Hardware V3 could be able to drain function by sending mailbox
to hardware which will trigger tasks in device to be flushed out.
When the function is reset, the function can be stopped by this way.
Signed-off-by: Weili Qian <qianweili@xxxxxxxxxx>
---
drivers/crypto/hisilicon/qm.c | 40 ++++++++++++++++++++++++++++-------
include/linux/hisi_acc_qm.h | 2 ++
2 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 4b20b94e6371..3b015482b4e6 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -312,6 +312,7 @@ static const struct hisi_qm_cap_info qm_cap_info_comm[] = {
{QM_SUPPORT_DB_ISOLATION, 0x30, 0, BIT(0), 0x0, 0x0, 0x0},
{QM_SUPPORT_FUNC_QOS, 0x3100, 0, BIT(8), 0x0, 0x0, 0x1},
{QM_SUPPORT_STOP_QP, 0x3100, 0, BIT(9), 0x0, 0x0, 0x1},
+ {QM_SUPPORT_STOP_FUNC, 0x3100, 0, BIT(10), 0x0, 0x0, 0x1},
{QM_SUPPORT_MB_COMMAND, 0x3100, 0, BIT(11), 0x0, 0x0, 0x1},
{QM_SUPPORT_SVA_PREFETCH, 0x3100, 0, BIT(14), 0x0, 0x0, 0x1},
};
@@ -1674,6 +1675,11 @@ static int qm_ping_pf(struct hisi_qm *qm, u64 cmd)
return ret;
}
+static int qm_drain_qm(struct hisi_qm *qm)
+{
+ return hisi_qm_mb(qm, QM_MB_CMD_FLUSH_QM, 0, 0, 0);
+}
+
static int qm_stop_qp(struct hisi_qp *qp)
{
return hisi_qm_mb(qp->qm, QM_MB_CMD_STOP_QP, 0, qp->qp_id, 0);
@@ -2088,7 +2094,8 @@ static int qm_drain_qp(struct hisi_qp *qp)
static int qm_stop_qp_nolock(struct hisi_qp *qp)
{
- struct device *dev = &qp->qm->pdev->dev;
+ struct hisi_qm *qm = qp->qm;
+ struct device *dev = &qm->pdev->dev;
int ret;
/*
@@ -2104,11 +2111,14 @@ static int qm_stop_qp_nolock(struct hisi_qp *qp)
atomic_set(&qp->qp_status.flags, QP_STOP);
- ret = qm_drain_qp(qp);
- if (ret)
- dev_err(dev, "Failed to drain out data for stopping!\n");
+ /* V3 supports direct stop function when FLR prepare */
+ if (qm->ver < QM_HW_V3 || qm->status.stop_reason == QM_NORMAL) {
+ ret = qm_drain_qp(qp);
+ if (ret)
+ dev_err(dev, "Failed to drain out data for stopping qp(%u)!\n", qp->qp_id);
+ }
- flush_workqueue(qp->qm->wq);
+ flush_workqueue(qm->wq);
if (unlikely(qp->is_resetting && atomic_read(&qp->qp_status.used)))
qp_stop_fail_cb(qp);
@@ -3112,16 +3122,29 @@ int hisi_qm_stop(struct hisi_qm *qm, enum qm_stop_reason r)
down_write(&qm->qps_lock);
- qm->status.stop_reason = r;
if (atomic_read(&qm->status.flags) == QM_STOP)
goto err_unlock;
/* Stop all the request sending at first. */
atomic_set(&qm->status.flags, QM_STOP);
+ qm->status.stop_reason = r;
- if (qm->status.stop_reason == QM_SOFT_RESET ||
- qm->status.stop_reason == QM_DOWN) {
+ if (qm->status.stop_reason != QM_NORMAL) {
hisi_qm_set_hw_reset(qm, QM_RESET_STOP_TX_OFFSET);
+ /*
+ * When performing soft reset, the hardware will no longer
+ * do tasks, and the tasks in the device will be flushed
+ * out directly since the master ooo is closed.
+ */
+ if (test_bit(QM_SUPPORT_STOP_FUNC, &qm->caps) &&
+ r != QM_SOFT_RESET) {
+ ret = qm_drain_qm(qm);
+ if (ret) {
+ dev_err(dev, "failed to drain qm!\n");
+ goto err_unlock;
+ }
+ }
+
ret = qm_stop_started_qp(qm);
if (ret < 0) {
dev_err(dev, "Failed to stop started qp!\n");
@@ -3141,6 +3164,7 @@ int hisi_qm_stop(struct hisi_qm *qm, enum qm_stop_reason r)
}
qm_clear_queues(qm);
+ qm->status.stop_reason = QM_NORMAL;
err_unlock:
up_write(&qm->qps_lock);
diff --git a/include/linux/hisi_acc_qm.h b/include/linux/hisi_acc_qm.h
index 5f4c74facf6a..720f10874a66 100644
--- a/include/linux/hisi_acc_qm.h
+++ b/include/linux/hisi_acc_qm.h
@@ -43,6 +43,7 @@
#define QM_MB_CMD_CQC_BT 0x5
#define QM_MB_CMD_SQC_VFT_V2 0x6
#define QM_MB_CMD_STOP_QP 0x8
+#define QM_MB_CMD_FLUSH_QM 0x9
#define QM_MB_CMD_SRC 0xc
#define QM_MB_CMD_DST 0xd
@@ -151,6 +152,7 @@ enum qm_cap_bits {
QM_SUPPORT_DB_ISOLATION = 0x0,
QM_SUPPORT_FUNC_QOS,
QM_SUPPORT_STOP_QP,
+ QM_SUPPORT_STOP_FUNC,
QM_SUPPORT_MB_COMMAND,
QM_SUPPORT_SVA_PREFETCH,
QM_SUPPORT_RPM,
--
2.33.0
