drivers/crypto/intel/qat/qat_common/adf_rl.h  |    2 +
> >  .../crypto/intel/qat/qat_common/adf_sriov.c   |    7 +-
> >  .../intel/qat/qat_common/adf_transport.c      |    4 +-
> >  .../crypto/intel/qat/qat_common/qat_mig_dev.c |  130 +++
> >  .../qat/qat_dh895xcc/adf_dh895xcc_hw_data.c   |    1 +
> >  .../qat_dh895xccvf/adf_dh895xccvf_hw_data.c   |    1 +
> >  drivers/vfio/pci/Kconfig                      |    2 +
> >  drivers/vfio/pci/Makefile                     |    2 +
> >  drivers/vfio/pci/qat/Kconfig                  |   12 +
> >  drivers/vfio/pci/qat/Makefile                 |    3 +
> >  drivers/vfio/pci/qat/main.c                   |  662 +++++++++++
> >  include/linux/qat/qat_mig_dev.h               |   31 +
> >  38 files changed, 3344 insertions(+), 387 deletions(-)
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_gen2_hw_csr_data.c
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_gen2_hw_csr_data.h
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_gen4_hw_csr_data.c
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_gen4_hw_csr_data.h
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_gen4_vf_mig.c
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_gen4_vf_mig.h
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_mstate_mgr.c
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/adf_mstate_mgr.h
> >  create mode 100644 drivers/crypto/intel/qat/qat_common/qat_mig_dev.c
> >  create mode 100644 drivers/vfio/pci/qat/Kconfig
> >  create mode 100644 drivers/vfio/pci/qat/Makefile
> >  create mode 100644 drivers/vfio/pci/qat/main.c
> >  create mode 100644 include/linux/qat/qat_mig_dev.h
> > 
> > 
> > base-commit: 318407ed77e4140d02e43a001b1f4753e3ce6b5f
> > -- 
> > 2.18.2  
> 
> Patches 1-9 applied.  Thanks.

Hi Herbert,

Would you mind making a branch available for those in anticipation of
the qat vfio variant driver itself being merged through the vfio tree?
Thanks,

Alex





[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]
  Powered by Linux